BlackAdder

xerko

UNO Reverse ? No, this is UNO MIDDLE FINGER！&nbsp;Print with 0.4 or 0.2 nozzle.Each profile are available now.&nbsp;For 0.4 nozzleAt layer #4(0.8mm) swap to any color you want.At layer #5(1.0mm) swap to Black.&nbsp;For 0.2 nozzleAt layer #7(0.mm) swap to any color you want.At layer #9(0.9mm) swap to Black.&nbsp;Setting Suggestion For Both Nozzle Size：Arachne wall generator0.95 top flow rate&nbsp;Size: 56*87mm-----<a target="_blank" href="https://makerworld.com/en/models/457401#profileId-365407" rel="nofollow noopener">Double side &amp; face down version is now available here.</a>

Middle Finger Uno Card

0.2 nozzle

Binrux3D

&nbsp;&nbsp;&nbsp;Model:&nbsp;Crazy desk marble fidget toy! This took way too long to design and prototype, I hope it shows!&nbsp;Printing:&nbsp;Use provided print profiles for best results! I&#39;ve tested sizes down to 35% which have still worked, but I&#39;m only including the 100% and 50% versions as print profiles. If you want the 35% or 75% feel free to scale the print profile, or download the included STL:s.&nbsp;Print profile which is full sized is actually scaled to 98% of the original model so it can fit A1 mini plate. full sized ball is also scaled to 98%. Either way this model works with pretty much any scaling (down to 35%)! Just add the same scale to the ball and model and you should be golden!&nbsp;Print does not require any supports or assembly. Works straight out the bed!&nbsp;!IMPORTANT!&nbsp;The ball needs to be cleaned after printing from all of the support residue. Use side cutters or a knife to get it round!&nbsp;Hope you enjoy the model!&nbsp;BONUS&nbsp;Check out my latest marble creations! &nbsp;<a target="_blank" href="https://makerworld.com/en/models/464194#profileId-372921" rel="nofollow noopener">Crazy Marble Fidget Toy V2</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-14_cc9d379e79ec.gif">&nbsp;<a target="_blank" href="https://makerworld.com/en/models/441052#profileId-346770" rel="nofollow noopener">Smooth Marble run:</a> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-04-25_7fbdd6872b67e.gif">&nbsp;&nbsp;<a target="_blank" href="https://makerworld.com/en/models/450626#profileId-357615" rel="nofollow noopener">Crazy Skeleton Marble Track:</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000424581/design/2024-05-02_cd1ede4a92837.gif">&nbsp;

Print in place - Crazy marble fidget toy - no sup!

Marble run

Vivien L.

Made this based of Apple's modern take on the "Hello" logo in recent versions of macOS screensavers and as seen in Keynotes.

Apple Modern Hello

APPLE

Fletch

Is it dumb? Yes. Am I dumber for making it? Maybe. Now you can enjoy the weirdness of the Mutt Cutts van from the movie Dumb and Dumber. Relive your favorite moments with Lloyd Christmas and Harry Dunne. It will not tell you what the most annoying sound in the world is unfortunately.&nbsp;Fits all Bambu printer build plates and is easy to assemble.&nbsp;Assembly<ol><li>Insert the rims into each of the tires and attach to the chassis.</li><li>Attach side walls.</li><li>Bend the rear wall and attach.</li><li>Add the roof and windshield.</li><li>Attach the grill.</li><li>Attach the tongue.</li><li>Attach the hood.</li><li>Attach the dog parts and signs the side walls and roof. If printing a single color, pay attention to the direction of the signs.</li></ol>&nbsp;&nbsp;

Mutt Cutts Van Kit Card - Dumb & Dumber

CARS PLANES SPACE

Easter

3DMN

Unleash the XX-10 Turbo Laser Tower, the ultimate defense in your Star Wars Legion battles! Commanding power and precision, this formidable addition boasts unrivaled accuracy and devastating firepower. Dominate the battlefield with its advanced targeting system and unparalleled range.

