Beardeddude916

dashmik

Easy print, works well, i printed from PLA. You can choose from 4 types of bookmarks.

Pokemon bookmark set

bookmarks

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

Bambu Kits

Fatalchaos25

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: white Transmission Distance: 20 black Transmission Distance: 1.5 red Transmission Distance: 20 yellow Transmission Distance: 9 Swap Instructions: Start with white At layer #6 (0.56mm) swap to black At layer #8 (0.72mm) swap to red At layer #12 (1.04mm) swap to yellow for the rest.

pokemon card charizard hoeforge

Pokemon

SavageLau

<h3>If you want commercial license, check out my bio and get it from Patreon. </h3>&nbsp;&nbsp; Hi, there are two style of sign, their have different font. I also paint it with different color on printing file section.<figure class="image image_resized" style="width:49.85%;"><img src="https://makerworld.bblmw.com/makerworld/draft/368014/2023-11-22_e729f60d23407.jpg"></figure>Style 2 might have error report, becasue the font that I use, just ignore it. It will print just fine.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/368014/2023-11-22_ff6b0a8ecb58f.png"></figure>

Bambu hub sign

Magnets

andrzeju

Flexi triceratops&nbsp;&nbsp;&nbsp;&nbsp;<a target="_blank" href="https://www.printables.com/model/15623-flexi-triceratops/comments" rel="nofollow noopener">Flexi Triceratops by AndyFuentes22 | Download free STL model | Printables.com</a>

Flexi triceratops

Flexi

IXPatch

To celebrate the 7th anniversary of Pokémon GO, I decided to make a little PokéStop spinner keychain :) It prints in place with no supports or assembly required.

PokéStop Spinner Keychain - Pokémon GO (print-in-place)

