BamseMoms

bonsay_x

I made this chain to be lighter and avoid touching the carbon axis, it works really well. if you don't have the enclosure you can print it in PLA, otherwise I recommend PETG, ASA or ABS. If you don't use my slice plate you have to print 25 normal links and 3 ptfe holder links

Smaller, lighter and prettier cable chain

p1p-AMS

3DPrintable.art

<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><h2>Please read these instructions before printing!</h2></td></tr></tbody></table></figure>Adorable articulated teddy bear, perfect for a toy, a gift or a decorative item. This bear can stand up and sit down, and its arms and head can move. &nbsp;Works well in single or multi-color prints. Be creative and share your results!&nbsp;Don't be scared but printing this model will require supports:<figure class="table" style="width:95.8%;"><table class="ck-table-resized" style="border:0px solid hsl(0, 0%, 100%);"><colgroup><col><col></colgroup><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2023-12-30_3820f9457a368.jpg"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">An example of a finished print with supports. As you can see, the model is surrounded by these weird structures, which are called supports.&nbsp;Support structures are used to support overhanging geometries and need to be removed once printing is over.&nbsp;There are <a target="_blank" href="https://www.google.com/search?q=How+to+remove+support+structure+from+3D+prints" rel="nofollow noopener">multiple guides online</a> that will teach you how to use and remove supports, but it might be helpful to use some of these tools:<figure class="image image_resized" style="width:70.84%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_3aba5e239a66c.png"></figure>&nbsp;Please avoid applying excessive force by hand, as it might break the printed object.&nbsp;Bambu Lab also has a great <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/support" rel="nofollow noopener">wiki article</a> that explains how you can use different support settings. If you find a better support configuration, please share your print profile.</td></tr></tbody></table></figure>For a perfectly smooth surface, you can use a different <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.<figure class="table"><table style="border-style:solid;border-width:0px;"><tbody><tr><td style="border-style:solid;border-width:0px;">To <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change" rel="nofollow noopener">minimize filament waste</a>, we strongly recommend printing multiple objects simultaneously. &nbsp;The provided print profiles are merely suggestions, and when selecting different colors, please ensure that you update the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/reduce-wasting-during-filament-change#auto-calc-flushing-volumes" rel="nofollow noopener">flushing volumes</a> to prevent any unexpected color mixing.</td><td style="border-style:solid;border-width:0px;"><figure class="image image_resized" style="width:80.65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-02_0dbb0bcdbe4e8.png"></figure></td></tr></tbody></table></figure><figure class="table"><table style="border:0px solid hsl(0, 0%, 100%);"><tbody><tr><td style="border:0px solid hsl(0, 0%, 100%);"><figure class="image image_resized" style="width:80.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/371694/2024-01-06_1ecd40b55155e.png"></figure></td><td style="border:0px solid hsl(0, 0%, 100%);">If you want to create your own print profile, please note that the neck is typically the weakest spot. It is recommended to reinforce it with a higher infill or additional wall loops.&nbsp;This should prevent it from breaking easily when removing supports or playing with the toy.</td></tr></tbody></table></figure>COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Articulated Teddy Bear (print-in-place)

figurer

MagicHappenZ

<div><h1>Summary</h1><div>I found the gap in the original design unnecessary as it just makes the great design less stable. I also made it 1mm longer so it fits better in place without vibrating. Finally I fixed the mesh and changed orientation.Since I don´t have the original file, the mesh looks still not perfect but you can print it in place and get a perfect fitting stable camera shade that also protects the camera from slight crashes.Special thanks to @MagicFred, the original designer.</div><h1>Print Settings</h1>Printer: <div>Sapphire Plus</div> <pre><code> Rafts: <div>No</div></code></pre> Supports: <div>Yes</div> <pre><code> Resolution: <div>.12</div></code></pre> Infill: <div>0%</div> <pre><code> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=eins3D+ABS" target="_blank" rel="nofollow noopener"> eins3D ABS </a> Black Notes: <div>I printed this in ABS which is light but stable. I used only walls and no infill. Print it as it is and make sure to only print supports as in the picture.</div></code></pre></div>

DJI (Mavic) Mini1/2 Camera Shade

Not Punny Labs

A spiralized christams tree light for use with an LED tea light.

Spiral Winter Tree LED Tea Light

pene ting

JamesThePrinter

Articulated monarch butterfly&nbsp;Approximately 140x103x8mm.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>

Articulated Monarch Butterfly

artucilated

NUKDDD

UPDATE 11/11: Added a print profile called "HEAVY Fuzzy Fast fudge", 40% infill for the fudge body, 15% on the pole, adds a bit of heft while not too heavy to torque itself out of your hand. *A <a target="_blank" href="https://makerworld.com/en/models/62436#profileId-65008" rel="nofollow noopener">Greek Doric column stand</a> is now available for this so its tip isn't so high in the sky when you're not fidgeting with it. &nbsp;Nothing else needed, print in place, no support with fuzzy skin turned on. Don't like it fuzzy? I got you covered too 😉 &nbsp;The mechanism is super smooth regardless which shit you're into.&nbsp;"I thought I was done with this but it keep pulling me back!" - thoughts of everyone fidgeting with these little dollops of fudge. &nbsp;There are 2 versions, fast and slow, although both are pretty fast but one is faster, so I guess the more appropriate names for them should be Fast and Furious 🥁 gotta catch 'em all! AM I RIGHT!?&nbsp;This aint your cup of tea? give me a like for the lolz and check out my other fudges <a target="_blank" href="https://makerworld.com/en/models/59096#profileId-62469" rel="nofollow noopener">here</a>, <a target="_blank" href="https://makerworld.com/en/models/60044#profileId-62158" rel="nofollow noopener">here</a> and <a target="_blank" href="https://makerworld.com/en/models/56021#profileId-57551" rel="nofollow noopener">here</a>. Skipped your coffee today? <a target="_blank" href="https://www.buymeacoffee.com/nukddd" rel="nofollow noopener">Consider passing it on to me</a> 😏