Star Wars Turbo Laser Tower (Legion XX-10)

Star Wars

planes01

<h3>Model</h3><h3>Overview</h3>SR-71 kit card that was created to showcase a true aviation engineering marvel and is an inspiration for kids and adults of all ages in pursuit of science, technology, engineering, and math (STEM). This particular model uses color and sliced 3D format to really bring a highly contoured airplane to life upon assembly. The kit format is great for gifting the model to engineering clubs, friends, family, or coworkers that enjoy building and showcasing aviation engineering history. The kit includes a stand that is assembled to display the model.&nbsp;Check out the <a target="_blank" href="https://makerworld.com/en/models/199176" rel="nofollow noopener">SR-71</a>, <a target="_blank" href="https://makerworld.com/en/models/242106" rel="nofollow noopener">B-52</a>, <a target="_blank" href="https://makerworld.com/en/models/436445" rel="nofollow noopener">A-10</a>, <a target="_blank" href="https://makerworld.com/en/models/402126" rel="nofollow noopener">787</a>, and <a target="_blank" href="https://makerworld.com/en/models/405459" rel="nofollow noopener">Darkstar</a>!Check out the full airplane kit card collection → <a target="_blank" href="https://makerworld.com/@planes01/collections/991821" rel="nofollow noopener">linked here</a>!<h3>Profiles</h3><ul><li>Small Kit with Frame<ul><li>small plane kit with frame ideal for gifting to others</li></ul></li><li>Large Kit with Frame<ul><li>large plane kit with frame ideal for gifting to others</li></ul></li><li>Small Model Pieces<ul><li>small plane without frame ideal for assembly right off the printer</li></ul></li><li>Large Model Pieces<ul><li>large plane without frame ideal for assembly right off the printer</li></ul></li></ul><h3>Filament</h3>As shown:<ul><li>Bambu Lab PLA Black</li><li>Overture PLA Cement Gray</li><li>Overture PLA Space Gray</li><li>Esun PLA+ Fire Engine Red</li></ul><h3>Tips</h3><ul><li>Model requires close tolerances to ensure snug but not tight or loose fit<ul><li>Make sure the model cools to room temperature before assembly</li><li>Ensure filament is properly calibrated with no excessive over extrusion</li></ul></li><li>Ensure good bed adhesion<ul><li>Make sure printer is fully calibrated</li><li>Make sure print bed is clean &amp; dry (soapy water is my favorite for cleaning - simple &amp; works)</li><li>Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)</li><li>Cooling &amp; Temps - make sure they are correct for your printer, build plate, and filament</li></ul></li></ul><h3>Assembly</h3><ul><li>Remove all pieces from the kit</li><li>Debur as needed to smooth edges</li><li>Insert connector between engine halves<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_81f8b94fa9812.jpg"></li></ul></li><li>Press engine halves together<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_499c3e2a6c543.jpg"></li></ul></li><li>Insert engine into fuselage (snaps together). Note LHS &amp; RHS engine positions below!<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_5e37007ed5a03.gif"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_2572f2daa805a.jpg"></li></ul></li><li>Insert outboard wing into engine (snaps together)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_582fe33443f7.jpg"></li></ul></li><li>Insert vertical tail into engine (snaps together; recommend to insert aft end of vertical tail first and then press down on forward end)<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-24_02853c5841433.jpg"></li></ul></li><li>Place airplane onto stand<ul><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-02-25_3244aa356b7fb.jpg"></li></ul></li><li>Enjoy!</li></ul>&nbsp;<h3> FAQ</h3><ul><li>How do you make the airplane kit card models?<ul><li>Fusion 360! All of my models are created by me in a CAD environment. I love to design &amp; print my creations!</li><li>Here is a view of this SR-71 model showing sketches &amp; bodies!</li><li><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000199176/design/2024-03-05_8bcb3d1b0e6e1.png"></li></ul></li><li>How can I learn how to make kit card?<ul><li>Learn the tools &amp; keep exploring! (YouTube is a great starting place)</li><li>The basic steps:<ul><li>Create sketch for each of the major components: wing, fuselage, vertical tail, joints, etc..</li><li>Create solid bodies using those sketches (extrusions, lofts, etc…)</li><li>Add any details like blends, fillets, chamfers</li><li>Create the stand over the center-of-gravity (note the maker point on the image above!)</li><li>Fine tune tolerances in the joint (here is where a lot of 3D printing prototyping comes into play!)<ul><li>Fun Fact: This SR-71 had 6 prototypes before publishing to the community</li></ul></li><li>Add kit frame</li></ul></li></ul></li></ul>