Keychain's

Adam L

Changelog:<ul><li>4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added note on preferring Classic to Arachne in Notes.</li><li>4/23/23: I realized the PA values somehow got deleted from some of my TPU profiles. I just uploaded fixed ones. I've also included a challenging model that I tuned these TPUs specifically on, a low-poly Evee, because it reveals many defects specific to TPU. If you see the Evee model in the 3MF, you can know that the profile has been verified/fixed!</li><li>6/22/23: Updated my profile for NinjaTek Cheetah TPU with a better PA value. Please use this improved profile instead. If you downloaded an earlier one, replace with the current one.</li></ul><h4> </h4><h4>What this is:</h4>This is a collection of all of my TPU filament profiles for all filaments I've used of this type. TPU and flexible filaments are particularly hard to tune, and I spent extra effort getting these profiles just right by printing lots of test models to deal with the stringing. Note that bridging in particular is not great with most TPU and may require additional print settings tuning for specific needs. These TPU profiles are tuned to provide good detailed prints with complex overhangs and small bridges, but larger bridges are always a challenge with TPU. I will update the collection as I tune new filament brands and colors. They are generally tuned for flow rate, pressure advance, and temperature and volumetric flow limits and overrides. They're a good working starting point for anyone struggling with a filament. I've also tuned other types of filaments (see <a href="https://www.printables.com/@AdamL/models" rel="nofollow">my models here</a>), and you should find, by category:<ul><li><a href="https://www.printables.com/model/455802-petg-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">PETG</a></li><li><a href="https://www.printables.com/model/457284-panylon-tuned-x1c-print-profiles-for-bambuorca-sli" rel="nofollow">Nylon/PA and PACF variants</a></li><li><a href="https://www.printables.com/model/457321-pc-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">Polycarbonate & Polycarbonate-CF</a></li><li><a href="https://www.printables.com/model/457248-pla-tuned-x1c-print-profiles-for-bambuorca-slicer" rel="nofollow">PLA / PLA + / Silk PLA</a></li><li><a href="https://www.printables.com/model/457271-absasa-tuned-x1c-print-profiles-for-bambuorca-slic" rel="nofollow">ABS / ASA</a></li></ul>CHT-Nozzle versions also available (0.4 mm , Brass)<ul><li><a href="https://www.printables.com/model/539704-chtnozzlepetg-tuned-x1c-print-profiles-for-bambuor" rel="nofollow">PETG</a></li><li><a href="https://www.printables.com/model/540552-chtnozzlepla-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">PLA</a></li><li><a href="https://www.printables.com/model/542033-chtnozzletpu-tuned-x1c-print-profiles-for-bambuorc" rel="nofollow">TPU</a></li><li><a href="https://www.printables.com/model/542058-chtnozzle-asaabs-tuned-x1c-print-profiles-for-bamb" rel="nofollow">ABS/ASA</a></li></ul><h4> </h4><h4>How to use:</h4> These 3MF files are designed for use in Orcaslicer/Bambuslicer, but will work best in Orcaslicer, because it supports using a fixed pressure-advance value in the slicer. <ul><li>Load the 3MF file for the filament of your choosing. Files are named as <Brand>__.3mf.</li><li>(optional, recommended): Save the filament and/or print presets for your own use to your user presets for future use.</li><li>Remove the calibration cube dummy object and put your desired object in.</li><li>Print! But, turn off flow calibration option in your prints! The more reliable PA value stored in the filament profile will be used instead, and you can skip the wasted startup time, too!<ul><li><img src="https://media.printables.com/media/prints/455802/rich_content/dcbf8f87-13d5-4362-a0f5-c9b1a895b70a/image.png#%7B%22uuid%22%3A%22ff02b71c-6cd6-4ebc-b38a-446080d43e9e%22%2C%22w%22%3A440%2C%22h%22%3A110%7D"> </li></ul></li><li>If you want to use these in Bambu slicer, you won't get the PA values applied automatically sadly, and you'll have to do that with a <a href="https://forum.bambulab.com/t/flow-calibration/892/15" rel="nofollow">manual GCODE in the filament's start GCODE</a>. This is really annoying to do for each filament, but it does work. However I suggest you try Orcaslicer for this reason.</li></ul>&nbsp;<h4>Important notes:</h4><ul><li>TPU is pretty sensitive to lots of variables, so these profiles may have more overrides than you are used to. Additionally, in your slicer layer height and Classic vs Arachne slicing can produce significant differences. I prefer layer heights of 0.16 or 0.2 mm and Classic slicing mode, as it seems to produce slightly better results.</li><li>These profiles are tuned on an X1C, with a hardened steel 0.4 nozzle installed, for use with a range of layer heights. If you have a different nozzle size or nozzle kind (steel/brass), these will be only starting points and you should re-tune most of the variables except maybe temperature.</li><li>Each 3MF also contains some of my own optimized settings for 0.16 mm prints, which I typically use, but these tuned filament profiles are designed/tuned to work across a variety of different print profiles.</li></ul><h4>Background:</h4>I use the <a href="https://github.com/SoftFever/OrcaSlicer" rel="nofollow">Orca Slicer </a>variant of Bambu's slicer because it offers finer-grained control over the slicing process and makes tuning and using tuned filament profiles much easier than Bambu's official slicer, which lacks good calibration routines for some of the most important variables in good printing: flow rate, pressure advance, and temperature and volumetric flow limits. This is particularly true for Bambu's Pressure Advance (<a href="https://github.com/bambulab/BambuStudio/issues/348" rel="nofollow">they incorrectly call this “flow”</a>) calibration, which forces you to run it every time and is unreliable, particularly on the popular textured PEI surface.Each of these profiles has been tuned for:&nbsp;<ul><li>Flow rate (aka extrusion multiplier)</li><li>Pressure advance (aka linear advance)</li><li>Temperature (with temp towers)</li><li>Volumetric flow limits (my settings are a little conservative based on printing the max volumetric flow rate calibration inside Orcaslicer)</li><li>Overrides (I typically try to avoid using these unless I have to)</li></ul>&nbsp;Disclaimer: These are free to use, and I do not own the OrcaSlicer calibration cube model, i'm just using it here as a convenient way to distribute the profiles.

