BDrew

planpa3d

I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.Just can’t wait to see the Movie being released this year!!Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.NOTE: This version does not include the Switch game holder insert, the hex pieces to hold the spikes, nor the spiked pieces themselves.If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,<a href="https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer" rel="nofollow">https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer</a>&nbsp;I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm<a href="https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow">https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1</a>&nbsp;All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together. The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.With the trim printed and assembled, it should be glued to the completed bottom shell.When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on.&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here…<a href="https://www.patreon.com/planpa3d" rel="nofollow">https://www.patreon.com/planpa3d</a>&nbsp;Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…<a href="https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert" rel="nofollow">https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert</a>&nbsp;Happy Printing,Jeremiah&nbsp;

Turtle shell container

Nintendo

pennywice

Wanted to combined a Wera tool check plus mini ratchet and bit kit, with a knipex pliers wrench XS and cobra XS. So, i designed this in Solidworks so i could snap the two wrenches onto the wera, which are hold in place with magnets. The brackets for mounting is separate parts, which makes it easier to mount and better to print. Printed in PETG, and works flawless! Needed for model: 1 x “Tang-Wera_Large V1” 2 x “Tang_WeraMount_V1” 2 x M3x6 socket head scews 2 x M3 nut 6 x Ø10mm x 3 mm magnets Glue for magnets

Wera tool check plus & 2 x Knipex pliers

Tools

BoardGamer’sBoutique

Quick Fun, Anywhere!&nbsp;Have you ever been out with the kids, just dying for some fun? Dentist waiting room, restaurant, long car ride?&nbsp;Well here's an idea! Say hello to Emergency Connect4. Consisting of 5 cards the size of a credit card, you have a ready to assemble game of Connect4.&nbsp;This print file contains 3 different cards/sprues.<figure class="image image_resized" style="width:57.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/721984/2024-03-06_681f1939c26e8.png"></figure><ul><li>Sprue A<ul><li>This contains one half of the main game board and one of the side supports. You'll need (2) of this card.</li></ul></li></ul><figure class="image image_resized" style="width:55.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/721984/2024-03-06_db8fdc740490f.png"></figure><ul><li>Sprue B<ul><li>This contains the base for the gameboard and also the legs for the game to stand on. You'll need (1) of this card.</li></ul></li></ul><figure class="image image_resized" style="width:37.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/721984/2024-03-06_bd13b7c9f9d02.png"></figure><ul><li>Sprue C<ul><li>This contains 20 chips to be used for the game. You'll need (2) of this card, each in a different color.</li></ul></li></ul>Assembly Instructions:<ul><li>NOTE: I recommend pushing the pieces out of the sprue from the back side (less likely to damage the bottom edge), or using side cutters for reduced cleanup.</li></ul><ol><li>Once all pieces are removed from the sprue, insert the side supports (2) for the main game board into the base (3).</li><li>Insert the main game board (1) into the base (3). (I found this can be a tad easier if I put the pieces together to form the entire board, then push them into the base together.)</li><li>Press the legs (4) onto the base (3).</li><li>Pop out the chips (5).</li><li>Play!</li></ol>DisclaimerI've attempted to thoroughly test the clearances and the sprue attachment points, I've successfully printed this several times in it's current iteration (while it's only my 3rd major revision, I've gone through about 11 iterations to this point). I've found a balance of easy removal from the sprue and ease of assembly that I'm really happy with. If you find any issues, please let me know so I can address them! For reference, I primarily use PLA Matte materials, so YMMV with others.&nbsp;If you like games, check out this Santorini-Inspired game I made called <a target="_blank" href="https://makerworld.com/en/models/378243#profileId-278199" rel="nofollow noopener">Brothers of Egypt</a>:<figure class="image"><a href="https://makerworld.com/en/models/378243#profileId-278199" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/721984/2024-03-17_a8e5a3df9cd18.jpg"></a></figure>

