Big Texas

NxtGnPrtHub

<p><strong>English:</strong><br>Container Benchy (floatable!).<br>Children like ships in the bathtub.<br>Unfortunately, the standard benchy doesn&#39;t float and sinks.<br>This “Contaner Benchy” can swim and also has the captain on board.<br><br><strong>Deutsch:</strong><br>Container Benchy (kann schwimmen).</p><p>Kinder mögen Schiffe in der Badewanne.<br>Das standard Benchy schwimmt leider nicht und geht unter.</p><p>Dieses &#34;Contaner Benchy&#34; kann schwimmen und hat zusätzlichen noch den Kapitän mit an Bord!</p>

Container Benchy (floatable!)

Benchys

3D servis

Best friend dog trophy (Low poly)

$ ideas

Lol3z 3D

<p>English:<br>Hello everyone, <br>I am very glad that many people liked the first comb model, so I decided to make another one hoping that you will also like it and find it useful.<br>Link of the first model:<strong> https://makerworld.com/it/models/120182#profileId-129398</strong></p><p>I printed the model in PLA, as it was suggested to me for the other model maybe the best material would be PETG, but I can assure you that in PLA it does its job very well.</p><p>Italiano:<br>Ciao a tutti, <br>sono molto contento che il primo modello del pettine sia piaciuto a molte persone, quindi ho deciso di farne un altro sperando che anche questo vi piaccia e vi possa essere utile.<br>Link del primo modello: <strong> https://makerworld.com/it/models/120182#profileId-129398</strong></p><p>Io ho stampato il modello in PLA, come mi è stato suggerito per l'altro modello forse il materiale migliore sarebbe il PETG, ma vi posso assicurare che in PLA fa egregiamente il suo lavoro.<br> </p>

