printed great, I used the mirror feature for the far right version.

I printed with PETG and it was a little too loose. adjusted my settings to 99.50% ratio and it fit well.

helped to print a little slower, used a box cutter to fully unlock the articulating feature

Beefy setup, printed perfect!

printed perfect

Made it for a new key bowl.

Name side to print plate gave me a little trouble, could have been user error. Opted for name up + supports & iron finish.

worked to connect bambu smoke filter to ac exhaust vent. 3” portion could be a little longer. was hard to connect to but otherwise good print.

printed well

first time printing with a .8 hotend. printed in under 2hrs.

Ran out of pink at the end and switched to a blue/pink ombré. Kids still loved it. works well.

printed at 100% infill, feels good

works well, looks nice

Makes for a GREAT cigar ash tray!

Pretty sure I’m the only one who’s printed this in PA12-CF10 so far.

very clean, works well

Did 6, made a few variations of my own that I added to the print profiles.

it works

Printed two versions, both 100% infill. PETG version broke on me, PPA-CF Core did not break.

Works well