Emergency Connect4 Kit Card

kit cards

AKinferno

I am the original creator of this remix. First posted on Thingiverse in April 2022.&nbsp;WHY I MADE IT?Started with the Articulated Axolotl by WheatlyLaboratories. My daughter liked it… until my wife saw it and mentioned “the fringes on the axolotl are what make it cute.” So, of course my daughter no longer liked it. So, I found Zoid5's "Axolotl Head for Miniature Jointed Dragon", which I think ultimately came from schlossbauer's "Axolotl". Long story still long, I put the Axolotl head, Zoid5 likely cut from schlossbauers model, onto the Lizard body from WheatlyLaboratories, which I assume is from McGybeer, because WheatlyLaboratories' axolotl didn't get my wife's cuteness approval. My newer high res model is directly from MacGuybeer and schlossbauer.I originally uploaded two versions. The angled slightly smaller lizard body WheatleyLaboratories uploaded at 45 degrees, I assume for smaller beds. And the slightly larger, high res lizard body uploaded by McGybeer, both allowed remixes. The larger one had a slightly scaled up head. Originally, the heads were flattened to better match the body dimensions. But I ended scaling the body up to match the original head due to requests in comments, along with the curled version I made curled myself. The new files are using modified versions of McGuybeer's lizard. He is an excellent modeler. Please support him. The Axolotl head is from Schlossbauers model, with extensive (for me) work making it more printer friendly.&nbsp;FUN FACT: In Japan, axolotls are called "Oopa Loopas".&nbsp;HOW TO PRINT: <ul><li>.10 -.20 layer height on .40mm nozzle, </li><li>2 or more walls, </li><li>10% or higher infill (20%+ has nicer weight),</li><li>no supports needed. </li></ul>Straight model can be scaled down to 70% and maintain articulation (YMMV). My daughter likes “babies” at 60%, but last segments of tail don't move much then. My usual settings are .12 layer height, 2 walls, 20% infill, scaled down 60%. &nbsp;FILESAxolotl_V2_6_Curled.stl - Thicker model, curled to fit on small beds, or scaling up.Axolotl_V2_3_Curled_Flat.stl - Closer to original, flatter modelAxolotl_V2_6_Straight.stl - Thick model, Straight, and spaced. Best for scaling down.Axolotl_V2_3_Straight_Flat_.stl - My daughters favorite, good for scaling down Axolotl_V2beta_Curled_Painted.3mf - Painted version of the thick, curled, but the head is slightly more narrow than the others. &nbsp;LICENSING: I cannot provide a license for this model, as all parts used to make it are non-commercial. I attempted to reach out to the owners of those models, but one of them has very strict licensing policy. So, none of us can make money from it, but we can all enjoy it free!Original posting can be found here: <a target="_blank" href="https://www.thingiverse.com/thing:5383489" rel="nofollow noopener">Articulated Axolotl Enhanced by AKinferno - Thingiverse</a>. This is still one of my favorite prints.&nbsp;V2 Update Details:I never had an issue with this model, but others have, so I made lots of changes to the model to make it easier to print. If you have trouble, let me know. I ensured the base was flat Previously, the fingers and parts of the gills had small, tiny spots on the bed. They are all connected now. The overhang under the jaw was a very steep angle. Now, the base of the head is almost flat, with very little overhang. Tried not to sacrifice cuteness, so the smile is still there, but more subtle. If anyone wants the old head on the new model, that can be done, just ask.Used a higher resolution model for the head and the body. Removed a finger from the front hands and smoothed it out, since axolotl's are only supposed to have 4 fingers on their front hand. I tested pointing the fingers, but it wasn't as cute. I painted one of my last revisions to test with my ERCF. It is included as well. I will paint other models once the kinks are resolved. I am planning for a V3. Blender practice and have a few ideas I want to test. Feedback is appreciated. Shout out to McGuybeer for making and sharing excellent models and Schlossbauers detailed axolotl model.