Baseball51898

lindnjoe

4th of July Decor for your planters &amp; garden. Many uses and multiple designs. Decorate the food table for your 4th of July party.Scale to different sizes to suit your needs.

4th of July Garden Stakes

holiday decorations

The perfect minimalist watering can for any PET-bottle.Print with tree-support and a layer height of 0.12mm.It should be considered to be printed in a UV-stable and watertight material. Mine is printed in Polymaker&#39;s PolyLite PETG and not completely tight. It slightly leaks by the seam, but that&#39;s most likely a print parameter issue.

PET-Bottle Watering Cap

garden

R C 3D

SUMMARY: This is a tool designed specifically for prying back the gasket on a harvest right freeze dryer. By doing this before closing the door, I can get a good seal 100% of the time. Just pry the gasket around the entire seal, and close the door. It will be a little tight, but once it's closed you should have a good seal.&nbsp;PRINTING: I used the following settings in my print profile. Many aren't important, but I try to make the quality and speed in my print profiles to be as good and fast as I can.<ul><li>Only one wall on top surfaces: Not applied</li><li>4 Walls for strength</li><li>Hilbert curve top and bottom surface pattern for a nice grip</li><li>10% gyroid infill for a fast, but sturdy print</li><li>1.6mm bottom shell thickness (I did this specifically for silk filaments and a few others which like to split when the bottom thickness is low)</li></ul>

Harvest Right Freeze Dryer Gasket Tool

mawmaw

flex0011

A simplified dog poop bag clip to attach to the leash for those long walks where there are no rubbish bins. You can stack multiple bags if you need on one clip.

Simplified Dog Poop Clip

pets

for me

im.jackharvest

To see more video game themed items I've made, <a target="_blank" href="https://makerworld.com/en/u/491970848/collections/461438" rel="nofollow noopener">check out my collection</a>.-----------------------------------&nbsp;It's a work of love! Just slip one of the openings over the vent tab, and turn (while your hand is out of the way of course).&nbsp;This helps save your kitchen cabinetry from getting hosed to death from all the steam . Likewise, if you have this sitting on an island, and you want to avoid hitting hanging lights that might be directly overhead, this is still useful.&nbsp;------------Some Stats:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/445604/2024-01-05_9410ecf14d46.png"></figure>The flushed filament is nearly the amount of the model. Luckily the model isn't that big, but still, I'd recommend printing something functional you were planning on printing anyway (and select to flush into the object, by right clicking your other object while in prepare mode.)<img src="https://makerworld.bblmw.com/makerworld/draft/445604/2024-01-05_7ed3c5f9cf957.png">…something in the 60+ mm size range, will cut your waste in half: <figure class="image image_resized" style="width:70.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/445604/2024-01-05_b7e60410b010b8.png"></figure>&nbsp;This print moves your flushing volumes to 0.60 (vs Bambu's 1.00 flush ratio) which should be enough to barely not have it scream at you for being too aggressive in your color changes.&nbsp;Bringing it down to 0.25 will result in some bleed, since these colors are pretty much THE worst bleed colors of all.<figure class="image image_resized" style="width:60.75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/445604/2024-01-05_748013e1327d38.jpg"></figure>It's not a crazy amount of bleed, but its there (the black eyes trail into the hat slightly, and the tongue bleedes into the pink layer lines slightly). I didn't test anything inbetween 0.25 and 0.60. Like bambu, I wanted you to have success, so I'm erring on the side of caution with 0.60. Should you decide to dive down to 0.25, the waste gets cut in half again down to an awesome 4g:<figure class="image image_resized" style="width:67.74%;"><img src="https://makerworld.bblmw.com/makerworld/draft/445604/2024-01-05_c8552ba060f5b8.png"></figure>So, try something between 0.25 and 0.6, and if it doesn't compromise anything, come on back and upload a profile! :D&nbsp;Happy printing!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/445604/2024-01-05_d31238910450d.png"></figure>&nbsp;