Beard comb tool  / Pettine barba

need to print Ben

Iconic FAB

<h3>ABOUT THE RIG</h3><p><strong>The Rig is mostly printed DIY helper stand for testing  electronic components in an easy and accessible way.</strong></p><p>This stand is built mostly from printed parts with DIN 35mm rails to provide easy and accessible testing.</p><p>The rig uses heat-set inserts and M3 bolts for assembly.<br> </p><h3><strong>WHERE TO SOURCE MECHANICAL PARTS OF THE BUILD?</strong></h3><figure class="table" style="width:100%;"><table style="background-color:#E8404018;border-color:#E84040;border-style:solid;"><tbody><tr><td style="padding:20px;width:100%;"><h4>Self-source using BOM (bill of materials)</h4></td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><thead><tr><th style="width:90%;"><strong>Mechanical &amp; Electronic parts</strong></th><th style="text-align:center;width:10%;"><strong>QTY</strong></th></tr></thead><tbody><tr><td style="width:90%;"><strong>Mechanical</strong></td><td style="text-align:center;width:10%;"> </td></tr><tr><td style="width:90%;">M3x8 SHCS — Bolts || Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DD5xFM1" rel="nofollow noopener">[Link]</a></td><td style="text-align:center;width:10%;">26</td></tr><tr><td style="width:90%;">Threaded Inserts — M3x5x4 (M3 x OD:5 x L:4) <strong>||</strong><i><strong> </strong></i>Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DDjcgOZ" rel="nofollow noopener">[Link]</a></td><td style="text-align:center;width:10%;">26</td></tr><tr><td style="width:90%;">DIN Rail - 35mm wide, 7.5mm tall, Steel <strong>||</strong><i><strong> </strong></i>Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_DCxyXZP" rel="nofollow noopener">[Link]</a></td><td style="text-align:center;width:10%;">4</td></tr><tr><td style="width:90%;"> </td><td style="text-align:center;width:10%;"> </td></tr><tr><td style="width:90%;"><strong>Electronic</strong></td><td style="text-align:center;width:10%;"> </td></tr><tr><td style="width:90%;">IEC320 C14 inlet || Source [AC-01-02]: <a target="_blank" href="https://s.click.aliexpress.com/e/_DF7y3VX" rel="nofollow noopener">[Link]</a></td><td style="text-align:center;width:10%;">1</td></tr><tr><td style="width:90%;">C13 Power Cord || Source: <a target="_blank" href="https://s.click.aliexpress.com/e/_Dd57KIV" rel="nofollow noopener">[Link]</a></td><td style="text-align:center;width:10%;">1</td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table" style="width:100%;"><table><thead><tr><th style="width:100%;" colspan="2">Printed Parts</th></tr></thead><tbody><tr><td style="width:90%;">Printed parts</td><td style="width:10%;">13</td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table" style="width:100%;"><table style="background-color:#40C8E818;border-color:#E84040;border-style:solid;"><tbody><tr><td style="padding:20px;width:100%;"><h4><strong>R1.1 UPDATE — QUICK WALKTHROUGH</strong></h4></td></tr></tbody></table></figure><figure class="media"><div data-oembed-url="https://youtu.be/pXyl3s8IjaQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/pXyl3s8IjaQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p><strong>Watch on YouTube</strong>: <a target="_blank" href="https://youtu.be/pXyl3s8IjaQ" rel="nofollow noopener">https://youtu.be/pXyl3s8IjaQ</a><br> </p><figure class="table" style="width:100%;"><table style="background-color:#40C8E818;border-color:#E84040;border-style:solid;"><tbody><tr><td style="padding:20px;width:100%;"><h4><strong>R1.0 — VIDEO BUILD GUIDE</strong></h4></td></tr></tbody></table></figure><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=9JDYAqjfCVA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/9JDYAqjfCVA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p><strong>Watch on YouTube</strong>: <a target="_blank" href="https://www.youtube.com/watch?v=9JDYAqjfCVA" rel="nofollow noopener">https://www.youtube.com/watch?v=9JDYAqjfCVA</a></p><p>&nbsp;</p><figure class="table" style="width:100%;"><table style="background-color:#65C90018;border-color:#65C900;border-style:solid;"><tbody><tr><td style="height:50px;padding:20px;width:100%;"><h4><strong>PRINT GUIDELINES</strong></h4></td></tr></tbody></table></figure><p>Here are print guidelines for you to follow in order to have decent success with printing parts:</p><figure class="table" style="width:100%;"><table><tbody><tr><td style="width:50%;">3D PRINTING PROCESS</td><td style="width:50%;">FDM (fused deposition modeling)</td></tr><tr><td style="width:50%;">INFILL TYPE</td><td style="width:50%;">Support cubic (Legs); Grid (All other parts)</td></tr><tr><td style="width:50%;">MATERIAL </td><td style="width:50%;">ASA, ASA-CF, ABS, ABS+, ABS-CF</td></tr><tr><td style="width:50%;">INFILL PERCENTAGE </td><td style="width:50%;">21% (Legs); 41% (All other parts)</td></tr><tr><td style="width:50%;">LAYER HEIGHT</td><td style="width:50%;">Recommended: 0.2mm</td></tr><tr><td style="width:50%;">WALL COUNT </td><td style="width:50%;">Recommended: 4</td></tr><tr><td style="width:50%;">SOLID TOP/BOTTOM LAYERS</td><td style="width:50%;">Recommended: 5</td></tr><tr><td style="width:50%;">EXTRUSION WIDTH</td><td style="width:50%;">Forced 0.4mm</td></tr></tbody></table></figure><p><br><strong>Tips &amp; Hints:</strong></p><ul><li>Set 90° infill direction for both legs;</li><li>Set 0° infill direction for handle inserts;</li><li>All other parts - default 45°; </li><li>You might consider using outer brim 2.5-5mm, distance 0.1mm for all accent [a] parts if printing with ASA or other filaments with tendency to warp. </li><li>A wall count of 4 is an <strong>absolute must</strong> to ensure the structural integrity of the parts. There is no need to go over the top with this. <strong>4 walls are fine for this particular build.</strong></li></ul><h4>File naming for printed parts:</h4><p>The parts use this naming convention:</p><ul><li><strong>PRIMARY COLOR</strong> — These files will have nothing at the start of the filename.</li><li><strong>ACCENT COLOR</strong> — Files have “[a]” to the front of any STL file that is intended to be printed with accent color.</li><li><strong>COUNT OF PARTS </strong>— Files have “x1” to “x2” at the end of any STL file. The number represents the count of identical parts to be printed.</li></ul><figure class="table" style="width:100%;"><table style="background-color:#65C90018;border-color:#65C90018;border-style:solid;"><tbody><tr><td style="padding:20px;width:100%;"><h3>HOW TO SUPPORT THE PROJECT</h3></td></tr></tbody></table></figure><ul><li>If you like this project <strong>like</strong> and <strong>download</strong> model files.<br> </li><li>If you find this useful and want to see more from Iconic FAB first - <strong>consider following</strong>.<br> </li><li><a target="_blank" href="https://buy.stripe.com/8wM9Cr97q24Cb8QcMM" rel="nofollow noopener"><strong>If you really like this and find it very useful support project  with ANY amount of your choice.</strong></a></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000421582/design/5282e21f-e1b0-4590-a732-d1655b719758.png"></figure><figure class="table" style="width:100%;"><table style="background-color:#F5F5F5;border-color:#808080;border-style:solid;"><tbody><tr><td style="padding:20px;width:100%;"><h3><strong>CHANGELOG</strong></h3></td></tr></tbody></table></figure><figure class="table" style="width:100%;"><table><thead><tr><th style="width:20%;"><strong>Date</strong></th><th style="width:75%;"><strong>Change</strong></th></tr></thead><tbody><tr><td style="width:20%;">24.04.2024</td><td style="width:75%;">R1.1 — <strong>Major</strong> changes for printed parts; optimised BOM.</td></tr><tr><td style="width:20%;">08.04.2024</td><td style="width:75%;">Initial version (R1.0)</td></tr></tbody></table></figure>