&nbsp;HISTORY6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously. The new version 2.7 is posted to fix this issue. --------------------------------Since the 2.2 change, I loved the smoother head, but I thought the head on the thicker model has looked a bit too bullet shaped. The flat model proportions looked better, but I liked the thicker body. So, I finally updated it. 2.6 has a slightly flatter head, scaled up to match the height of the thicker model. It looks much better now, IMO.With the experimental models, I started trying to improve visibility of the smile. Joker was the first attempt. I raised the edges of the smile, puffed up the cheeks around the smile and the eyebrow ridges. Had kids pick the best variant, printed it, and it looked like the Joker. Smiling, but something sinister behind it. Worth keeping, but not what I was going for. My younger thought it was scary. So, restarted with Smiley. Instead of moving the smile edge up toward the eye, I moved it deeper and up. I fluffed and pushed the cheeks up so it does reshape the eye slightly, but left the eyebrow ridges alone. I would appreciate feedback. I think Smiley is my favorite version. He has a normal and wide model. I cleaned up and narrowed behind the gills, then realized I had inadvertantly widened the face. I had to revert to the older rear setup to narrow it. So kept both versions. He is currently just on the thick model, but I will add it to the flat model if the feedback is positive. And does the rear make a difference in print? I printed the wide one and think it looks good, would like opinions, my kids votes are split.4/15/2023 - V2.6. Edited the head on thick model, added a couple experimental models with exaggerated facial expressions (Smiley and Joker). 3/8/2023 - V2.5 of thick body and 2.3 of flat body print great! All issues are resolved. The thick body had trouble with arm strength and mobility. I significantly remodeled the shoulder and hip pieces of the body to provide more clearance for the arms and legs to move. I was careful not to reduce the size of the base, so adhesion won't suffer. I spent a bit of time on the head also. I deepened the crease around the eye, and the mouth, so the eyes and the smile stand out a little more. I improved the base of the right gill, so there is more contact near the head.Test print is twinkling blue in the model photos. Be aware, at 60%, the last link of tail doesn't move. Arms still do. But that is what my daughter likes. Think this is the last needed change. I will also provide multicolor versions of each model this weekend. Happy Printing!3/7/2023 - Test print was successful, but flexibility is limited. There shouldn't be an issue with the flat models, as they use the original body. Stretching the body made things fragile. So look for v2.5 of the thick body this evening with more space clearance for arms to move. Also, the smile fades at 70% scale, so I will increase depth of it for all models. Cuteness must be preserved :p3/6/2023 - V2_4 - Updated the ‘straight’ model to strengthen the arms and legs. The ring attached to the shoulders is twice as thick as it was before. I did a quick/dirty edit of the rear legs too to achieve the same result. I stacked the 100% part with the 150% part. You will see them if you separate the model. I will fix this properly later, but this should ensure anyone printing now, won't have fragile limbs. I will update the other 3 versions tomorrow and should have the painted version of this model by this weekend.3/4/2023 - V2_3 - Fixed a problem with the head being lower than the rest of the body.3/3/2023 - V2.2 - Smoothed out the head. Now it looks like the rest of the body.V2.0 Changes (2/20/2023):<ul><li>Articulating arms</li><li>Easier to print (Lots of changes to head to improve this)</li><li>Higher resolution model</li><li>More accurate hands (Real axolotls have 4 fingers up front, 5 in the rear)</li><li>Painted for multi-material / multi-color printing</li></ul>6/12/2022: - Added a curled version, at the request of someone in comments, for smaller print beds. Or if you want to increase the size to 230% on a 220x220 bed, now you can!

