Betdegaz

Pathfinder.Ant

多功能机械臂（Multifunctional Robotic Arm）：1.此次模型为桌面台灯，适用于办公桌，书桌以及当作摆件或者氛围灯（This model is a desktop desk lamp, suitable for office desks, desks, and as a decorative or ambient light.）；2.模型直径约10cm左右，延伸高度约30cm，不包括扩展灯罩部分（The model has a diameter of about 10cm and an extension height of about 30cm, excluding the extended lampshade.）;3.模型适配拓竹的夜灯套件（Model adapted night light kit for LED Lamp Kit 001）;4.涉及多种尺寸螺丝，包括M2，M3，M4，尽量使用内六角螺丝，视觉观感会更好（Involving multiple sizes of screws, including M2, M3, M4）;5.小风扇专篇详见（For detailed information on the small fan section, please refer to）：<a target="_blank" href="https://makerworld.com/zh/models/485133#profileId-397570" rel="nofollow noopener">https://makerworld.com/zh/models/485133#profileId-397570</a>

Multifunctional Robotic Arm - Desktop Lamp Edition

Lampes

michelem

Welcome to our cozy Midcentury Modern Birdhouse!&nbsp;It&#39;s not just a home for birds – it&#39;s a stylish retreat full of cool features like a Wifi enabled camera for birdwatching and more!&nbsp;Around the house, you&#39;ll find cool stuff like a modern textured panel, tiny cacti, a cute wooden-effect wall, a pergola for shade and a handy tray for seeds or plants. There&#39;s even a pop of color with a fun angular piece!&nbsp;Of course, there&#39;s a 35mm entrance and a little perch for our feathered friends.&nbsp;But the coolest part? The roof has a big opening covered by a magnetic box that looks like a mini terrace. It&#39;s not just for looks – you can put a plant in it with the &#34;Terrace Box&#34; component or add a WiFi camera with the &#34;Blink Support&#34; part to see what the birds are up to!&nbsp;It comes with mounts for walls or poles, so you can place it wherever you like.&nbsp;Printing it is easy but takes a bit of time. Since it&#39;s for outdoors, use tough materials like PETG, ABS, or ASA is recommended. PLA might fade or warp in the sun.&nbsp;You&#39;ll need screws, bolts, inserts, and magnets – check the list below for everything you need!&nbsp;Assembling it is quite intuitive, but I have attached the complete instructions.&nbsp;To add the Wifi camera you will need a Blink device (works with Blink Outdoor 3 or 4). You could need also the Sync Module or an Alexa device to connect the camera to.&nbsp;I personally used these:&nbsp;<a target="_blank" href="https://www.amazon.it/dp/B086DKRWCH?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Blink Outdoor Camera</a> <a target="_blank" href="https://www.amazon.it/dp/B084RPZGR2?psc=1&amp;ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">Blink Sync Module</a>&nbsp;NOTE:It&#39;s recommended not to install the birdhouse in direct sunlight, especially if equipped with the WiFi camera. Best place would be under a tree or similar.&nbsp;Dimensions&nbsp;The base is 25cm x 20cm. The house with terrace is tall about 19cm max.&nbsp;Unfortunately, I&#39;ve just finished and mounted the first one, so I don&#39;t have any videos of our little friends to show you yet. However, here&#39;s a peek inside with the camera:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000468694/design/2024-05-19_c9dc902e65eab.jpeg"></figure>Get ready to enjoy building your birdhouse and making new feathered friends!

Modern Midcentury Birdhouse - Wifi Camera enabled

Animaux

3Dgifts.be

Mario on yoshi lightbox

Nintendo

Maker1O1

Originally published by: McGybeer and licenced under CC BY-NC-SAPainted for AMS 4 colors<ol><li>Body</li><li>Eyes pupil</li><li>Eyes whites</li><li>Body accents </li></ol>

Articulated Lizard Gecko AMS or Single color, Print in Place

Flex

MartMan

Behold the elegance of a 3D printed Voronoi butterfly, a marvel of artistry and technology. Inspired by the intricate patterns found in nature, this delicate creation showcases the beauty of mathematics and organic form. Crafted with precision layer by layer, the butterfly's wings are adorned with intricate Voronoi tessellations, creating a mesmerizing interplay of light and shadow. From its gracefully curved antennae to its delicate wingtips, every detail is a testament to the fusion of art and innovation. Whether displayed as a standalone piece or incorporated into a larger art installation, the Voronoi butterfly captivates with its ethereal charm and timeless allure. Easily assemble this for a little bit a flair too plants. Or around the house. Best printed flat and with PLA.