Kirby Food Ninja Steam Redirector (Pressure Cooker Kitchen Cupboard Saver)

home goods

mattschmitt21

These are US-style replacement POV hats and buttons for VKB hardware. These were modeled on an MCG Pro flight stick but should work with other VKB hardware like the STECS throttle or anything that uses similar hats. These WILL NOT work on the Gladiator sticks.&nbsp;The designs are from the F-16 style stick and are made by eye so don't expect exacting detail to the real world version.&nbsp;There are 6 options:-Gray F-16 trim hat for the “Master Mode” hat on the MCG-Black castle hat for the “MANVR” center hat. There are two versions, old and new, based on various versions of F-16 sticks.-Gray two-way countermeasures hat. There are tall and short versions. The tall one looks more authentic and works well on the thumb “RESET” hat. The hats are all 4 way, but because of the button's width, you'll lose the right direction. The short version works well on the index finger “DC” hat if you prefer to retain a 4-way hat there similar to the Winwing F-16 stick.-Finally, there is a gray button that turns a 4-way hat into just a button. This works well on either the “RESET” or “DC” hats, the DC position being the most authentic to the F-16.&nbsp;The hats are all two-piece construction to improve print quality. The shaft for the two-way countermeasure hat needs to be mounted in a certain direction, there's a small nub modeled on the part that should face forward or back. A vice or a flat metal plate to press them in will help with assembly. All the gray hats or buttons have a step inside the shaft that must go on the button shaft a certain way. They take a little force to put on the first time but be careful not to break your stick. The tolerances are tight so you may have to rescale slightly in your slicer. If the shafts don't stay in the hat tops a dab of super glue will keep things together.

VKB US Style POV Hats and Buttons

simulation 

The 3D Imagineer

Dole whip Christmas ornament and zipper pull. Makes a great Christmas ornament or zipper pull on a backpack. Great memory from Disney World, Disneyland, or even a Disney Cruise.&nbsp;You can see the whole ornament collection here: <a target="_blank" href="https://makerworld.com/en/u/1645946058/collections/125629" rel="nofollow noopener">https://makerworld.com/en/u/1645946058/collections/125629</a>&nbsp;The matching Mickey ice cream: <a target="_blank" href="https://makerworld.com/en/models/76851#profileId-81305" rel="nofollow noopener">https://makerworld.com/en/models/76851#profileId-81305</a>Mickey Waffle: <a target="_blank" href="https://makerworld.com/en/models/84047#profileId-89839" rel="nofollow noopener">https://makerworld.com/en/models/84047#profileId-89839</a>&nbsp;

Dole Whip Ornament/Zipper Pull

disney

The Crafty Maker

6 different easter egg cookie cutters.No supports needed to print. Can be scaled down or up.&nbsp;ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a href="https://patreon.com/TheCraftyMaker" rel="nofollow">The Crafty Seller Patreon</a> subscription.

Easter Egg Cookie Cutters

Cookie Cutters

补补觉去

原设计完美复现了拨轮密码锁的解构，但3位数的密码强度太弱，我重新修改了5位数的密码锁，密码从216个组合升级到7776，大大增加了密码破解难度。模型缩小到70%和80%仍然具有良好的性能，低于50%结构强度不够。安装和原理请参考原设计作者。还设计了6-9位数的密码锁，供娱乐。&nbsp;The original design is great, I love it. But the original design of 3 digits, I think the strength is not enough, I remixed a 5 digit lock.From 216 possible combinations to 7776 possible combinations.70% and 80% still have good performance, less than 50% may not be effective due to insufficient strength of the material.It is recommended not to use PETG when printing at a ratio of 70% or lower, and to use PLA to ensure better rigidity.Please refer to the original design author for installation and principle.&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/553644/rich_content/28246743-94eb-4f51-9d1d-11e9abc6bfe1/099fd47a.png"></figure>At the request of a friend, I recreated 6-9 digits Combination Padlock,further increases the complexity of the password.