Articulated Axolotl - V2.7 (Original maker)

Articulated

OVERTURE Filament

This lil' guy can be printed as separate pieces (support free) or as a single body 👻🎃 Paint in your slicer, or paint with acrylics!&nbsp;Printed in Orange, White, Black and Green <a target="_blank" href="https://www.amazon.com/OVERTURE-Filament-Cardboard-Dimensional-Accuracy/dp/B0991ZKTWM?th=1" rel="nofollow noopener">Overture Matte PLA</a>&nbsp;Happy Printing!Overture

Ghost Pumpkin 

Halloween

补补觉去

对原作进行了加长，同时对一些细节进行了修改更便于无支撑打印，不需要金属件。如有需要可以底板涂点胶水。&nbsp;The original work has been lengthened, and some details have been modified to make it easier to print without support.No metal parts required.If necessary, apply some glue to the plate.&nbsp;&nbsp;2024/3/19:增加了一款刀片，根据微技术Microtech刀型制作。可以直接替换原刀片。刀尖尖锐，请注意安全。A blade has been added, made according to Microtech knife type. Can directly replace the original blade.The tip of the knife is sharp, please pay attention to safety.&nbsp;2024/3/31:很多人想要短款的。我重新上传了75cm的版本。Many people want short styles. I re-uploaded the 75cm version.&nbsp;2024/4/7:我制作了一个梳子版本。I made a comb version.&nbsp;重新制作了带系绳孔的刀柄，并修复了非流形错误。Reworked the hilt with lanyard holes and fixed non-manifold bugs.&nbsp;加大了一点刀钮尺寸，放在源文件里的pin set V2.stl，如果还是太松可以用点胶水。Increase the size of pin set and put it in the ‘pin set V2.stl’ in the source file. If it is still too loose, you can use some glue.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-03-20_cc777c7f008d7.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/825887/2024-04-07_83168edc957f7.jpg"></figure>

Longer Tiktok Gravity knife( Various styles )长款萝卜刀

Toys

w3r3wolv3s

UPDATE 5/27/24 - Added profile with a nail opening on the back.&nbsp;The Jurassic Park logo as a dimensional mosaic wall hanging. Four colors.&nbsp;I printed this with Polymaker PLA Pro Metallic.&nbsp;Note: I wanted them as big as possible, so yes (depending on sliver version and printer) they may print over the initial filament trace. It won&#39;t hurt anything, but you can always scale yours down a little and reposition, or add a pause and remove the initial trace.

Jurassic Park Dimensional Mosaic

Dinosaurs

3D Prints This Week

Load black and white into the ams.&nbsp;If you like the way it comes out, give me a boost, feel free to drop a tip in the link below, or a 5 star review always helps too.&nbsp;https://www.buymeacoffee.com/3dprintsth3

Mickey Minnie Mouse Coaster / Disney / Coffee

Disney

visualplastik

Remixed to not require supports on the star wheel. Follow original video instructions to assemble. Depending on the print sometimes a small drill of the holes for the filament insertion to widen is needed or some super glue to further secure it. But using filament as a bolt was a genius design decision. &nbsp;<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=hKHbJqq8P1s&embeds_referring_euri=https%3A%2F%2Fwww.printables.com%2F&source_ve_path=MjM4NTE&feature=emb_title"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/hKHbJqq8P1s" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Rubber Band Gun Remix 

projectiles

EEEEEE

This project is the culmination of 100+ hours of remodeling and printing. &nbsp;There was no miniature handheld glider that could be printed and thrown straight all in less than a half hour, which I wanted to change&nbsp;The main features of the glider are its unparalleled accuracy and consistently, allowing a skilled used to soar the plane 30 feet before it lowers by even an inch. &nbsp; Pitch Stability     Yaw Stability     Ease Of Use     Consistency      Durability       Airtime           ★★★★★          ★★★★★         ★★★★         ★★★★★          ★★★        ★★★★★&nbsp;This was printed on the Bambu P1P and printed in 23 minutes(17 minutes of actual printing) with white PLA basic. It used just under 10 grams of filament.Instructions-Print in PLA at 100% infill with no brim or raft. Wait for the hotbed to cooldown before gently using a scraper tool to remove the glider.<figure class="image image_resized" style="width:31.52%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000083624/design/2023-12-05_h3ph93i1hm0i.jpeg"></figure>Bend the tail segments up 90 degrees.<figure class="image image_resized" style="width:31.52%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000083624/design/2023-12-05_rtzdaumbtly8.jpeg"></figure>Bend the elevators down about 25 degrees, and flip over the plane.<figure class="image image_resized" style="width:30.98%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000083624/design/2023-12-05_ll74i2pc6mdz.jpeg"></figure>Hold the glider from between the main and tail wings, and throw lightly. The tail segments should be facing downwards when thrown, and the elevators should be facing up. If the plane seems to lean to one side, try to throw the plane with more power.The design fits on most build plates if positioned diagonally, but if it doesn&#39;t fit, print Left Simple Indoor Glider V2 and Right Simple Indoor Glider V2 separately and glue them together with hot glue or a 3d pen. Tape or rubberbands could also work.You can reverse the tail wings if you want the plane to look better and land more smoothly at the cost of slightly worse performance. Just make sure the weight on the front of the plane is facing downwards to increase stability.