SR71 Kit Card

Card Kits

NoycePrints

Here is a collection of handy attachments for the Dum-E desk helper. All are simple to connect to the wrist, requiring only a single M3x10mm countersunk screw to secure. I aim to publish more adapters and attachments as time goes on. Let me know if there's anything in particular you would like to see made available. &nbsp;Included are the followingPhone standBusiness card holderElastic band powered gripperLogitech c920 Webcam clampLamp attachment&nbsp;Required for assembly&nbsp;Phone standPrint stand parts 1x Backing and Bottom. Recommend 20-30% infill for both. No supports. Screws required: 2 M3x10mm countersunk screws. &nbsp;Business card holderPrint card holder parts 1x left arm, right arm, backing and base. Recommend 20-30% infill for each. No supports.Screws required:2x M2.5x8mm countersunk screws.2x M3x10mm countersunk screws.&nbsp;Webcam mount for Logitech C920Print webcam mount parts A and B. Recommend 20-30% infill for both. No supports.Screws required:2x M3x10mm countersunk screws. Gripper attachmentParts to print:Gripper left x 1Gripper right x 1Gripper frame x 1Gripper connecting arm x 8Recommend 30% infill, no supports.Screws required:16x M3x8mm countersunk screws.1x small elastic band (if you want it to function) This slots into groves on the sides of the arms. Desk Lamp AttachmentParts to print:1xLamp attachment1xBambulab LED lamp Kit 001Optional 2x M3x5mm screwsPrint at 15-20% infill&nbsp;Coming soon: <ul><li>Stationary holder.</li><li>Helping hands for electronics soldering.</li></ul>&nbsp;&nbsp;

Dum-E optional attachments.

Dum-E

J3DPS

Quick little sign for St. Patrick's Day.

Shamrock Love

St. Patricks

happyboard.company

The Version 2 of the swirled lamp shade I created.&nbsp;Its as easy to print, as the first version. Orient it upside down and hit print. Set the seam alignment to random for a better result.&nbsp;You'll also need the LED Hardware Kit 001 adapter and the hardware Kit 001 itself. You can find a print profile of of the adapter on this page, or you can download it from the official Bambu Labs account. I altered the bajonette adapter for a quite tight fit. You will need some force to get it into place, but it will fit tight and snug. &nbsp;I used Bambu Lab PLA Marble for this lamp. &nbsp;0.2 mm layer height3 walls22% gyroid infill

Swirled Lamp Shade V2 for LED Kit 001

Lamps

Galactic Armory

Print your own scale model Clone Trooper!&nbsp;&nbsp;This model comes in 2 pre-exported scales - 1:12 and 1:48&nbsp;&nbsp;The 1:48 scale model is more geared towards resin printing for wargaming but the 1:12 model works great for printing on an FDM printer!&nbsp;&nbsp;Find 19 other poses for this figurine with alternate heads on my Patreon:<a target="_blank" href="https://patreon.com/galacticarmory" rel="nofollow noopener"> https://patreon.com/galacticarmory</a>