五位数密码锁Five Digits Combination Padlock（Recreated 6-9 Digits）更新6-9位数。

geocache

Kardes.Design

This elegant and minimalist jewelry box is perfect for storing and displaying your favorite pieces. Its sleek design features subtle multi-colored accents that add a touch of playfulness to its modern aesthetic, while also paying homage to the rich cultural heritage of the Aztec civilization. Whether you&#39;re treating yourself or someone special, this box is a timeless and stylish choice.&nbsp;Types:Large: Approximately 200x105 mm. printable on the X1/P1/A1 series.Smaller: Approximately 175x90 mm. Printable on the A1 Mini.Divided/Undivided. (A1 mini divided version is slightly different)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000111461/design/2023-12-28_e335d214570da.png">&nbsp;Non AMS Multi part version coming soon.&nbsp;Instructions:Please use the provided print profiles.Only the lid requires support.If you choose to change anything please do so without changing the support settings.I tested all support setting and found that using rectilinear interlaced top support interface allows the support to come off effortlessly.&nbsp;Colors used:<a target="_blank" href="http://shrsl.com/4k3am" rel="nofollow noopener">Bambu Lab Purple Silk</a><a target="_blank" href="http://shrsl.com/4k3aj" rel="nofollow noopener">Bambu Lab Pink Silk</a><a target="_blank" href="https://shrsl.com/4k3a6" rel="nofollow noopener">Bambu Lab Gold Silk</a><a target="_blank" href="http://shrsl.com/4k3ai" rel="nofollow noopener">Bambu Lab White Silk</a><a target="_blank" href="https://shrsl.com/4k36h" rel="nofollow noopener">Bambu Lab Onyx Black Sparkle</a><a target="_blank" href="https://shrsl.com/4k35k" rel="nofollow noopener">Bambu Lab Royal Purple Sparkle</a>Bambu Lab Gold Sparkle ( Limited edition holiday bundle)Extra feature:&nbsp;This lid design that is perfectly suited for an epoxy resin pour, allowing you to add a touch of luxury and personalization to your box. As shown in the image below, this added feature can enhance the overall aesthetic and quality of the box, making it a truly one-of-a-kind piece.You can add glitter or a different color to the lid to enhance the look.I will release more resin pour ready models soon.&nbsp;If you choose to add an epoxy resin pour to your jewelry box, please be sure to follow all safety procedures and precautions. Working with resin can be hazardous if not done properly, so be sure to wear protective gear, work in a well-ventilated area, and follow the manufacturer&#39;s instructions carefully. Safety should always be your top priority when undertaking any DIY project, so take the necessary steps to protect yourself and others.&nbsp;Commercial use license: <a target="_blank" href="https://www.patreon.com/user?u=103482126" rel="nofollow noopener">Patreon</a>&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>&nbsp;<figure class="image image_resized" style="width: 76.7%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000111461/design/2023-12-28_45bd7604824e2.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;

The Aztec Treasure Jewelry Box

jeelry

Tazinator

This is a weapon safe flag I created for 338 Lapua firearms for range days. Its not a good idea to leave weapons unattended but on large range days with multiple people firing multiple weapons, its a nice way of signaling to people that a weapon is not chambered and rendered safe to avoid confusion and lower risk. This flag can be placed in the bolt assembly and will stick out visibly noticable if of course printed in a bright color. I typically go with red/white but you can use your own preference.

338 Lapua Weapon Safe Flag

guns

NotJoel

Magic the gathering deck box. holds roughly 80-100 cards depending on whether they are sleeved or not. Use a single rubber band to keep the sliding mechanism closed on the lid. PLEASE DO NOT PRINT LID WITH FACE DOWN. I INCLUDED THE REQ'D PRINT ORIENTATION.

Magic the gathering deck box 

3DPrintCraft

I created this maze using a website linked from the original authors website. I imported the code into OpenSCAD and rendered the model and after imported into Fusion 360 to give it a custom look. This little gold maze box is a ideal gift box, leave a coupon, voucher, or some cash inside. Or even a secret note. I printed this in PLA Silk but also I also tested it with PLA and PETG. Puzzle Difficulty: 8/10 Note: Be gentle or the nubs will wear out (more so with PLA Silk). If you are stuck go, back and try again, it only needs gentle moves to solve. **Print Profile **:Please use one of my print profiles labeled as DESIGNER. They have been tested extensively. Check out some of my other Maze Boxes!! Mini Maze Puzzle (Heaps of fun!) <a target="_blank" href="https://makerworld.com/en/models/62959" rel="nofollow noopener">https://makerworld.com/en/models/62959</a> Large Piggy Bank Maze Box: <a target="_blank" href="https://makerworld.com/en/models/58615" rel="nofollow noopener">https://makerworld.com/en/models/58615</a>

