Aurel 14

Picture_it

A quick to print coaster. Pre-coloured for you, simple to print from your phone. If you want to change the colours or size, import using your computer. Click objects, then click on the object and choose the colour number to assign from your ams. They are also easy to paint in the slicer. I'm including face down for assorted finishes, or face up with grooves to catch condensation. I have the settings for face down on high temp plate because that's how printing on my pey sheet works best for me. Make sure to change to textured pei, if that's what you are using.

Deathstarbucks coaster

Star Wars

Shinjy01

Simple base in the shape of a Road Crossroad, for classic bricks. The dimensions are 231x231mm, optimized for the Bambu Lab plate. Have fun creating lots of streets for your cities, and rush to download the other street models. TIPS FOR PRESSING being a print that takes up the entire plate: - clean and degrease it well before printing. - Turn off the side auxiliary fan - PEI Texture plate recommended - First layer ALL at 50mm speed (not just the perimeters at 50 and the filling at 100, but the entire first layer at 50 speed) - Increase the width of the first layer to 0.55 to increase adhesion to the plate - the tolerances are very tight, and as you can see the bricks stick well in my print, but just 0.1mm of difference more or less and the bricks could be too loose or not fit together (it is normal to have small differences between the various printers and among the various brands of filaments). If this happens, you have to use the K flux, or the rim tolerances, to obtain the desired mounting resistance.

brick base plate "Road Crossroad"

GARAGE

Muskoka Research

<div><h1>Summary</h1><div>This is a clamp-on vise with interchangeable TPU pads and a 5" operating range. 100% 3D PRINTABLEAdditional Parts: 3x Retaining Clip.stl 2x Guide Rod A.stl 2x Grip.stlAssembly (See Pictures):<ol><li>Adhere Frame Base Pad TPU to Frame.</li><li>Install Grip TPU to Frame and Vise via dovetail slots.</li><li>Partially thread in Mounting Bolt.</li><li>Thread Mount Plate TPU onto Mounting Bolt.</li><li>Mount the vise to a benchtop to complete the following steps.</li><li>Feed both guide rods through the Frame and Vise.</li><li>Attach one Retaining Clip to the grooved sections at the base of each guide rod.</li><li>Install Threaded Rod all the way through the Frame and Vise.</li><li>Attach the final Retaining Clip to the end of the Threaded Rod.</li></ol></div><h1>Print Settings</h1>Printer Brand: <div>Creality</div> <pre><code> Printer: <div>Ender 3</div></code></pre> Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Resolution: <div>0.2</div> <pre><code> Infill: <div>20</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=Duramic+PLA%2B+%2F+TPU" target="_blank" rel="nofollow noopener"> Duramic PLA+ / TPU </a><pre><code> Grey/Black</code></pre></div>

Clamp-On Vise - Fully 3D Printable

TOOLS

NPeter

A simple esp32 based clock module. This clock connects to the internet via WIFI and synchronizes with NTP. Before the first use, set the time zone and WIFI access in the main.cpp file. You won't need to set the time anymore; it will always be accurate.&nbsp;BOM:<ul><li>ESP32 module</li><li>4x8x8 (or 3x8x8) led matrix </li><li>USB charger/power supply</li></ul>ESP32 firmware source code: <a target="_blank" href="https://github.com/Pethical/ESPClock" rel="nofollow noopener">https://github.com/Pethical/ESPClock</a>

Simple Esp32 clock with NTP

CLOCK

emmaginn

Wall Mounted Diamond Design Bowl Planter with Hidden Drip Tray. I was asked if I could add a hidden drip tray to the bowl design planters like some of my other ones so came up with this. Resize as needed. Hope you like it!&nbsp;Commercial Licensing: <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreons</a> also have the opportunity to use commercial licenses for their own creative projects, adding versatility and potential income streams.&nbsp;If you like this, please be sure to check out my <a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Patreon</a> where I upload many of my designs exclusively for members. Hope you like them!&nbsp;<figure class="image image_resized" style="width: 58.75%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186708/design/2024-06-04_ca8fd50862ce2.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Alba Planter with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 59.62%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186708/design/2024-06-04_b0428e6109878.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Bamboo Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 57.27%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186708/design/2024-05-06_43c269eba0e6.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Stacker Planter/Vase with Hidden Drip Tray</a>&nbsp;<figure class="image image_resized" style="width: 58.89%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186708/design/2024-05-02_c4986346dbaf9.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Rivers Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 58.58%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186708/design/2024-05-02_ac819f1c0e73c.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Slice Planter with Hidden Drip Tray</a> <figure class="image image_resized" style="width: 55.7%"><a href="https://www.patreon.com/emmaginn" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000186708/design/2024-05-02_351443b9c636b.jpg"></a></figure><a target="_blank" href="https://www.patreon.com/emmaginn" rel="nofollow noopener">Ripple Propagation Planter with Stand</a>

Diamond Bowl Wall Planter with Hidden Drip Tray

PLANTES

dakjones82

If you're a cat person then you get it! Add some character to your holiday decorations this year.