Clone Trooper Figurine - Heavy

star wars

UseLess Engineering

Hop on board and take to the air… or the sea??&nbsp;With our new patented Benchy A300 from UseLess engineering you can have the best of both worlds soring over the Atlantic or in the event of an engine failure we can sail.&nbsp;Back to real land, the model needs supports to print properly, I have included them in the bambu studio file but if you are printing from the raw model I used supports on the bottom only and you should too. I have also included a model that uses 4 colours - silver, white, red and green. you are welcome to use any colours, its all a bit of fun. Have fun printing you silly engineers.<img src="https://makerworld.bblmw.com/makerworld/draft/605989/2023-11-26_4ba96dece4a58.gif">UseLess Engineering<img src="https://makerworld.bblmw.com/makerworld/draft/605989/2023-11-26_bb091bc234fda.png">

Benchy A300

Benchy

TOMF00LRY

This is a platform 9 ¾ sign from Harry Potter. The sign can be printed twice for a double sided sign, or once for single sided. The arm of the hanger needs to be mirrored and both sides printed to use the wall mounted bracket. The bracket is designed to be easy to hang, then the arm slid in from the top with a dovetail joint.&nbsp;These are the chains i used to hang the sign <a target="_blank" href="https://www.amazon.com/dp/B0B5JRVS8S?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.com/dp/B0B5JRVS8S?ref=ppx_yo2ov_dt_b_product_details&th=1</a>I had to use pliers to straighten the hooks, feed them through the holes, then bend them back.&nbsp;***update*** made the sign thinner to use less filament, as well as made each color start at a specific height for color changing without an AMS. Also, the holes in the hanger and the sign were made larger to fit a chain more easily.

Platform 9 3/4 hanging sign

potter

Bearded Dad Designz

Made these awesome gnome magnets for Christmas decorations and figured I would share them, &nbsp;For the magnet part I used a 20x3 magnet and some glue to secure it.

Christmas Gnome Magnet Pac

xmas

Black Jack

<h2>Summary</h2>I am very thankful to <a target="_blank" href="https://www.printables.com/@BenoitLussier" rel="nofollow noopener">Mr Benoît Lussier</a> for his feedbacks which has helped me refine the model further. <img src="https://makerworld.bblmw.com/makerworld/draft/518190/2024-02-05_bfcf275291314.gif"><h2>There are three ways to print this.</h2><ol><li>As single piece:- Please download STL file but there wont be any movements.</li><li>Multiple Pieces :- Download 3mf file with Full_dismantled.3mf. BEST QUALITY OUTPUT. Please use the 3mf file for assembly also.</li><li>Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this.</li></ol><blockquote><h2>Upgraded Cylinders & Pistons</h2>I have upgraded the cylinders and pistons to allow locking of the front loader arm and buckets at different position by using a small piece of 1.75mm filament. Please see the GIF image for details. This locking can only be done for static displays. I haven't upgraded the original model 3mf file or the print profile, instead I had added seperate 3mf files and profile for the upgraded parts. This has been intentionally done to get feedbacks from the makers before making the upgrades permanent. It also gives the user freedom to choose how to make. This also help those who have already made the model to make upgrades. Those interested in upgrades can look for the profile with the name “upgraded cylinders and pistons” or 3mf file.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/518190/2024-02-10_9ac350010b4da.gif"></figure></blockquote><h2>ASSEMBLY OF MAIN BODY</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/518190/2023-10-20_aa7387dcc762.gif"></figure><h2>ASSEMBLY OF FRONT LOADER</h2><figure class="image"><img src="https://media.printables.com/media/prints/570824/rich_content/ee18a9f9-7047-4e93-8143-c3cefa6495ec/ld.gif#%7B%22uuid%22%3A%2215005cae-6a16-4329-bf35-bc951f4db4d7%22%2C%22w%22%3A800%2C%22h%22%3A450%7D"></figure><h2>MATING OF MAIN BODY AND FRONT LOADER</h2><figure class="image"><img src="https://media.printables.com/media/prints/570824/rich_content/caf701cf-7855-4212-8ebb-4af4e70e1889/ezgif-4-119f29bca1.gif#%7B%22uuid%22%3A%2219867a17-8e18-4375-bd00-91a232bb5466%22%2C%22w%22%3A800%2C%22h%22%3A410%7D"></figure><h2>Movements Included</h2><ol><li>Front Section Rotation</li><li>All Wheel Rotation</li><li>Front Loader Full Movement</li><li>Engine Bay Doors</li></ol>The main body is made hollow to ensure filament savings.The screws are need to fix the front and back axles which are also marked.The front loader assembly is made up of pins of same size but there could be tolerances issues when you print. So I insist that you first test print a pin and try the fit and accordingly scale down or up the pin.Supports should be provided as required.Appreciate the makes uploads.Open for suggestions.<h3>This model has been refined with the inputs and support of <a target="_blank" href="https://www.printables.com/@BenoitLussier" rel="nofollow noopener">Benoît Lussier</a></h3><a target="_blank" href="https://www.buymeacoffee.com/blackjack123" rel="nofollow noopener"><img src="https://www.buymeacoffee.com/assets/img/guidelines/download-assets-sm-1.svg" alt="Alt text"></a>  <a target="_blank" href="https://www.patreon.com/BlackJack123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/518190/2024-02-10_833e9bfdbf3.png"></a>