Maze Puzzle Box - Gift Container - 2 Piece

Christmas

Ciuf_Ciuf

One of the worst and most stressful things about using AMS is the amount of purged filament that gets wasted, without considering the additional time for each print. So, I decided to create this simple file without having to make any modifications to the gcode or anything else.The goal, therefore, is to minimize the amount of filament during each purge. The only necessary tool is a caliper, but you can also use a simple ruler.&nbsp;You start by setting all the purges to 50mm³<figure class="image image_resized" style="width:37.92%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_4aedbe6bc42f2.png"></figure>&nbsp;Once you've chosen which filament to calibrate, through the slicer, you set the correct sequence of chosen colors. A simple example is the photo below.<figure class="image image_resized" style="width:38.77%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_47d1448e5d29e8.png"></figure>All that's left to do is start the print and wait.What you will see in front of you will be something like this.<figure class="image image_resized" style="width:35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_5c560b0fe3b9a8.jpg"></figure>At this point, our friend, the caliper or ruler (depending on how precise you want to be), comes into play. What you need to measure is the moment when the color you've chosen stops blending with the previous color and finally takes on its clean color.&nbsp;In this case, to transition from gray to blue, 48mm are needed.Now, using a simple formula, you can calculate the final value to input into the slicer. Each rectangle is exactly 100mm³. So, you need to multiply the measured value by 2 and add it to the 50mm³ set previously. Therefore:&nbsp;Vdef = (Vmeasured x 2) + 50 = (48 x 2) + 50 = 146&nbsp;Now, I will input 146mm³ to make the color change from gray to blue.&nbsp;This process should be performed for all color changes and all possible combinations. In case the first rectangle is not enough, the one below will complete the purge. Just keep in mind that in the formula, in addition to the 50, the value of the first rectangle, which is 100, should also be included.&nbsp;For example, as it happened to me for the change from black to gray, I measured the second rectangle, finding 13mm, and then I applied the formula again, adding the value of the first rectangle.&nbsp;<figure class="image image_resized" style="width:34.24%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_556a3a54f7ecd.jpg"></figure>So, the calculation would be:&nbsp;Vdef = (Vmeasured x 2) + 50 + 100 = (13 x 2) + 50 + 100 = 176&nbsp;Therefore, I would input 176mm³ to facilitate the color change from black to gray.&nbsp;Using this method allows you to significantly reduce the amount of purged filament without affecting the color you'll load afterward. In the photo below, you can see the amount of filament that has been purged using this technique.<figure class="image image_resized" style="width:34.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_e44854969175d8.jpg"></figure>&nbsp;Comparing it with the slicer's automatic calculation, the difference is quite evident. This technique allows you to reduce purging by 30% or even less, depending on how precise your measurements are.&nbsp;BEFORE<figure class="image image_resized" style="width:35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_aaffe4a2460af8.png"></figure>AFTER<figure class="image image_resized" style="width:35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/140491/2023-11-01_45cf9e0401d838.png"></figure>&nbsp;I hope this simple idea can help you, as it helped me, to reduce the amount of filament wasted during color changes.Wishing everyone happy printing and lots of fun!&nbsp;&nbsp;

AMS Purge Calibration

Tests

TripleGWorkshop

----Shameless Cross Promotion Below----Get the single cluster here <a href="https://www.printables.com/model/417129-crystal-cluster" rel="nofollow">https://www.printables.com/model/417129-crystal-cluster</a><figure class="image image_resized" style="width:67.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/122832/2023-10-26_6zvv7yscmcx6.jpg"></figure>Get the GIANT Cluster here: <a href="https://www.printables.com/model/442857-giant-crystal-cluster/files" rel="nofollow">https://www.printables.com/model/442857-giant-crystal-cluster/files</a><figure class="image image_resized" style="width:67.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/122832/2023-10-26_ktmnoun0rbld.jpg"></figure>Crystal Cluster Bookends! <a href="https://www.printables.com/model/447388-crystal-cluster-bookends/files" rel="nofollow">https://www.printables.com/model/447388-crystal-cluster-bookends/files</a><figure class="image image_resized" style="width:67.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/122832/2023-10-26_sdihdjjxwvqx.jpg"></figure>

⧋ Crystal Wall ⧋ No Supports

Mechengg

PuzzleBox - Castle Theme

gameroom

Havoc_Eins

Scaled 140% of original&nbsp;Use normal support for easier removal&nbsp;Tested on generic PLA&nbsp;For consideration : Use of other materials such as PETG for use in aquarium tanks as different PLA has coloration additives which may or may not be safe for aquarium use. I do not take responsibility for any injury or death to Marinelife caused by using this print.&nbsp;Kindly note the second print profile uploaded by me includes 10 chain links. &nbsp;For more information and educational purposes, check out this written article on naval mines:<a target="_blank" href="https://interestingengineering.com/innovation/how-do-naval-mines-work" rel="nofollow noopener">https://interestingengineering.com/innovation/how-do-naval-mines-work</a>

Buoyant Naval Sea Mine with Chain

aquarium 

Sutcliffe.designs

<div><h1>Summary</h1><div>Just a fun planter is threw together. The planter has drainage holes and a brick patterned drip tray. Print it in the orientation shown and you will not need any supports.</div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 5</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Infill: <div>5</div><h1>Post-Printing</h1><img src="https://makerworld.bblmw.com/makerworld/draft/58020/2023-10-02_os55sz1cabtd.jpg" alt="image"></div>

