Richard Blevins

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

croc

Link

this is a spin on the slim wallmount by someone else but in ultra slim for an even lower profile on the walldiffrent sizes comming soon

ultra slim universal wall mount

tools and fittings

GlennovitS 3D

Like football on the big screen? Then maybe print a couple of these and bring football onto the table! Play against friends and family. Use a couple of cups/glasses/other stuff to make up the goals in the size you find best and let the game begin!<figure class="image image_resized image-style-align-right" style="width:357px;"><img src="https://media.printables.com/media/prints/696656/rich_content/0d849408-f016-454e-8aa3-05ecea92041e/game-example-optim.gif"></figure><h2>Overview</h2>The kit is made of a few simple prints:<ul><li>Football shoe (on piece - print 1-2 pr. player)</li><li>Football (made of 2 half’s and a pin to align them while the glue is drying)</li></ul><h2>Assembly</h2>The football shoes are printed in one go - no assembly there.The football is printed in 2 halfs + an optional pin to align them while you glue the 2 parts together!<h2>Print instructions</h2>This is a normal small print job. But a few ideas as always:<ul><li>Speed: Small items dont need lightening speeds - slow down here for better quality</li><li>Colors: Can of course be printed in a single color. I painted them in Bambu Studio and printed with the AMS. Take way longer - but they look nice :-)</li><li>Infill: The more infill in the ball, the heavier - pick what you like.</li></ul>Happy printing!<h2>Want to show your support?</h2>You can see all my designs on Printables - and you can become an active supporter. I would really appreciate it!<a target="_blank" href="https://www.printables.com/@GlennovitS3D" rel="nofollow noopener">https://www.printables.com/@GlennovitS3D</a>

Finger Football Kit (soccer game on the table!)

云端的风

***It is recommended to print using the configuration of the file, without making changes to it, except for filament*** The central shaft may need to be polished before it can be assembled properly. If possible, it is recommended to use high-hardness consumables (I used Esun magic dual-color filaments, which are both beautiful and have very high hardness) The model in the file has multiple color settings. If you don&#39;t have AMS, you can also try manually changing the material for printing (only 4 color changes are required), or print a single color Additional purchases are required: Yo-Yo ball bearings (typically 12.7*6.35*4.76mm in size), and a 19mm outer diameter adhesive sticker or use silicone to fill the area where the adhesive sticker is attached (of course, there are also adhesive sticker models in the file, you can also choose to print it using TPU filament, although it may not be as easy to use as purchasing one)***建议使用文件的配置进行打印，不要对其进行更改，除了耗材***中轴可能需要进行打磨才能正常组装，如果可以建议使用高硬度的耗材（我使用了esun的魔幻双色耗材，既好看又有着非常高的硬度）文件中模型有多色设置，如果你没有AMS你也可以尝试手动换料进行打印(只需要进行4次换色），或者打印单色的需要额外购买：悠悠球轴承（尺寸一般是12.7*6.35*4.76mm），和外径19mm的胶贴或者使用硅胶填充粘贴胶贴的区域（当然，文件中也有胶贴的模型，你也可以选择使用tpu打印它，虽然可能不如购买的好用）

3Dprint Yoyo 2.0ver bigger and wider 悠悠球 更大更宽版本

Richard 

hubuki

Just a mini stove. Pairs well with mini furniture.

Mini Stove/Cooking Oven

tamara

tropicgtiturbo

lightbox of the vans flaming skateboard logo. last plate is for no lights.

vans flaming skateboard logo lightbox/ wall art

skate

Dadpool Designs

He's a cute little sloth that needed some multicolor love, so I painted him up and gave him some fuzziness. 4 color, all set to go! Credit to <a target="_blank" href="https://www.printables.com/@WhitneyRichmond" rel="nofollow noopener">https://www.printables.com/@WhitneyRichmond</a> for the fun little model!

croc

tools and fittings

fun

Richard

tamara

skate

Jenny