Yellow Front Loader with Movements

models

harrypulvirenti

It is basically an optimisation of the original design but is functionally the same. This remix eliminates a rear wall to use less material and makes overhangs less pronounced to make the model easier to be printed. I strongly recommend using brim to print it if you don't want to see the heel fall.You can find the suggested orientation used to print the object in the images.With the proposed orientation the object should fit without scaling it, you will maybe just need to move it a little bit into position, but some user reported that scaling it down to 95% also works well. &nbsp;I tested it with my X1C and is perfectly compatible. About the P1P the original model was compatible with the P1P without enclosure and this remix have the same compatibility

Bambu Lab - Filament Poop Bin - X1, X1C, P1P and P1S

thrutheframe

<h3>NOTE:</h3><ul><li>Please read the instruction guide below.</li><li>Download the 3mf file if you are using a Bambu slicer. Download the stl if you are using other slicers.</li><li>I do my best to double-check and test the print profiles I created. They are up to date with whatever changes I make. If you are using profiles made by others, please check if they are updated.</li></ul>&nbsp;<h3>UPDATE 24 Nov 2023</h3>Previous writeup - “…One of the ideas was to attach a bin/basket on the end of the cantilever x-axis. But based on experience with cantilever printers, it is never a good idea to hang a bin/basket at the extreme end of the X-axis extrusion, regardless of how robust the Z-axis linear rail is… ”&nbsp;I was not entirely right. While hanging a bin/basket at the end of a cantilever was never a good idea, attaching a lightweight guide/baffle is a very good idea. I looked at the designs by others and CAD what I think is a combination of what was good. Together with a shorter bin, I added Option 3 - Short Bin with <a target="_blank" href="https://makerworld.com/en/models/72654#profileId-77178" rel="nofollow noopener">Pruge Guide</a>. I have updated this project's 3mf file.&nbsp;The short bin uses the same magnetic docking system. So you will still need to print the magnetic docks D1 (plate 1).&nbsp;In addition, I have also increased the capacity of the bin without an increase in footprint.<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_0bf6f9d142792.png"></figure></td><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_ab21b4e9da909.png"></figure></td></tr></tbody></table></figure>&nbsp;This is the first of three designs by Thrutheframe for A1 mini. The 3 essential printable accessories that you will need for your new printer.<ol><li>A1 mini Poop Management System (PMS)</li><li><a target="_blank" href="https://makerworld.com/en/models/28311#profileId-24696" rel="nofollow noopener">A1 mini Build Plate Stand</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28319#profileId-24702" rel="nofollow noopener">A1 mini Scraper and Stylus Holder</a></li></ol>While the hardware for all 3 builds can be self-sourced, I am working with <a target="_blank" href="https://veetec3d.etsy.com/listing/1583763119/a1-mini-accessories-hardware-kit" rel="nofollow noopener">Veetec3D to offer an A1 mini Hardware Kit</a> for all the 3 builds above. It will include the 6x3mm magnets, M3 screws, VHB, thin double-sided tapes, and pre-cut self-adhesive anti-slip pads. Printed parts are not included.&nbsp;The price is 10€ with tracked shipping at 5€. We try our best to keep the pricing affordable for everyone to have easy access to the required hardware for all 3 builds. In addition, parts and labour are sourced within EU. If you like the designs by ThrutheFrame and wish to support his projects, do consider buying this kit. A small royalty will go towards funding project consumables ie. filaments, materials, electricity, coffee, time, software subscription, etc&nbsp;<h3>INTRODUCTION</h3>While unboxing my A1 mini combo, I noticed it needs a Poop Management System (PMS) to collect the filament poop during purging.The simple yet futuristic design of the A1 mini fuels my imagination and hence, my design for the PMS takes on the look and feel of a space station and docking bay.As the A1 mini may be the user's first 3D printer, I set up a few parameters when designing PMS:<ul><li>Aesthetically pleasing (to me), Easy to print/assemble and Fun to use.