Voroni Butterfly

Art et Sculpture

Litolunar

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/850459/2024-04-09_e1a95f5bf1581.png"></figure>&nbsp;Dive into the absurd and existential world of Flork with this original sock puppet-inspired keychain design. Created with the charm and humor that have made Flork famous since its debut in 2016 through MS-Paint, this accessory is perfect for fans of the webcomic and its unique style. Carry a piece of Flork of Cows&#39; irreverent humor with you and make your daily life a bit more absurd and entertaining. Whether as a gift or a personal treat, this keychain is a unique way to showcase your love for the Flork universe

Flork KeyChain

Porte clés

Zer0 Effort Workshop

3D print your own Easter Bunny Costume figure made from 500% scale replica of popular toy bricks. Basket, bunny and egg accessories are not in this print profile and can be <a target="_blank" href="https://makerworld.com/en/models/373716#profileId-273742" rel="nofollow noopener">found here</a>.<h3>Printing Guide</h3>An AMS is required to print this figure, and two are recommended to achieve the multicolor torso part. It is also recommended to use the print profile I have provided to print this model. I can't guarantee that you will achieve the same success I have, but after several test prints and trial and error, I know this to work. I also recommend printing on a <a target="_blank" href="https://www.amazon.com/gp/product/B0BY8RZBZ6" rel="nofollow noopener">smooth surface PEI plate</a> so your pieces are not textured.<h4>Filament</h4>The print profile is separated by plate for efficiency with printing time and material. You can use whatever filament you have on hand, but I used:<ul><li>eSun PLA+ White</li><li>Sunlu Meta PLA Black</li><li>Sunlu PLA Sakura Pink</li><li>Sunlu PLA Lemon Yellow</li><li>Sunlu PLA Pure Yellow</li><li>Sunlu PLA Taro Purple</li><li>PolyLite PLA Turquoise</li><li>Bambu Lab PLA Basic Gray</li></ul><h4>Print Settings</h4>The print profile is set up to print two wall loops and 10% infill on Gyroid, however you can tweak to your liking.<h4>Supports</h4>Again, I recommend the settings I have in the Print Profile. I have added manual supports to the overhangs that are critical. Some may need needle nose pliers to be removed.<h3>Assembly Guide</h3><ul><li>The head piece is printed in two halves to save on time and material. The pegs can be friction-fit into one half, and then both halves can be glued together with <a target="_blank" href="https://www.amazon.com/gp/product/B0166FFCHS" rel="nofollow noopener">CA glue</a> (superglue).</li><li>The hands fit into the arms and stay with friction.</li><li>The arms effortlessly fit into the torso and also stay with friction.</li><li>The legs may need some force to fit onto the hip piece.</li><li>The hips have a tight fit into the torso, but I assure you they will fit and stay together.</li></ul>Happy Printing and Enjoy!

Easter Bunny 5:1 Scale Custom Brick Figure

Lego

ruimach

A more conventional knife, but oozing with style.&nbsp;Requires supports when printing.&nbsp;To assemble, you'll need a 3mm screw and nut with 12mm length.

Flip Blade "Raptor"

Réplique d'armes

JabHook

Here is a custom personalized keychain system that I have created. This includes all of the letters of the alphabet as well as the digits from 0-9. They all can be customized using the keychain bodies that will adapt from 1 to 12 characters.&nbsp;the characters slide onto the base.  put a little glue after the last character and press the end cap into that super glue to provide the lock&nbsp;

Custom personalized keychain

Divers

DRedFox

I love working on the apple display studio and the Mac mini, however positioning the mini in front does not work, neither at the side, or at the back with a printed stand (it works, but when I move the display I accidentally make it fall). Therefore I decided to build my own base support for it. This model does not require glue, however keep an eye on the tight threshold for your machine. I’ll upload the 0.1mm for P Series and a 0.2 for A Series. To assemble, just follow the pictures, always taking your time to put the pieces, do not force any cables, there is plenty space for them. NOTE: Cable has a tight fit as well, if this concerns you, consider finding a 35cm for a great fit without any compromises. I have had any so far. Cable: <a target="_blank" href="https://www.amazon.de/-/en/dp/B0C48JDLX1?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/-/en/dp/B0C48JDLX1?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>USB-C Adapters: https://www.amazon.de/-/en/dp/B0CG9316MN?psc=1&ref=ppx_yo2ov_dt_b_product_details