The Fast and the Furious Fudge - Spiral Fidget Toy

leker

rfnovo

Remix the original model to: - Eliminate the hump on the blade that allow you to use both edges for measurement- Added a cut to top plate to replace the hump on the blade, so you can still push out the blade easily- Added cut holes so you can measure any angle easily - Reduce the size to be something more “pocket size”

Angle Finder

verktøy

Autonumous

A drone prop nut spanner Fitting 8,10,5.5 & 4 mm nuts<h3>Print instructions</h3>I printed using PETG at 0.15mm

Drone Prop Spanner

drone

RemcoGoy

Created a remix of the original skadis shelf. My design is made so it spans the whole width of a small ikea skadis board.Use the original hooks and glue them into placehttps://www.printables.com/model/304196-gps-skadis-hook-ng-step

Skadis Shelf by GP Remix

skådis ikea

Extrutim

Over 90 000 downloads and over 20 000 likes speaks for itself, a very popular filament clip now for you, here!&nbsp;A simple filament clip which prevents the filament from unwinding reliably! I&#39;ve tested many filament clips in the past, but couldn&#39;t find one that I was 100% satisfied with. Out of this need I have designed this small clip!&nbsp;This is the easiest way to attach the clip: Hold the end of the filament between your thumb and index finger, and press down on the previous winding with your middle finger. This way you can loosen the previous winding a bit to make it easier to get underneath with the clip to attach it. Do it a few times and it will be done in a few seconds.&nbsp;Important: Make sure your filament is not over extruded. This can cause the clip to not work as well as it could. I recommend regular PLA, Silky PLA has a poorer layer adhesion which can cause the clip to break.&nbsp;<blockquote>Tip:  2.85mm filament? Just scale the clip in your slicer to 160%.</blockquote>The most important features in short:<ul><li>Only requires about 1g of filament and prints in about 7min.</li><li>Does not attach to the spool. This makes it compatible with any filament spool and they can still be stacked easily.</li><li>Has a grip for easier handling.</li><li>A &#34;scoop&#34; to get under the previous winding better.</li><li>Bends the filament just slightly and therefore doesn&#39;t damage it.</li><li>A separate version with a hole in the grip to hang it up.</li></ul>The different clips explained separately:&nbsp;The classic: Unchanged because the vast majority are perfectly satisfied with this clip.The stronger clip: If you use Silky PLA or another filament with poorer layer adhesion, this scoop will be more sturdy.The clip for beasty filament: Filaments like PC are very slippery and stiff at the same time. The previous turn is clamped much stronger and prevents slipping.The closed clips: If the filament is fed into a Bowden tube these clips can stay on the filament. The hole is shaped so that the filament when it is straight simply slips through, if it is wound on the spool it holds the filament by its bending. There are these two versions, depending on which one you like better in handling.&nbsp;Remix? Please remember to select the same license as from this model when remixing.&nbsp;You can find <a target="_blank" href="https://www.printables.com/model/24371-grandmas-favorite-filament-clip" rel="nofollow noopener">the original upload here</a>, of course I would be very happy about a like and a follow there!<blockquote>Commercial use: Even if the license forbids this I agree if you show this model to your audience in a video etc. or use it if you run a business. Only selling the files or the physical model is prohibited. Please remember to name me as the author and link to this page.</blockquote>

Grandma's Favorite Filament Clip

3D printer

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

Portable Cable Organizer / Winder

computer things

Jorge Rui

<h3>Introduction</h3>This model has been specially developed to take full advantage of the printing bed of most printers, which is approximately 200x200 or a little more.but it can also be used for anything else, with saving writing material, drawing etc.<ul><li>This gray module you see is specific to 100x150mm index-cards (4x6 inches). To get an idea of the dimensions, it allows you to put a little more than 700 cards of 180g/m^2</li></ul><figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_xznmnldpwl14.jpg"></figure>Of course, in the case of a modular system it is possible to accumulate as many modules as you need, that is, the system will grow according to your needs.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_1adne8yera7t.jpg"></figure>You can use colors for each of the groups, thus organizing your workflow.<h4><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_oa9zzg75e1an.jpg"></h4>And a new 76,2x127,0mm (3x5 inches) that you can find in “3x5 module.3mf” in files.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-09-26_cfcdbdafdbe5d.jpg"></figure><h4>Printing</h4>These cards are the second largest, and so as you can see the boxes are not small either (like I&#39;ve said in the beginning, they use almost all the print bed area (PRUSA MK series). You will have to wait a few hours before you can use your slip-box, but you will get it and it look fantastic. If you want other dimensions send a message or change this to your needs.It is however a remarkably simple impression, without supports, without anything special. The infill is up to you, the default 15% is ok.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-08-21_phzp7i2ry0gj.png"></figure><h2>Change log</h2>(26-09-2023) - Added some tabs, maybe they help. Only 2 layer thickness.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2023-09-26_3d743f3b1a109.jpg"></figure><ul><li>Added a 3x5 box to files.</li></ul>And a diferente application, board games sleeves and baggies, thanks to <a target="_blank" href="https://makerworld.com/en/@marco.boschetto" rel="nofollow noopener">marco.boschetto</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000013523/design/2024-06-27_1e261084396fc.webp" width="1080" height="1440"></figure><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&amp;no_recurring=0&amp;currency_code=EUR" rel="nofollow noopener">paypal, </a>or even better, join “My Club” here in printables.com, that will be greatly appreciated.&nbsp;