Simple Indoor Glider V2

flight

Geek Genius Collective

Evee OctopusIn the file there are 2 plates.Plate #1 is without color.Plate #2 is color filled. You have the option of printing Eevee with glare in her eye or without the glare, then personally adding it yourself with White acrylic painting afterwards. Smallest test print was at 70%.Happy Printing!

Eevee Octopus

Pokemon

Maleko

<h2>The Nozzle Wiper V3.1</h2>I have designed this new nozzle wiper for my 4 X1C. The original wiper isn&#39;t effective and when I got my A1 I saw how great the A1 wiper was so I decided to adapt an A1 wiper to my X1C.This is the third version, fixing each problem version by version. This solution cost me less than $1 and now my nozzle is always clean, which reduces defects on my prints.&nbsp;I have tested this wiper for over 80 hours of printing without any problems, I printed mine with Bambulab PC as I use a lot of high end filament that requires an active heat chamber.&nbsp;The A1 wiper is available in the official Bambulab store at an affordable price.<h3>⚠️ Use a material that can handle the heat, like at least PETG.</h3><h3>⚠️ Use my print profile marked as designer to make sure you are using the latest version of this model.</h3><h3>INSTALLATION:</h3><ol><li>Remove the screw holding the original wiper - Using the larger allen key.</li><li>Cut an A1 silicone wiper, counting to get 4 rows, and install it on top of the new wiper, I recommend removing the double sided tape and using CA glue.</li><li>Remove one or both of the purge chute screws located at the top of it - Using the smaller allen key.</li><li>Insert the part, the back first and press the front to fit into the purge chute and screw the 2 screws back into place.</li></ol><h3>UPDATES:</h3>3.1: 2024-04-26 Latest 🎉<ul><li>Added more clearance (0.5mm) to the build plate due to a problem with the non-Bambulab plate touching the wipers.</li></ul>3.0:  2024-04-20<ul><li>With the previous version, people had problems with mounting due to differences between printers and filament calibration. The print is now fixed with one or two screws from the purge chute. This makes it more stable on the purge chute.</li><li>I changed some of the structural parts of this new version to make it stiffer and less prone to deformation when the chamber heats up.</li><li>This new release fixes a purge issue after the first layer inspection (X1C) where the toolhead would purge on top of the wiper.</li><li>I had a problem with the screw holding the original wiper, the screw didn&#39;t provide enough support, so I decided to design a new way of holding the wiper.</li></ul><h3>BENEFITS:</h3><ul><li>No Brims</li><li>Designed for FDM Printing</li><li>Smooth Operation</li><li>Clean nozzle</li><li>Tight Fit</li><li>Hold by screw</li><li>No additional part needed</li></ul>

The Nozzle Wiper V3.1 - X/P Series

user_2544666658

Model ported from thingiverse, adding here to include print profiles and layouts

Otrio Game

Games

Nakozen

A wee Gingerbread House to sit on your desk or shelf, or loop a thread through the included holes in the roof to hang from a tree, or elsewhere! Designed to be printed with a pause-at-height colour swap! Though I'm sure you could just paint the details after printing with just one colour! EDIT: New V2 files for a tighter fit, a seamless folding roof! =================== Included is a Frameless variant for those uninterested in the sprue card format (refer to photos for assembly help). If the fit is too tight, I suggest setting outer walls to print first in your slicer. You can make it EVEN TIGHTER by increasing the Z-scale by 15%.Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Makes greatly appreciated, always glad to see them! Happy Printing!===================<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them, however licenses are available via Ko-Fi and Printables Clubs!If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships, or Printables Clubs!