Mario Pipe Planter

for friends

Lilac Rage

<h3>Homer Backing Into the Bushes Meme Christmas Ornament</h3>Back in my day we would look at our memes in only 2 dimensions, which was the style at the time.&nbsp;----------------If you like my stuff, check out my patreon<a target="_blank" href="https://www.patreon.com/LilacRage" rel="nofollow noopener">https://www.patreon.com/LilacRage</a>-------<h3>Instructions:</h3>Print face down on the build plate.Colors used in the print:&nbsp;<ul><li>Bambu Basic Yellow</li><li>Bambu Basic White</li><li>IIIDMax Tan</li><li>Generic PLA Black (Random Amazon Brand)</li></ul>&nbsp;----- Be careful using other print profiles than the one provided. I had to slow down the first layer and tweak a few things in order to get the first layer to adhere well. The individual ‘pixels’ are quite small and unless your filament is dry and well tuned, you may have issues with the first layer. I also HIGHLY recommend using a textured PEI plate for the best surface finish and better adhesion.&nbsp;___________ <a target="_blank" href="https://makerworld.com/en/u/2064416831/collections" rel="nofollow noopener">Check Out The Rest of my Ornaments Here</a> ___________ Post Your Makes in the Comments! &nbsp;

Homer Meme Ornament

nathan

maxaruta

This photobox features a 360-degree rotating base, which allows you to take photos from any angle. It is also fully customizable, thanks to the variety of wall styles available. With my photobox, you can significantly improve the perceived quality of your products to your customers. Your photos will be more professional and engaging, and your customers will be more likely to purchase them. Download the model today and start taking professional photos of your creations! _____________________________ Ti presento la mia nuova photobox, lo strumento perfetto per creare fotografie professionali delle tue stampe e creazioni.&nbsp;Questa photobox è dotata di una base d'appoggio ruotabile a 360 gradi, che ti permette di scattare foto da qualsiasi angolazione. Inoltre, è personalizzabile al massimo, grazie ai vari stili di pareti disponibili.&nbsp;Con la mia photobox, potrai migliorare notevolmente la qualità percepita dai tuoi clienti dei tuoi prodotti. Le tue foto saranno più professionali e accattivanti, e i tuoi clienti saranno più propensi ad acquistarli.&nbsp;Scarica il modello subito e inizia a scattare foto professionali delle tue creazioni!

Photobox: Take professional photos of your creations

selling

KyuubiNight

<div><h1>Summary</h1><div>An easy to print shark for all your straw topper needs!</div></div>

Shark Attack! Straw Topper

jajaum3d

🌟 Support My Work &amp; Unlock Exclusive Benefits!🌟 Become a patron on <a target="_blank" href="https://www.printables.com/@jajaum3d#join:64" rel="nofollow noopener">Printables.com</a> and gain access to early releases, commercial licenses, and more. New Version Available! Check out the latest iteration of our bunny ears design – now lighter, easier to print, and with added tiara and zip tie versions for even more customization options. Upgrade your style today!<a target="_blank" href="https://cults3d.com/en/creations/lightbunny-dual-mode-bunny-ears-accessory" rel="nofollow noopener">LightBunny: Dual-Mode Bunny Ears Accessory</a> Looking for a wider clamp? If the standard size doesn&#39;t fit your headset, check out this community-created extension that can adjust the fit to accommodate larger headsets: <a target="_blank" href="https://www.thingiverse.com/thing:6091222" rel="nofollow noopener">Extension for Bunny Ears</a> A big thank you to <a target="_blank" href="https://www.thingiverse.com/sungo1/designs" rel="nofollow noopener">Sungo1</a> for enhancing the versatility of this fun design, making it accessible for even more users!  See all my designs on cults: <a target="_blank" href="https://cults3d.com/en/users/jajaum3d/creations" rel="nofollow noopener">https://cults3d.com/en/users/jajaum3d/creations</a> All my designs are protected by Copyright Law. Purchasing does not grant the right to sell any digital file or printed model of my designs without explicit consent. Please respect the hard work of 3D artists by never sharing or selling digital files. An Easter universal accessory for your headphones Easy to install and remove.No paint and no glue needed!<h4>Printing</h4>The ears need support in the clamp only. The files are already in the best orientation to print and can be printed with your standard 0.2mm layer config. In the pictures, they were printed using 2 walls and the lightning infill to make it light. Assembling is really straightforward.

