Beautiful Madness

DrJones

Yet another one of my experiments with gear designs (and I&#39;m not done yet). Every gear has a different number of teeth, and the sun gear is not in the center (thus literally eccentric). Still, quite fidgetable.The hex holes should fit normal hexagonal pencils.&nbsp;Note: With a bit of force this model can be disassembled. Depending on printer, filament, settings and some luck, the force required varies, and for some the model even disassembled by itself. I&#39;m sorry for that! If it happens, you can probably reassemble it (the ring can be squished a bit to get gears in or out) and thus have some kind of puzzle, but that is selling a bug as a feature…However, if this model doesn&#39;t work for you I recommend the <a target="_blank" href="https://makerworld.com/en/models/484859" rel="nofollow noopener">“binary sun gear”</a>, it is more stable and also eccentric (and I find it more interesting).&nbsp;I added another version (&#34;tighter&#34;) with lower tolerances.&nbsp;Printing: I recommend random seam placement.

The Eccentric Gear Fidget

spiele

Wcad00

Update december 1st<ul><li>the chair is modified with a larger magnet hole </li><li>the missiles from the underside launcher are a little smaller</li><li>the back gun now has an aligment to make it easier to fit</li><li>updated the assembly pdf with the underside launcher and cockpit assembly</li></ul>&nbsp;&nbsp;This is my take on a batwing. its 100% my design and a real labor of love for me. assembly is pretty strait forward.the model is almost 80 cm across so be mindful of that. also attached an assembly guide, not the best, but like i said, it shoud be pretty straight forward..all pieces printed perfectly and require no sanding.Hope you enjoy this model and whom ever decides to take on this print please feel free to contact me for anything.its all printed in BL matt charcoal PLA, and i have to say it turned out gorgeousAlso it is split so that all plates print in 1-2 hours, so it minimises the printers usage; there are two exceptions on the large parts of the wings but that is it.&nbsp;Also photos are available athttps://s.go.ro/vs3zltii | password: 230926there are over 60 so i couldnt upload them here.Next few days i will upload better quality photos of the entire plane&nbsp;I also have a project for a batman beyond style vehicle, it will be proportional to this one. so stay tuned if you like my overall aesthetic .

Batwing

spass

Makefy

It's planting season!<blockquote> TIP: Use a cotton pad in the bottom of each pot to keep the dirt from spilling into the bottom tray! &nbsp;</blockquote>&nbsp;This is a new version of a design I made and tested last season. Turned out to work great.The assembly consists of the following parts: Bottom Tray: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_52bc4f5b6a06.png"> This is the main part which holds water. It has guides for the pots and slots for the connecting beams. It should have enough solid bottom layers to avoid any infill. Just to make sure it's completly watertight.&nbsp;Connecting Beam: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_ab0b1e814f06f.png"> This is the part that supports the top plate. You will need 4 of these &nbsp;Pot: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_fb839ee86539c.png"> This is the pot itself. It consists of two parts that snap together. PLA seems to hold up pretty good for this part, but PETG or ABS might be a better choice. Top Plate: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_df2f64c41e23d.png"> This parts connects to the bottom tray with the four beams and holds the pots Greenhouse Dome: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_66dfe67204146.png"> This is a clear cover which provides a warm and humid environment for the seedlings. This part is provided in a separate print profile and should be printed in clear PETG or PC: — OPTIONAL --- Dirt Funnel: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_5f6384536a117.png"> The funnel makes it easier to fill the pots with dirt The Pestle: <img src="https://makerworld.bblmw.com/makerworld/draft/678120/2024-03-09_2ac2891fe5821.png"> Use this to gently pack the dirt.

Self Watering Seed Starter/Planter with Splittable Pots and Greenhouse Dome

nützliches

user_3697187356

porta alexa per echo dot 4 gen - Alexa port for echo dot 4

T800 alexa

alexa

jponky

This is version 2 of the A1 Mini Accessories Toolbox Tray. It now holds space for 4 nozzles! I learnt how to use Fusion360 a little bit more and now the alignment for the nozzles should fit properly. I've had to get rid of the Bambu Lab logo but I think that's a good trade off. Just wanna say what a great printer the A1 Mini is, the speed and quality is so good that I've more time to spend on designing and printing things. This would've taken me a lot longer on my old printer. &nbsp;The changes include: <ul><li>Holds 4 nozzles instead of 3</li><li>Space for nozzle cleaner/unclogging tool</li><li>Space for spare cutters, nozzle wiper and a PTFE remover (which can be downloaded here <a target="_blank" href="https://makerworld.com/en/models/79328#profileId-83766" rel="nofollow noopener">PTFE Tube Remover V2.1 for the A1 Mini Remixed by R3DPanda - MakerWorld</a> - made my R3DPanda) </li><li>More finger space to pick up tools as some things were a little hard to remove.</li></ul>If uploading STL files, you need to select both files and load them as a single file. &nbsp;Thanks for the feedback everyone! Hope you like this version!&nbsp;Link for the Toolbox used in the photos:<a target="_blank" href="https://makerworld.com/en/models/65527#profileId-68895" rel="nofollow noopener">A1 Mini Tool Box - Multi Color by hfoster52 - MakerWorld</a> &nbsp;

spiele

spass

nützliches

alexa

3d Drucker zubehör