</li><li>Optimize print time and filament usage</li><li>Must fit onto the A1 build plate of 180x180x180mm</li><li>Will not cause accidental purge clogging</li><li>No support needed</li><li>Printed in PLA.</li></ul>&nbsp;There are 3 PMS options:<ul><li>Option 1 - An eco-friendly design using the filament cardboard box as a ReCycle PMS.</li><li>Option 2A - A fully printed Bin</li><li>Option 2B - For users who print extensively, a printed Chute to guide the poop down into your regular waste bin</li><li>Option 3 - A short bin with a purge guide/baffle that is attached to the purge wiper (recommended)</li></ul>&nbsp;You will need to print a pair of docking bays (D-1) which the PMS will be connected to the A1 mini printer.All the above PMS are magnetically attached with Ø6x3 magnets to the D-1 docking bays.The D-1 will be secured to the A1 mini printer using VHB tapes (or similar mounting tape that is 1mm in thickness).&nbsp;<figure class="image image_resized" style="width:50.09%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-25_64c946113b006.png"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_7c8a4c70fff1a.png"></figure>&nbsp;<h3>BOM</h3><ol><li>Ø6x3 magnets - 8pcs</li><li>1mm VHB tape (10x20mm) - 4pcs</li><li>Thin double-sided tape - For ReCycle Bin only</li></ol>** Note that the VHB tape (or any double-sided tape) has to be 1mm thick. This is because the recess I made is 0.8mm, allowing the dock to flush with the printer.&nbsp;<h3>INSTRUCTIONS</h3>Download the 3mf file. The settings are prepared for printing PLA on an A1 mini. If you are printing on a different printer, please make the necessary changes to the settings.The STLs are also available in folders.I designed the parts based on 0.4mm nozzle and 0.2mm layer height. Print in 0.2mm layer height for accuracy.Print plate 1 - Docking bracket. Both front and back docking brackets are required.Print either Option 1, 2A/2B or 3 depending on the configuration you want.If you are using Option 2A/2B. You will need to print plate 3 - Shield top.If you are using Option 3, you will need to print plates 6 & 7<figure class="image image_resized" style="width:60.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_75bf1beab3e79.png"></figure>&nbsp;Docking Bracket (D-1)<ul><li>Press fit the Ø6x3mm magnets into the docking bracket. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity of all the magnet are facing in the same direction.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_1a49a648dbdd6.png"></figure>&nbsp;<ul><li>Paste the VHB tapes onto the docking bracket.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_4c335b1b1604d.png"></figure>&nbsp;Option 1 - ReCycle Bin<ul><li>Press fit the Ø6x3mm magnets into the ReCycle brackets. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_m65ncfzfjsze.png"></figure>&nbsp;<ul><li>To attach the spool box, place double-sided tapes on the inner side of ReCycle brackets.</li><li>The dimension of the bracket is based on Bambu Lab filament with spool cardboard box. There might be some size differences with other brands' boxes, but the double-sided tape should hold it well.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_vwvwl5p02bed.png"></figure>&nbsp;<ul><li>Cut the spool box according to the dimensions as seen in the image. No more than 55mm from the bottom and no less than 100mm wide.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_3mxezvsmjkis.png"></figure>&nbsp;<ul><li>Install spool box to ReCycle brackets</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_mrjcdjvanqw3.png"></figure>&nbsp;Option 2A Bin & 2B Chute<ul><li>Press fit the Ø6x3mm magnets into the bottom piece. The holes are designed for press fitting, hence they are tight-fitting. Please ensure that the polarity is correct. It should be attracting the D-1 bracket.