Bunny Ears for your headset headphone

summer

mingshiuan99

<div><h1>Summary</h1><div>Tape is the tongue. Remix From: <a href="/thing:308335" rel="nofollow">http://www.thingiverse.com/thing:308335</a> <a href="/thing:14531" rel="nofollow">http://www.thingiverse.com/thing:14531</a> More Photos & Process: <a href="http://mingshiuan.blogspot.tw/2014/05/3dt-rex-tape-dispenser.html" rel="nofollow">http://mingshiuan.blogspot.tw/2014/05/3dt-rex-tape-dispenser.html</a> Infill:10% Number of Shells:2 Layer Height:0.2mm</div></div>

T-Rex Tape Dispenser

school 

Brian Dean

<h2>Embedded Magnet Dispenser Tool for Multiple Diameters and Thicknesses</h2><h3>PROFILE NOTE</h3>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.<h3>Latest Update (2024-04-21): Quick summary</h3><ol><li>additional magnet sizes</li><li>magnet size text embossed on the barrel and also included on the slider</li></ol>See below for the more detailed update notes.<h2>Magnet Dispenser for 3D Prints: Simplify Magnet Insertion with Precision</h2>The Magnet Dispenser Tool is expertly designed to streamline the insertion of magnets into 3D prints. This tool not only speeds the process of inserting magnets into 3D Prints, it also ensures correct orientation and secure fitting, making it ideal for projects that require precise magnet placement.<h3>Key Features</h3><h4>Dual Dispensers for Perfect Alignment</h4><ul><li>Includes two dispensers for each magnet size – one for north-up and one for south-up orientations</li><li>Use different colors (e.g., red for north-up and blue for south-up) to help easily identify the dispenser&#39;s orientation</li><li>Eliminates the hassle of misaligned magnets</li></ul><h4>Design and Utility</h4><ul><li>Developed after extensive refinement</li><li>Allows for friction-fit insertion and is also suitable for magnets that are glued</li><li>Tapered tip facilitates use in tight spaces</li></ul><h4>Ease of Use</h4><ul><li>The dispensers are designed to accommodate the specified magnet sizes for their internal holding magnets, but can dispense magnets of any thicknesses for the specified diameter. For example, for the 6x3mm dispenser, you will need 6x3mm magnets to assemble the dispenser, but once assembled, that dispenser can dispense any 6mm diameter magnet such as 6x1, 6x2, 6x3, 6x5, etc.</li></ul><h4>Convenience and Storage</h4><ul><li>Features a snap-on cap with an embedded magnet and a top slider magnet</li><li>Ensures secure storage and prevents accidental magnet spillage</li></ul><h4>Customization and Printability</h4><ul><li>No supports needed for printing</li><li>STL and STEP files included for personal customization</li><li>Compatible with PETG, PLA, ASA, ABS, etc</li><li>Adjust x/y hole compensation if needed for perfect fit</li></ul><h4>Visual Guide</h4><ul><li>Fusion 360 images provided for easy assembly and understanding of the internal mechanism</li></ul><h4>Use the Magnet Dispenser for a hassle-free, precise, and efficient magnet insertion experience in your 3D printing projects.</h4><h3>Supported Magnet Sizes</h3><h4>Dispensers are now provided for the following magnet sizes as of Version 5</h4><ol><li>2x1mm</li><li>2x2mm</li><li>2x3mm</li><li>3x1mm</li><li>3x2mm</li><li>3x3mm</li><li>4x1mm</li><li>4x2mm</li><li>4x3mm</li><li>5x1mm</li><li>5x2mm</li><li>5x3mm</li><li>6x2mm</li><li>6x3mm</li><li>7x2mm</li><li>7x3mm</li><li>8x2mm</li><li>8x3mm</li><li>8x4mm</li><li>9x2mm</li><li>9x3mm</li><li>10x1mm</li><li>10x2mm</li><li>10x3mm</li><li>12x2mm</li><li>12x3mm</li><li>15x2mm</li><li>15x3mm</li><li>20x2mm</li><li>20x3mm</li></ol>NOTE 1: The 1mm magnet thickesses are just too thin to work reliably with the friction-fit of the slider and caps. Therefore, I have made the pockets of the “1mm” thickness magnet dispensers to be that of the 3mm variety so that they work. So to assemble a 1mm magnet thickness dispenser, you will need to purchase a few 3mm thick magnets to assemble the dispenser. A 2mm thickness will likely work ok, too. Note that the text on the dispenser will still say “D x 1 mm” for the barrel, “Dx1” on the cap, and “D/1” on the slider, so you know what magnets you have loaded into it.&nbsp;NOTE 2: the above are the sizes needed to assemble the dispenser. The dispenser can still dispense any thickness of magnet as long as the diameter is the same. So if don&#39;t see your specific magnet thickness listed above, you can still print the correct diameter, assemble the dispenser with the correct magnet thickness, and dispense other thicknesses.&nbsp;STEP and STL raw files are included if you do not wish to use the provided profile.<h3>Quality Assurance Testing</h3><ul><li>All dispenser sizes have been printed by me and extensively tested</li><li>I have purchased all magnet sizes at significant expense to myself to ensure fit</li><li>Magnet diameters are tricky for press-fit tolerance and controlled by no less that 5 Fusion 360 parameters that must be balanced to achieve good fit<ul><li>Multiple iterations of each dispenser were printed and refined</li><li>Many kilograms of filament and hundreds of hours of print-time were consumed during this process</li><li>All to ensure the best quality printing and fit-up for each dispenser size</li></ul></li></ul><h3>About the Profiles</h3><ol><li>Please use the “Designer” profile as it guarantees the latest files and version with all new magnet sizes and features. The Designer Profile will be listed at the top.