Apple Display For Mac  Mini M2 V1

informatiques

JamesThePrinter

This set is a great statement piece! Although not intended for actual use, they are sized properly to meet standards for an M64 nut and M64x150 bolt (ISO4032 &amp; ISO4762 respectively). I have also included the proper allen key (46mm) needed to install the bolt. The allen key has 3 main components, along with 2 pins to hold everything together:<ul><li>Section 1 - Tool End</li><li>Section 2 - Middle Piece</li><li>Section 3 - Ball End</li><li>Pin - Print twice</li></ul>Please see the assembly instructions below.&nbsp;Print SettingsAll pieces print fine without supports or any special settings. For best print results, print all pieces in the orientation as they come. Although not required, I reduced infill in most areas. However, I used a higher infill percentage below all top surfaces.&nbsp;Allen Key Assembly<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000216454/design/2024-03-02_xudrx1s15gg5.png"></figure>&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filament was used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li></ul>

Giant Nut & Bolt

Outils

ProfessorBoots

Hello this is a fun 3D Printed RC project that&#39;s a great way to get hands on experience with standard DIY development electronics.&nbsp;This model specifically is an updated/improved version of the MiniSkidi V2.0 Model. Updates include tracks, quick swap attachment plate, PCB now has mounted 16340 battery holders and a fuse for a much more user friendly experience.&nbsp;I&#39;ll link the video I made going into depth on the upgrades below as well as a link to my website where you can pick up an electronics kit that can be combined with your own 3D Printed parts if you&#39;d like to support the development of these little DIY RC projects.&nbsp;RC Skid Steer Electronics Kit: <a target="_blank" href="https://professorboots.com/products/rc-skidsteer-kit-v3-0" rel="nofollow noopener">https://professorboots.com/products/rc-skidsteer-kit-v3-0</a>&nbsp;If you&#39;re in an area that&#39;s unable to receive kits consider becoming a ProfessorBoots Workshop Member which will unlock courses to take you step by step through sourcing parts and uploading the code.ProfessorBoots Workshop Pass: <a target="_blank" href="https://professorboots.com/products/professorboots-workshop-pass" rel="nofollow noopener">https://professorboots.com/products/professorboots-workshop-pass</a>&nbsp;How To Build: <a target="_blank" href="https://professorboots.com/a/members" rel="nofollow noopener">https://professorboots.com/a/members/</a>&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Lo-3M9GaUIs?si=JqwjnujVsZZQUi6g"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Lo-3M9GaUIs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;&nbsp;

3D Printed RC SkidSteer V3.0

Véhicules

Shadow1337

Each house has two versions:<ul><li>Thin version 0-0.8mm first color, 0.8-1.6mm second color.<ul><li>about 20 minutes and 14 grams on P1P</li></ul></li><li>Thick version 0-1.2mm first color, 1.2-2.6mm second color<ul><li>about 25 minutes and 20 grams on P1P</li></ul></li></ul>I recommend printing bit slower and with 100% infill. If you don't have AMS you can just pause the print and change filament manually.Enjoy!

Harry Potter Houses Logos - Easy Multicolor Print

Logos

海洋

Goku 悟空 七龙珠 孙悟空 dragon Dragon Ball

Pokemon

3DP RNS

[3DP RNS] Headless V1.0 (3D Printed Robot)<ul><li>Series : 4 Legs / Animaloid Type [<a target="_blank" href="https://youtube.com/shorts/7H5wkBNzwhY?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/7H5wkBNzwhY"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Cubrick &amp; Cube Case V1.0 (3D Printed Robot)<ul><li>Series : 4 Legs / 4-Legged Spider Type</li><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-cubrick-100906643?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Cubrick &amp; Cube Case V1.0 Download [Patreon]</a></li><li>Cubrick &amp; Cube Case V1.0 can be obtained through Patreon (Hero) membership.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/q0NL_I6283k"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Optronic V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-optronic-103196500?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_fan&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Optronic V1.0 Download [Patreon]</a></li><li>Optronic V1.0 can be obtained through Patreon (Hero) membership.</li><li>This robot is equipped with a camera on the front of its head, which has various features such as infrared and thermal imaging.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/8-6pLwAEBuQ"></oembed></figure>