- TPU/Flexible - Tuned X1C Print Profiles for Bambu/Orca-Slicer

vojta.suchomel

It's necessary to use transparent filament This is a print profile for a solid block of the material, achieving higher mechanical strength and transparency for transparent materials, The critical factor is 107% flow of the material, Slower speed, and a bit higher print temperature. You can use it on your own model, For example, optical lenses, Solid blocks with hollow inside, etc. You can slightly tune it by yourself, for example slower print speed 10-15mm/s, or use higher extruder temp. 260°C. For post-process, you can sand it with sandpaper, and for a totally clear look use a hot airgun, lighter, or torch.

PETG Transparent print by FDM

PETG

uhltimate

Description:Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/gTluRbJBJP0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/gTluRbJBJP0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>Impressive Range: Launch discs with precision over 8 meters.</li><li>6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Some nice add-on parts and modifications:<ul><li>Mesmerizing Discs with colorized pattern by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a></li><li>Magazine Extension - 12 Shots by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/109578#profileId-117052" rel="nofollow noopener">https://makerworld.com/en/models/109578#profileId-117052</a></li><li>Easy load handle by @madizmo <a target="_blank" href="https://makerworld.com/en/models/102564#profileId-109231" rel="nofollow noopener">https://makerworld.com/en/models/102564#profileId-109231</a></li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 for the spring !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Print Orientation for the Frame (no Support required)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-22_ca11c87353632.png"></figure>&nbsp;&nbsp;cutaway model (Assembly aid)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-18_0bc99f0ee1ade.jpg">&nbsp;

6-Shot Disc Shooter

Toys

Pip3D.

I made a flexible 3D Dragon. It's super cool, featuring 3 horns! I modelled this from a traditional Chinese costume dragon head.&nbsp;COMMERCIAL LICENSE REQUIRED - Join any of my memberships (Printables Club/Patreon) to have active license to sell physical prints&nbsp;https://www.patreon.com/pips3d/membership

Dragon

Dragons

Makerneer

I make gimbal keychains for most holidays as a fun "business card." They're great small pieces that can easily show off some of the things you can do with 3D printing.Here's the one I made for St. Patrick's Day!This prints as one single piece and as an added bonus the raised name on the side works great for embossing and stamping.I typically use the beaded metal chains for the keychain part, specifically this one <a target="_blank" href="https://amzn.to/3PDX4YD" rel="nofollow noopener">https://amzn.to/3PDX4YD</a> (affiliate link)&nbsp;&nbsp;Looking for a little more “Luck?” - Checkout my Lucky Charms Kit Card too! <a target="_blank" href="https://makerworld.com/en/models/217054#profileId-236076" rel="nofollow noopener">https://makerworld.com/en/models/217054#profileId-236076</a>&nbsp;<h3>Print Settings</h3>Rafts:Doesn't MatterSupports:NoResolution:.2mmInfill:20% or moreFilament: Any PLA   Notes:&nbsp;PLA, 205C extruder, 45C bed, no support required.Turn on cooling to help the gimbal pins not weld to the rings.&nbsp;&nbsp;Category: Keychains

St. Patty's Day 4 Leaf Clover Gimbal

St. Patrick's day

mclanesmemories

Any Cat Can Be A Tuxedo Cat - Dressed for the Wedding - Set of 3 Bookmarks&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #3 0.32 mm) swap to dark grey At layer #9 (0.80 mm) swap to white

Any Cat Can Be A Tuxedo Cat - Dressed for the Wedding - Set of 3 Bookmarks

Wedding

Glacial

<h2>Bring a touch of whimsy to your 3D printing adventures with this adorable Kirby character capturing all mischievous poops!</h2>&nbsp;Can be printed on both A1 mini and P1/X1 series printers. Available in multicolor but not needed as painting the eyes and cheeks is a small task :). This model has custom painted support for optimal quality! Can be used on both A1 mini and P1/X1 series machines! Inspiration from the waste eater model by Body3D <3 Enjoy printing and have a wonderful christmas and a happy new year!<a target="_blank" href="https://www.instagram.com/foxart.3d/" rel="nofollow noopener">https://www.instagram.com/foxart.3d/</a> <img src="https://makerworld.bblmw.com/makerworld/draft/326329/2023-12-17_6d02083ebaa02.jpg"> Remix: Seperated the feet to use a single ams and make it use less support. Made the opening wider and enlargerd the inside to use les filament. &nbsp;

