Bartek z Shozo

ENIQUE3D

paper bag planter to match the paper bag vase.&nbsp;The paper bag vase can be found here&nbsp;<a target="_blank" href="https://makerworld.com/en/models/482022#profileId-393912" rel="nofollow noopener">https://makerworld.com/en/models/482022#profileId-393912</a>&nbsp;just add some string or ribbon

Paper bag Planter

Art deco 

vanbluca

Hey guys!When I first saw the wireless bambu mouse, I knew I wanted to make one. Unfortunately, I was really bothered by the ugly sudden flat rear of the mouse. I decided to take matters in my own hands and remodel it with a more aesthetic organic shaped round rear. It could be slightly harder to print vs the original design, however I had no issues first try.I hope you enjoy this version!&nbsp;Edit:Since my original profile may cause issues depending on your bed adhesive, I have added a second profile with improved adhesion.

Wireless Mouse 002 - rounded rear

Do druku

黎了个小噗

在原基础上添加了尾托和透气孔洞，用于减轻重量，减少汗手带来的困扰。On the original basis, tail brackets and breathable holes have been added to reduce weight and alleviate the inconvenience caused by sweating.

Wireless Mouse 002 with holes

Narzędzia

ManuZiloop

&nbsp;Here is my Tiny basket and poop deflector.Lots of them here and there but they do not fit my needs, most of them are too big.&nbsp;Check my other models: <a target="_blank" href="https://makerworld.com/en/@manuziloop" rel="nofollow noopener">https://makerworld.com/en/@manuziloop</a>&nbsp;**** If you enjoy my design, please give it a “BOOST” (click on the button)***&nbsp;&nbsp;

A1 Mini Tiny Poop Bucket and Deflector

A1 Mini parts

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA+ IIID Max Black Transmission Distance: 0.5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max White Transmission Distance: 5.6&nbsp;Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Grey At layer #22 (1.84mm) swap to White for the rest.

Horse Face Art Hueforge

jgruber15

Made a horse shelf bracket for my daughters room, printed 1 at a time, mirror either side of it.

Horse Shelf Brackets

Różne

Squish3D

Do NOT adjust the thickness (Z) in your slicer!! The layers will not come out right. You CAN adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.&nbsp;These were my settings and colors for my print that you see in the picture. Your results may vary depending on the filament you use and if you have your own HueForge profile saved with different settings.&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Nozzle: 0.4&nbsp;Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA Sunlu White Transmission Distance: 6 This print uses 4 unique filaments&nbsp;Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #14 (1.2mm) swap to Brown At layer #17 (1.44mm) swap to White for the rest

Horse - HueForge

HueForge

themaclean

Credit to original author <a target="_blank" href="https://www.thingiverse.com/anonpaluch/" rel="nofollow noopener">https://www.thingiverse.com/anonpaluch/</a>This remix and profile is fine tuned to print with PLA Silk on a Bambu Labs A1 mini with much trial and error to figure out the best system of supports.

Reverse Centaur / Anti-Centaur

Zabawki

MasterChiefDK

I needed some new plugs for the chassis on my Honda VF750S (V45 Sabre in the US) so I made my own. It will probably fit other models as well. Figured others might like them too. :) The fitment should be tight so depending on the filament, you might need to scale it 1-2%