Gingerbread House Kit Card

Christmas

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014267/design/2023-09-19_1c59e405d0a79.png"></figure>This is a V-twin engine model that consists of various parts like a crankshaft, connecting rods, camshafts, gears, and a throttle valve, among others. It can replicate the functioning of a real engine. The engine model has magnetic decorative covers and hollowed-out structures that make it easy to observe the internal parts. It can be rotated using either a manual crank or an electric motor. In manual mode, the engine runs at a slow pace, allowing for a better observation of each movement. With the motor drive mode, the engine can run continuously by using the motor to rotate the crankshaft.&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended especially in moving parts<a target="_blank" href="https://store.bambulab.com/products/pla-basic-filament?variant=40820833517683" rel="nofollow noopener">https://store.bambulab.com/products/pla-basic-filament</a>Hardware Kit: Engine Model Components Kit-005<a target="_blank" href="http://store.bambulab.com/products/engine-model-components-kit-005" rel="nofollow noopener">http://store.bambulab.com/products/engine-model-components-kit-005</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/wv3qnfMbuko"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/wv3qnfMbuko" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Engine Model 005

Models

3D Print Bros

V2 of the Gyro Fidget Spinner is here! Please use the print profile for best results. Bambu Labs Basic PLA gives me the best results, but most PLAs should work just fine. My prints got spinning right away, but if your rings don&#39;t spin freely, first try breaking it in a little. If it doesn&#39;t break in within a few minutes, re-print it with reduced flow ratio or perform flow calibration. Results will vary depending on filament used.&nbsp;Improvements include:<ul><li>Relocated Z seams</li><li>Optimized tolerances</li><li>Longer spin times</li><li>Quieter smoother spinning</li><li>Faster print time</li></ul><a target="_blank" href="https://cults3d.com/en/3d-model/game/gyro-fidget-spinner-v2" rel="nofollow noopener">Commercial selling license now available!!</a>&nbsp;Check out the JUMBO version <a target="_blank" href="https://makerworld.com/en/models/393051#profileId-294200" rel="nofollow noopener">here</a>! Or if you&#39;re more a miniature person, I have you covered with the <a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro</a>.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000245471/design/2024-04-19_89ff840145366.gif"><figcaption><a target="_blank" href="https://makerworld.com/en/models/393051#profileId-294200" rel="nofollow noopener">JUMBO Gyro</a></figcaption></figure><figure class="image image_resized" style="width:43.04%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000245471/design/2024-04-19_4d5bdcba3287d.gif"><figcaption><a target="_blank" href="https://makerworld.com/en/models/435704#profileId-340795" rel="nofollow noopener">Micro Gyro</a></figcaption></figure>&nbsp;

Gyro Fidget Spinner V2

fidget

Biglui

Huge brick Flower

LEGO

Michele MM3D

T-Rex 2 Hueforge&nbsp;Here you can find all my HueForge creations. <a target="_blank" href="https://makerworld.com/en/@MicheleMM3D/collections/503504" rel="nofollow noopener">https://makerworld.com/en/@MicheleMM3D/collections/503504</a>&nbsp;&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Beige At layer #15 (1.28mm) swap to Jade White for the rest.

