B.Buckitt Creations

duck.knapp

I&#39;ve wanted to build an insert press for a long time. then I looked for something that I didn&#39;t have to buy extra parts for and was &#34;good enough&#34;, but again I didn&#39;t find anything...&nbsp;&nbsp;so I developed my own press. You can print everything except 6x 608 zz ball bearings which you have to press in.&nbsp;&nbsp;For assembly you need: - First the 6 bearings are pressed in - join your arms - arms to the headpiece - arms with headpiece to the base&nbsp;&nbsp;It is important to ensure that everything is printed very precisely and does not wobble too much. It&#39;s better to be slightly too tight and grease it than to be too loose. The pins for tapping in should be tested beforehand. They are designed so that they have to be shuttered, but the material should not split apart.&nbsp;It&#39;s not an easy print but I think it&#39;s cool XD&nbsp;Material: PETG, ABS, Nylon or so&nbsp;btw: In the pictures you can see the old arms, now they are different lengthsand as always if you think of something that I can change/improve, please let me know

Heat Set Insert Press (99% 3D-Printed)

tools

Demonio

Rainwater catcher printed from PETG.Output is 70mm. Join sticks should be exchanged with screws, +20 mm length Printable on A1 mini … bottom part (rainwater gather v2 - spodek v2) rotate 45 degree on X axis

Rainwater catcher 110mm

rain water collection

alexjrwilliams

Dickhead of the year award - you are hereby recognized as being a massive dick&nbsp;Recommended to print v2. updated to make text more legible. 4 color AMS required

Dickhead Coin

gifts

CH682

Pflanzschild - Garden Sign&nbsp;Diverse Kräuter, Obst- und Gemüsesorten – several herbs, fruits and vegetablesÜbersicht in den Fotos - List is in the picturesFalls etwas fehlt schreibt mir einfach - if something is missing just contact me&nbsp;Drei Versionen – three versions:Vorgefertigte Schilder (nach Alphabet sortiert) – prepared signs (sort by ABC)Leerschild (kann mit wasserfestem Stift nach eignen Wünschen beschriftet werden) – empty sign (text you need can be written on with water resistant pen)Eigener Text in Bambulab – own text in Bambulab&nbsp;Kein Support notwendig – support is not necessaryInlay und Basis können zusammengeklebt werden – inlay and base fit togehter with glue&nbsp;In X- und Y-skalierbar – scalable in x- und y-direction

Pflanzschild - Garden Sign Herbs, Fruit, Vegetable

gardening

kerngebiet

<h3>Description</h3>System for the magnetic connection of machines and fans with 150mm / 6 inch hoses. Can be used e.g. for laser cutters, soldering stations, welding work, vacuum cleaners, shop vacs or planers.All connections and adapters are held together magnetically and are secured by guides to prevent accidental unscrewing. In addition, a TPU gasket is placed on all the fixed connection points to provide a better seal against dust and side air.I personally use the system on my OMTech Co2 Laser with a big <a href="https://amzn.to/49dfgkk" rel="nofollow">AC Infinity 6" inline Fan</a>*, what works pretty well so far. I also designed an adapter to modify the OMTech Turbo 70W Laser. This may only fit this specific Laser but maybe useful for others to change and reuse it.&nbsp;<h3>Magnets</h3>Normal superglue and two types of magnets are required for assembly. I have made several attempts to find the best combination of magnets without the connection being too tight or too loose. Therefore two different types are needed:<ul><li>In all fixed parts, 10x5mm magnets with a force of about 2.2 - 3.5kg. <a href="https://amzn.to/3Uu81jO" rel="nofollow">Example.</a> *</li><li>In all moving parts 10x2.5mm magnets are used. <a href="https://amzn.to/3SMT9vD" rel="nofollow">Example.</a> *</li></ul>Each adapter takes six magnets. All models have been designed so that the magnets cannot touch each other. There is a gap of about 0.2mm between the magnets. This helps to prevent damage to the magnets and also compensates for any unevenness.&nbsp;<h3>Assembly</h3>For assembly, the magnets are simply glued into the holes. The wall pass-trough and the connection for the OMTech laser must also be glued together. The hoses are attached to the adapter with hose clamps.The TPU Gasket is simply pressed into the models and holds without glue.There is also a Template included in the model files, with which all holes for wall mount and wall pass-through can be easily made. <h3>Printing</h3>All files are very easy to print. Supports are required for some parts, e.g. for the wall mount with rear gasket or the holes for the magnets. Only the cover really needs a lot of supports. This is best printed with the outside facing upwards and then supported on the inside.I have printed all models in PETG. The gasket is printed in soft TPU. The best way to do this is with the surface on a smooth printing plate, so that it lies nice and flat later on.&nbsp;* = Amazon Affiliate Links

Magnetic duct connection System for 150mm / 6 inch Hoses

duct/hose/piping

legacyofbob

The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being able to see how much filament is left on your spool, having passthrough holes for respooling, and more places to stick the loose end of your filament. &nbsp;The original locking mechanism is unchanged, and these will work interchangeably with the original version if you only want to do one side or something. The lock tab is still there for accepting the Bambu Lab refills and the original shims work as well if you want the extra locking power. &nbsp;I would recommend you print this in something that can withstand a dehydrator. I used ASA.&nbsp;I printed in 0.2mm layers without supports, with a light glue coating on the bed for ASA.

Bambu Reusable Spool Hex Remix

Bambu parts and accessories 

JamesThePrinter

** Get an early start! Get the <a target="_blank" href="https://makerworld.com/en/models/41177" rel="nofollow noopener">Christmas version</a> now! **&nbsp;&nbsp;Light up different Halloween scenes in this display. A tea light candle is required. The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The top 2 layers should be black</li><li>If there is no moon in the scene, all other layers can be white or clear - both look nice</li><li>If there is a moon in the scene, it will look best if the bottom 2 layers are printed in clear filament<ul><li>All other layers should be white</li><li>All non-black layers could be printed in all white or all clear if one isn't available to you</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_njhnxlluv3as.png"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_ps9jc73zrxio.png"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_zosx4sj7pb0v.png"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_t3jeg8v9f9hv.png"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li></ul>