[3DP RNS] Headless_V1.0

Robot

3dEd

Inspired by the Halsam American Logs that I played with as a child; I have engineered a complete set of logs for 3D printing. Notable improvements are windows and doors, a ridge cap, a realistic looking chimney and a tighter fit for more stable buildings.&nbsp;There are three curated buildings, one, the Small Cabin, can be printed on the A1 mini. The logs are organized in the print profiles by type, with a menu of the included parts. Every configuration of the logs is available, hopefully making this a complete set.The doors use a piece of filament for the hinge pin.&nbsp;For colors I have used PolyTerra earth brown, army red, and forest green which are the same as Bambu Lab PLA Matte dark brown, dark red, and grass green. The white parts are printed with PLA pro, although any bright white PLA should work just fine.&nbsp;The windows are constructed out of three pieces which press fit together. The door frames use two pieces. If one desires a more secure fit, a drop of glue can be added.&nbsp;The chimneys are the only parts that use an AMS. For those so inspired, the color changes occur at layer changes, so one could change filaments at the right time to achieve the same thing without the use of an AMS. I have used Overture rock filament for the stone in the chimney although any color in the gray to tan range works just fine. They also look okay printing the chimney entirely in a light brown.

Log Cabin Building Playset

Architecture

Vixvvo 3D

commercial licenses will be accessible through my Patreon page, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated!&nbsp;This is a V2 version of the previous one I've made, this look is way over modern and smooth finish! “I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features three separate drawers for organization! Attach it with double-sided tape or opt for drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!” <ul><li>Took this idea from <a target="_blank" href="https://www.printables.com/@godsci" rel="nofollow noopener">Godard Scientific</a>.</li><li>Around 500g of filament</li><li>12 Hour of print time</li><li>needs <a target="_blank" href="https://www.amazon.ca/uxcell-Screws-Phillips-Carbon-Tapping/dp/B09B385SFS/ref=sr_1_8?dib=eyJ2IjoiMSJ9.3XW9GKS24tRc1l0zzCYIaDV_JpwTjt1yyVTipehZhP_09z7Kqgsl4oFVeEVEHPo4FCwFetbodOyEBIQIJwt2k9aJRGSwSKCYmFiBS4IpznPE5CCs6on0nJUxpOMH_GJSkh5q3agzswdsSxrtf3oyMsTVDX3dV9Tgz0x-hfpoO_IpjMS8Uoomz9uCN1muf3RiZqNcjGYMd8Hi4ZCI5sQz-IODglrSst2MInJAshQ88QCc99hJqN2X6ZCLBld0p8HNnfJp8Of8ATmcldB1l-79JkGAQFM-6mYJH74tGxEnRXg.OBCFM2l7fP2IISSKCx1KfzWYzsLorDqZ5ts2zwnfyks&dib_tag=se&hvadid=684854298656&hvdev=c&hvlocphy=9000121&hvnetw=g&hvqmt=e&hvrand=15885152324473862792&hvtargid=kwd-317894824318&hydadcr=11265_13489654&keywords=18mm%2Bscrews&qid=1708800713&sr=8-8&th=1" rel="nofollow noopener">M3 x 18mm</a> Screws</li></ul>&nbsp;&nbsp;

Under-Desk Drawer V2

Bureau

Whopper Printing

FULLY Print-in-Place, NO support required. The trailers are modular and can be swapped! More trailers to come!&nbsp;The trailers easily snap into the truck and can be easily swapped. If you enjoy this model, you'll love my other print-in-place models, just check my profile!More trailers to come! Join my Printables Club or <a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon </a>below. More paid models available on <a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">my website.</a> Make design suggestions on <a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">my Discord!</a>If you would like to support me, consider these options:Join my Printables Club or my <a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a>!Social Links:<ul><li><a target="_blank" href="https://whopperprinting.com/" rel="nofollow noopener">WhopperPrinting.com</a></li><li><a target="_blank" href="https://patreon.com/whopperprinting" rel="nofollow noopener">Patreon</a></li><li><a target="_blank" href="https://whopperprinting.Etsy.com" rel="nofollow noopener">Etsy</a></li><li><a target="_blank" href="https://instagram.com/whopperprinting" rel="nofollow noopener">Instagram</a></li><li><a target="_blank" href="https://discord.gg/UfyQhUfn4N" rel="nofollow noopener">Discord</a></li><li><a target="_blank" href="https://www.tiktok.com/@whopperprinting" rel="nofollow noopener">TikTok</a></li></ul>

Print-in-Place 18 Wheeler (With Modular Trailers)

Jouets

commercial licenses will be accessible through my Patreon page Including every other model designed, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">Vixvvo's Patreon</a> is greatly appreciated!&nbsp;Clip on box, with the option of using a handle or not! it is water resistant. and have lot of storage space. Need<ul><li>4 (30mm M3 Screws) for the clips</li><li>¼ x ¾ Bolts (The head is 1/4 inch and length is 3/4 inch !) for the handle</li></ul>