T-Rex 2 Hueforge 

camillabertrand

Middle finger illusion card. No support needed

Middle finger - Illusion card

random

Jamburgg

A simple chicken with a crochet / knitted look!&nbsp;The photos show the model at its default scale with a height of 80mm. The crochet pattern is likely to not show well if it is scaled down smaller than this, however I haven&#39;t tested it. You may want to experiment with a smaller scale and layer height.&nbsp;If you like the crochet style models, check out my baby duck! <a target="_blank" href="https://makerworld.com/en/models/404101#profileId-305771" rel="nofollow noopener">https://makerworld.com/en/models/404101#profileId-305771</a>&nbsp;Print Guide:Prints in one piece and can be painted either by hand or in the slicer if you have an AMS. I have included a single colour print profile as well as a painted -multi-colour print profile.&nbsp;The multi-colour version has 5 colours so there are two approaches you can take:<ol><li>Change the cheek colour (pink) to match the body (brown) and have the cheeks be the same colour as the body. You can either leave it like this or manually paint them.</li><li>It is possible to change out rolls in the AMS if they aren&#39;t being used anymore. Therefore I would set the colour of the comb (red part) to yellow and once the beak has finished printing, swap out the yellow roll for a red roll of filament.</li></ol>&nbsp;Walls/Perimeters: Any. Purely decorative so doesn&#39;t need any strength.Infill: Any. Same as above.Supports: NoneLayer Height: ≤ 0.2mm. Model was printed at 0.2mm layer height. A smaller layer height would give more detailMaterial: Any. PLA used here but any can be used

Crochet/ Knitted Chicken

Wife

Mici

Based on DUMMY 13 Beta - Oct. 2023 <figure class="table"><table><tbody><tr><td><a target="_blank" href="https://www.printables.com/model/593185-dummy-13-printable-jointed-figure-beta-files" rel="nofollow noopener">DUMMY 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0</a></td></tr></tbody></table></figure>DUMMY 13 is ideal for posing. However, not only are the hips/shoulders difficult to print and have to fit perfectly with the other pieces, but I also had to keep trying to straighten the unintentionally twisted arms and legs.&nbsp;So I joined the pieces together.This makes printing much easier and the poses of DUMMY 13 are now a little more anatomically correct.&nbsp;Of course, some mobility is lost in the process, but in most cases it is still sufficient.I mostly use these parts for my outfits from my "<a target="_blank" href="https://makerworld.com/en/u/2185604356/collections/561808" rel="nofollow noopener">COMIC CON</a>" collection, which I put on the shelf.&nbsp;They are probably rather unsuitable for models that you want to play with or create complex poses with.

DUMMY 13 - Minor anatomical correction, no twisting

Dummy 13

GTPerrault

Slide on grips for CI lockpicks to add some texture without taking away pick feedback.

Covert Instruments Lockpick Grip

lockpicking

mcmaven

This Print Profile includes all the components you need to upgrade your AMS to use loose (silica gel) desiccant. And the additional Dry Pods allow the AMS to hold more desiccant, which will mean longer times between refreshes.&nbsp;This has been done before, in many different combinations, but I couldn&#39;t find one that met all my needs. I feel that this remix contains the best combination of AMS Dry Pod and Desiccant Containers that are currently available, and I added a Funnel to help load them with silica.  There are 3 parts included that can hold the hygrometer, only print one: 1) a Shallow Hole version with slots for the hygrometers with 30 degree tabs that can hold more desiccant, 2) a Shallow Hole version with slots for the hygrometers with vertical tabs that can hold more desiccant, and 3) a Thru Hole version with 30 degree slots for the hygrometer tabs, designed by FLAP_design, where the hole for the hygrometer goes all the way through the pod. This version holds desiccant in the Dry Pod, but it can generate a more accurate reading because it will be measuring the overall AMS humidity, rather than the humidity of the desiccant in the Dry Pod with the hygrometer, i.e., the readout is less likely to be be distorted by the silica close to the reader.&nbsp;Just drag your preferred option onto the build plate.  The Round Hygrometer can be found here: <a target="_blank" href="https://www.amazon.ca/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLQMR97" rel="nofollow noopener">https://www.amazon.ca/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07BLQMR97</a>&nbsp;The Desiccant Containers can be loaded with generic desiccant and dropped into the slots in the back of the AMS. The top of the Desiccant Containers is split into two parts. The lower part should be glued on, and the upper snapped in after desiccant is added. They are easy to remove and replace the desiccant in.&nbsp;I used this desiccant: <a target="_blank" href="https://www.amazon.com/gp/product/B07QRRHJV3" rel="nofollow noopener">https://www.amazon.com/gp/product/B07QRRHJV3</a>&nbsp;To refresh the desiccant; pour it into a glass tray, place in the microwave for 2 minutes. Let it cool, then pour it back into the Dry Boxes. DO NOT put the Dry Boxes in the microwave! The desiccant gets VERY hot and will melt the Dry Boxes.&nbsp;Note that the Dry Pods will also work with the Hydra spool tray.Or if you are using the factory Bambu AMS spool tray then after inserting the Desiccant Containers, the original AMS dessicant covers can be snapped on top of them.&nbsp;With fresh desiccant, the humidity was down to 10% after a couple of hours, and it has stayed there for over 2 months now.&nbsp;24/4/7Added Pod for round hygrometers with vertical tabs.&nbsp;24/06/13V3.3 version adds an extension to the Funnel that allows it to cover Wide Dry Pods so desiccant is not lost when filling them. The same Funnel works also with Narrow Dry Pods.&nbsp;