Kirby Waste Eater

Parts

Frikarte3D

This 3D printable model is a Flexi Heart Keychain that has flexible points. It’s a lovely and fun accessory that you can attach to your keys, bag, or backpack. You can twist and bend it in different ways to show your mood or style.This model is easy to print and requires no supports or infill. Just print it with a layer height of 0.2 mm and a nozzle diameter of 0.4 mm. The recommended material is PLA, but you can experiment with other filaments as well.The size of the model is 53 x 50 x 5.5 mm and it prints in about 20 minutes at 60 mm/s. This Flexi Heart Keychain is a great way to personalize your belongings and make them more fun. It will make you smile every time you use it or look at it. Download it today and take your heart wherever you go!If you like this model, please leave a comment and a rating. Thank you! 😊ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.To sell them legally, message me so we can work out a deal.Hope you like it! Any advice, or recommendation is welcome! Happy Printing!I would be very grateful if you print it and put it on social networks to tag me at <a href="https://www.instagram.com/frikarte3d/" rel="nofollow">@Frikarte3D</a>If you tag me and have a private account or I don’t follow you, please send me a message so I can see your post and appreciate your work.

Flexi Heart Keychain

Valentines 

VRsculpts

A crochet/knitted version of Ralphie in his classic bunny costume! Print profiles included to print as small keychain or ornament, or a larger 5 inch figurine (26.5 hrs print + 286g of filament).&nbsp;Print profiles implement a pause once it has passed his feet & tail for filament swap - if using 1 AMS you'll need to swap the white and red (dark pink) for yellow and skin tone. If you have 2 or more AMS, you might want to use Bambu Slicer and paint his glasses brown and could even do the zipper in a shiny silver silk PLA! All my files are easy to color in bambu slicer - be sure to select the fill bucket and turn off edge detection and all the main parts can be recolored.&nbsp;Join my Patreon if you would like to sell physical copies of my designs, your support is appreciated and motivates me to create more cool stuff to share! https://www.patreon.com/VRsculpts

Crochet Ralphie (keychain/ornament or 5 inch figurine)

Christmas 

Infinity 3D Prints

A CUTE CROC CHARM . PRINT THEM IN ANY COLOR !!!&nbsp;Please hit that like button!!<img src="https://makerworld.bblmw.com/makerworld/draft/294292/2023-12-21_117ebcfaa5ffc8.gif"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/294292/2023-12-21_fbb2bb3507c34.gif"><figcaption>Peeps 🐥 rule the world 🌍 </figcaption></figure>

PEEPS CROC CHARM 

croc charms

RoB.G

Easter egg box

Easter

Madness3D

Pumpkin / Jack o lantern shaped Flower pot 6cm opening.&nbsp;Can also be used as small candy bowls.&nbsp;&nbsp;

Halloween bowl - Flower pot

Halloween

Slowpoke's Workshop

wife loves butterflies so i make a few designs

Flower Butterfly

spring

Treyceff

This is a joke, but was a pretty popular print i put together a while back, so I figured I would upload it here.

Turdeau Aka Poodeau

Jokes

BODY3D

Fidget Flower

Decorations

user_1986533771

AI produced photo of a monarch butterfly, processed with HueForge software, and printed on a Bambu Lab X1C printer using 100% infill with a layer height of 0.08mm and a base layer of 0.16mm. Insert filament color changes in Bambu Studio according to the swap instructions below.&nbsp;Filaments Used: Sunlu Black Transmission Distance: 0.3 Inland Silver Transmission Distance: 2.5 Overture White Transmission Distance: 6&nbsp;Swap Instructions: Black until layer #5 at 0.48mm Silver until layer #10 at 0.88mm White for the rest.