</li><li>NOTE: The “Designer” profile is a single profile that contains plates for all magnet sizes so far. Please ignore the “total time” reported by MakerWorld for the profile. You only need to print the plate(s) that you need. Each plate takes about 2.5-2.9 hours on my X1C using the included “PETG” profile which is slowed down for good PETG layer adhesion and quality.</li><li>While the other profiles may be ok, their file / update version may be out of date. So if you want the latest sizes and model improvements, please choose the top “Designer” profile.</li></ol><h3>Accessories</h3>Be sure and check out some nice accessories that other folks have created to work with these dispensers.<ul><li>Tip Caps - these are nice caps for the dispensor tip. Not only do they help keep the magnets contained within, but they also protect the tip. Additionally, they are labeled with the magnet size, which is nice. Thank you @onegotowned ! <a target="_blank" href="https://makerworld.com/en/models/149038#profileId-162633" rel="nofollow noopener">https://makerworld.com/en/models/149038#profileId-162633</a></li><li>Vertical Workbench Stand - This is a very nice stand for select diamagers made by @nickramsey57. A number of folks have asked about stands / organizers for the dispensers, so this model will likely be useful to a number of folks. Thank you @nickramsey57 ! <a target="_blank" href="https://makerworld.com/en/models/206388#profileId-226561" rel="nofollow noopener">https://makerworld.com/en/models/206388#profileId-226561</a></li><li>Vertical Workbench Stand (parametric) - Here is another very nice stand made by @RevHazlett. You can specify the dispenser sizes that you want it to hold and then generate, making it customizable to your needs and the common magnet sizes that you use. Thank you @RevHazlett! <a target="_blank" href="https://makerworld.com/en/models/435087#profileId-340031" rel="nofollow noopener">https://makerworld.com/en/models/435087#profileId-340031</a></li></ul><h2>Update History</h2><h3>Version 5: 2024-04-21</h3><ol><li>Emboss the magnet size text on the Barrel (see photos), allowing one to view the size from the side, and also allowing one to print all of the barrels on a single plate and not get the barrels mixed up as to what size they are for.</li><li>Include the magnet size text on the Slider (see photos), allowing one to print all of the sliders and caps together on one plate and not get the sliders mixed up as to what magnet size they are for. Also provides additional text identification of the magnet size within.</li><li>Include 11 new magnet sizes:<ol><li>3x1mm</li><li>4x1mm</li><li>5x1mm</li><li>7x2mm, 7x3mm</li><li>8x4mm</li><li>10x1mm</li><li>15x2mm, 15x3mm</li><li>20x2mm, 20x3mm</li></ol></li><li>Re-organize the plates so that they are a little easier to manage. All dispenser sizes for each “diameter” are spread across three plates now - the Barrels, the Red Caps and Sliders, and the Blue Caps and Sliders. This allows one to “print-by-layer” instead of “print-by-object”, and the text also comes out better. Additionally, it is now easier to construct a plate with all of the size variations on 3 individual plates and print them all at once.</li></ol><h3>Version 4: 2023-12-26</h3><ol><li>Fixed an issue where the smaller diameter magnets such as the 2mm, 3mm, and possibly the 4mm magnet diameters could inadvertently slip through the vertical barrel slider stem slot. Prior to this update, the slider stem was a fixed 3mm + tolerance width. With Version 4, the slider slot is now dynamic based on the magnet diameter. So now, the smaller diameter magnets are captive within the barrel and cannot slip out inadvertently.</li><li>Tighten up the tolerances between the “slider” and the “barrel” for a better fit and smoother operation.</li><li>Use the Profile: “Version 4: All Sizes …” for the latest from this update.</li></ol><h3>Version 3: 2023-12-22</h3><ol><li>Added additional magnet sizes<ol><li>2x1mm, 2x2mm, 2x3mm</li><li>9x2mm, 9x3mm</li></ol></li><li>Text is now added within the Fusion 360 Model File, eliminating the need to add the text using Bambu Studio<ol><li>Ensures consistent text placement and easier colorizing of the text</li></ol></li><li>All plates are included for all magnet sizes, two dispensers per plate, print sequence: print-by-object</li></ol><h3>Version 2.1: 2023-11-28</h3><ol><li>Added additional magnet sizes<ol><li>3x2mm</li><li>4x2mm, 4x3mm</li><li>5x2mm, 5x3mm</li><li>6x2mm</li><li>8x2mm, 8x3mm</li><li>10x2mm, 10x3mm</li><li>12x2mm</li></ol></li><li>The magnet size text is included on the cap for easy identification - see photo</li></ol><h3>Version 2: 2023-11-20</h3>Updated to “Version 2”. Significant updates an enhancements have been made, some seen, some unseen.<ol><li>Added additional magnet sizes<ol><li>3x3mm</li><li>12x3mm</li></ol></li><li>Each magnet size is on its own plate, two dispensers per plate, print sequence: print-by-object</li><li>Redesigned “thumb slider” for greater comfort and stronger press force</li><li>Slider stem has been reinforced</li><li>Many enhancements for smoother operation with internal chamfers and fillets, enhanced tolerances, and strengthening of key internal components</li></ol>&nbsp;&nbsp;&nbsp;