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_1lf2xxu3vhu2.png"></figure>&nbsp;<ul><li>Glue the top and bottom pieces together. The tongue and grove design will assist in alignment.</li></ul><figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_fm7yr0fxfedn.png"></figure>&nbsp;Option 3 - Short Bin with Pruge Guide<ul><li>In addition to plate 1, you have to print plates 6 & 7.</li><li>Install the magnets the same way as all the other bins</li><li>Paste a piece of tape over the area as shown in the image below. During purging, the tip of the purge can still be molten and can accidentally adhere to the wall. The tape helps to reduce the chance of this happening.</li></ul><figure class="image image_resized" style="width:477.812px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_9f22dcecbc243.png"></figure><ul><li>Install image</li></ul><figure class="image image_resized" style="width:477.571px;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-11-24_6724c482cd6c7.jpg"></figure>&nbsp;&nbsp;Installing to the Printer<ul><li>Home and turn off printer. Push the toolhead all the way to the left of the X-gantry.</li><li>Attach the D-1 brackets to the ReCycle/Bin/Chute.</li><li>Align it with the X-gantry, make sure the poop will drop into the ReCycle/Bin/Chute and stick the D-1 bracket to the printer body.</li><li>Note that part of the D-1 bracket will slide under the printer.</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-23_5900afd4bb049.png"></figure>&nbsp;<figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_qv4fqhizk58s.jpg"></figure><figure class="image image_resized" style="width:49.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/234202/2023-09-22_ciofeugx7tly.jpg"></figure>&nbsp;<ul><li>Turn on the printer and do a homing. Watch and check. The poop shooter should not be pressing down on any part during homing.</li><li>Enjoy a neat and poop-less work table.</li></ul>&nbsp;<h3>VIDS & PICS</h3>Modbot showcased the ReCycle bin version on his A1 stream. Scroll to 26 minutes to see how it works.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=Fks_nOL2eys"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Fks_nOL2eys" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Modbot showcased the bin version 2A, the build plate holder and the stylus+scraper holder.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=P4EphELNuw8&t=211s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/P4EphELNuw8?start=211" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like what I designed and want to contribute to my coffee addiction, software subscription and filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;Another way is to purchase the kit (TBA) from my vendor, we try to make it affordable and a small amount goes to supporting this project in terms of development consumables ( filaments, electricity, coffee, time and my brain cells)&nbsp;<h3>CAVEAT</h3>As with all my designs, Prototyping and testing were conducted to ensure printability and meet my own expectations. However, I understand it may and may not work for you. I would request that you read all instructions and print and install them at your own discretion.

A1 Mini Purge Bucket Bin Poop Management System Bambu Lab

FallenAngel

Suspended 2 (Mario Terrain 1)

Floating

Nils N3DP

My First try from a hueforge Picture

HueForge Halloween  Night Tree 

HueForge

LordBoos

Scary Halloween Mansion - HueForge.<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmYou can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA Gratkit Gray Transmission Distance: 1</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #20 (1mm) swap to Blue Gray</li><li>At layer #35 (1.6mm) swap to Gray</li><li>At layer #38 (1.72mm) swap to White for the rest.</li></ul>