The RIG (R1.1) — DIY stand for testing electronics

Need to print Work

JamesThePrinter

<p>Twisted triangle stand for a 3x3 cube</p>

Rubik's Cube Stand

Need to print B

user_1264226612

<p><span style="background-color:rgb(255,255,255);color:rgb(0,14,26);font-size:14px;">If you want to store many earrings but also look at them when you choose what you wear.</span><br><span style="background-color:rgb(255,255,255);color:rgb(0,14,26);font-size:14px;">You can take the cards out and put them back when you're done.</span></p>

Earring holder storage

Need to print Wendy

dp makes

<p>A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.</p><p>&nbsp;</p><p>I think my idea of creating a "<strong>Whistle Pan flute</strong>" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.</p><p>&nbsp;</p><p>This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.</p><p>&nbsp;</p><p><strong>•Print settings•</strong></p><p>&nbsp;</p><p>Supports: No<br>Resolution: 0.2mm <br>Infill: 15%</p><p>&nbsp;</p><h4>Important notice:</h4><p>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener"><strong>paypal, </strong></a>that will be greatly appreciated.</p>

Whistle Pan flute

Need to print Sound

Bambu Lab

<p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">A1 mini test model - Swatch Display Board by Bambu Lab</span></p>

Swatch Display Board by Bambu Lab

Printer add-ons

无明业火_BLAZERS

<p>    This is a cartoon-style toy shooter, without firing capability and cannot be modified, making it safe to play. It features intricate design that allows for functions such as blowback shell ejecting action, locking the slide back on an empty magazine, trigger-hammer interaction, and a safety mechanism.</p><p>这是一款卡通版的手枪玩具，没有发射功能，也无法改装，可以安全玩耍。通过精巧的设计实现反吹抛壳、空仓挂机、击锤联动、保险的功能。</p><p><strong>Filament：</strong>PLA Basic is recommended especially in moving parts</p><p>耗材：推荐使用PLA Basic耗材，尤其是运动部件</p><p><strong>Hardware Kit</strong>：</p><p>   1.pivot pin</p><p>      D2xL14                1</p><p>      D2xL18                9</p><p>      D2xL25                1</p><p>   2.compression spring：</p><p>      0.3x3xL10           2</p><p>      0.3x6xL80           1</p><p>      0.5x5xL25           1</p><p>      0.7x12xL70         1</p><p>   3.torsion spring:</p><p>      0.4x4(120°，cylindernumber 6）   1</p><p>      1x5(120°，cylindernumber 3）      1</p><p>   4.screw</p><p>      M5x12(thin cap)         3</p><p>you can also buy the hardware kits from：</p><p>    https://item.taobao.com/item.htm?spm=a213gs.success.0.0.72334831uVSCTY&id=746688606932</p><p><strong>Video Tutorial：</strong></p><p><strong>   1.You Tube:</strong></p><figure class="media"><div data-oembed-url="https://youtu.be/uZ-ClomC5pU"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/uZ-ClomC5pU" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p>      <strong>2.Bilibili:</strong></p><p>      https://b23.tv/TfENGK3</p><p><strong>Thanks and enjoy it !</strong></p>