Embedded Magnet Dispenser Tool for 3D Prints

tools

PartiallyToned

Added a catch tray and enlarged the model the below print in place tower i found. No supports needed.https://www.printables.com/model/291921-print-in-place-dice-tower

Medieval dice tower with catch tray

Brithawkes

butterfly earring 2 hope you like.

butterfly earring 2

earrings 

WagZPrintZ

A melted snowman.. you know the gig.. &nbsp;You'll need to heat the edges to give it that “melted” look! &nbsp;Scale to whatever size you wish, but keep thickness the same as original so it bends easier once heated!

Melted Frosty

decorations Christmas 

PS11-Print

Ich habe mir diesen AMS-Stand konstruiert weil meine ganzen Utensilien die ich am Drucker benötige ständig irgendwo rumliegen.Dieser ist komplett zum zusammenstecken und es muss nichts geklebt oder geschraubt werden.Der Zusammenbau ist nahezu selbsterklärend und kann ohne Probleme von jedem durchgeführt werden. &nbsp;Ich habe jetzt zusätzlich einen Druckplattenhalter für 5x Platten konstruiert.Dieser kann ohne Probleme auf den AMS-Stand gesteckt werden und dann das AMS auf den Drucklplattenhalter.Jetzt kann man sich frei wählen ob man den 5-Fach-Halter oder den 3-Fach-Halter nimmt.Oder beide :-)&nbsp;Ich habe als Option einen Druckplattenhalter für 3-Platten konstruiert der je nach Wunsch mit dazu gedruckt werden kann.►Wenn der AMS-Stand ohne Druckplattenhalter verwendet wird benötigen Sie die Pos. 013-TPU-Feed-6x►Wenn der AMS-Stand mit Druckplattenhalter verwendet wird benötigen Sie Pos. 070-Connector-Pin-4x und Pos.080-TPU-Feed-4x►Der Druckplattenhalter wird mit Hilfe der Connector-Pins verbunden. Die Drehrichtung gibt der Pfeil auf dem Pin an.►Für die Schubladen habe ich ein Schild gemacht das individuell beschriftet werden kann ( Bambu-Studio ) ►Diese Schild ist zum einklippsen damit es gewechselt werden kann.►Das Bambu-Logo ist auch nur zum stecken und hält bei mir sehr gut.►in den beiden Seitenteilen und dem Mittelteil ist ein durchgehendes Loch in das Sie je nach Ihren wünschen Filament mit dem Ø1,75mm einschieben können um dem ganzen einen Farbtupfer zu geben :-)►ich habe mich für PLA-Bambu-Green entschieden da mein AMS-Stand auch diese Farbe enthält.►gedruckt habe ich diesen Stand komplett in PLA ►Bambu-PLA-schwarz Basic►Bambu-PLA-weiß Matt►Bambu-PLA-Bambu-green&nbsp;Ich werde in naher Zukunft für die Schubladen noch Einsätze konstruieren für die verschiedenen Bambu-Ersatzteile und diversen Dinge die man so für seinen Drucker hat.&nbsp;

AMS-Stand with optional Buildplateholder 3x or 5x

bambu x1c accesories

Saber3D

Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;New dragons, creatures, and more released every month to my patrons, thank you for supporting my work! &nbsp;Follow our socials to see new models! <a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">Instagram</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">TikTok</a>&nbsp;This flexi dragon was designed to take less time but still give you the awesome look of a large dragon as well as make custom designs as easy as possible! Every part of this dragon can be easily painted in your slicer of choice, just make sure edge detection is turned off 😉&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;