AMS Dry Pods Wide, Narrow, Hygro, Trays, & Funnel

Mario3D

Make yourself, the kids or a friend happy for Easter with this cute Easter Bunny.Give power to your imagination and play with colors.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/610906/2024-02-24_4c139a7b0b036.jpg">I decided to make a thin color line for a more cheerful effect.  <ul><li>You don't need an AMC to do this, just use pause to change the color where needed.</li><li>Before starting the print, make sure the plate is well cleaned for excellent adhesion.</li><li>Use only calibrated filaments as too loose a fit can result, but this rarely happens with cheap filaments.</li><li>When the print is finished peel off carefully without twisting the card, or to be sure, wait for it to cool completely.</li></ul>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/610906/2024-02-24_c7d018e11155a.jpg">Use your favorite cutters to separate the puzzle pieces, being careful to cut accurately (not like me :D)&nbsp;Layer Color Change:<img src="https://makerworld.bblmw.com/makerworld/draft/610906/2024-03-01_1a1f27604d17e.png">For No AMS printers - use Add Pause;For AMS printers - use Change Filament;---If you like my work, give me a like and follow for more models.or<a target="_blank" href="https://www.buymeacoffee.com/mario3d" rel="nofollow noopener">Buy me a coffee!</a>If you want to use this model for commercial purposes, feel free to write me to get a license.&nbsp;Happy 3D Printing!

Easter Bunny Card Kit

Easter

Willi 3D

Create your own battle droid army and take over the galaxy!&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD remix of my B1 battle droid. I changed the design in many places to make it easier to assemble and allow the figure to stand and pose on its own. Check out the compatible <a target="_blank" href="https://makerworld.com/de/models/13746?profileId=13457" rel="nofollow noopener">STAP speeder bike</a>!Scale 1:9 (90% for 1:10)&nbsp;Improvements:- improved connection points- easier to assemble- improved stand and pose of the figure- Blaster *pio* *pio*- kit cardsMay the force be with you!Roger roger!&nbsp;Update:(21/08/23) <ul><li>optimized base</li></ul>(03/08/23) <ul><li>optimized size for smaller printer and better to print fingers</li><li>addet base and insert to chest </li></ul>(26/07/23) <ul><li>optimized fit of head, thin, pipe, backpack and blaster</li><li>addet thumb to forarm, hole for blaster in backpack</li></ul>(13/07/23) <ul><li>optimized fit of ankle and blaster</li></ul>&nbsp;Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly: The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult.It is better to rotate the knee and elbow joints than to push them into place.In order to replicate the design of the B1 battle droid as closely as possible, I was forced to make some parts very fragile. Please be ready to reprint parts in case of breakage. Separate parts are located in the respective folders.