Kitty Cat Christmas Door Decoration

CHRISTMAS

LordBoos

Inquisitor (Filament Painting) - HueForge<h4>Printing instructions:</h4>Filament swaps ONLY, no MMU or AMS required, but AMS makes it much easier.Use Original HueForge profile to get the intended look, my models are very sensitive to print settings because of color blending between layers. Every setting and filament changes for AMS are carefully prepared and fine-tuned in the Original HueForge print profile, feel free to change colors, but I recommend not to adjust other settings. If you want to experiment with your own settings or non-original print profiles, for best look print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mm.You can use same filaments as I did, or you can experiment with your own.Don't forget to upload a make!<h4>Filaments Used:</h4><ul><li>PLA BambuLab Basic Black Transmission Distance: 0.6</li><li>PLA BambuLab Basic Blue Gray Transmission Distance: 3</li><li>PLA BambuLab Basic Beige Transmission Distance: 8</li><li>PLA BambuLab Basic Jade White Transmission Distance: 4</li></ul><h4>Swap Instructions:</h4><ul><li>Start with Black</li><li>At layer #5 (0.4mm) swap to Blue Gray</li><li>At layer #13 (0.72mm) swap to Beige</li><li>At layer #41 (1.84mm) swap to Jade White for the rest.</li></ul>

Inquisitor (Filament Painting) - HueForge

FILAMENT PAINTING

Black Glovz

Halloween Lego Head Pack&nbsp;Instructions:1 x Head 1 1 x Head 2 1 x Head 3 3 x Cap&nbsp;Please use led candle light and not a normal one as you will burn down your house.

HALLOWEEN PUMPKIN LEGO HEAD PACK LED CANDLE LIGHT LAMP

HALLOWEEN

DonMatis

Customize your Halloween wall clocks! Pick your preferred front and back themes, and decide if you'd like unique minute/hour pointers to create your personalized timepiece.&nbsp;Need an additional clock mechanism, i've used <a target="_blank" href="https://www.amazon.co.uk/dp/B08B8X1FN5?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">this one from Amazon</a>&nbsp;<h3>Print Instructions</h3>For a hassle-free print, use my available profiles. One has the clock's back piece and hour/minute pointers, while the other offers three front hueforge themes. Simply download and select what you'd like to print.<h4>Back Piece</h4>You can choose between two, one with regular numbers and the second with Halloween symbols.Both pieces require, 0.20mm profile with arachne mode for the numbers and optionally ironing on the top surfaces&nbsp;Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Orange </li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #26 (5.20mm) swap to Orange</li></ul><h4>Hour/Minute Pointers</h4>These are designed to work with the specific clock mechanism i used. It might not work for you but it is a quick and easy print to test them out. Just use Classic on the slicer with 0.20mm.&nbsp;<h4>Front Themes (Hueforge)</h4>Here there are 3 different themes that you can choose from. Each one has different layer changes. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Theme 1<figure class="image image_resized image-style-side" style="width:27.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_4ac20afa3d39b.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #10 (0.88mm) swap to Blue Gray</li><li>At layer #14 (1.2mm) swap to Orange</li><li>At layer #24 (2mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 2<figure class="image image_resized image-style-side" style="width:26.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_8c77c280b0ff2.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #12 (1.04mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;Theme 3<figure class="image image_resized image-style-side" style="width:26.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/72573/2023-10-07_ad333fd492355.jpg"></figure>Filaments Used:<ul><li>PLA Overture Black</li><li>PLA BambuLab Basic Blue Gray</li><li>PLA BambuLab Basic Orange</li><li>PLA Overture Light Yellow</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #9 (0.8mm) swap to Blue Gray</li><li>At layer #11 (0.96mm) swap to Orange</li><li>At layer #23 (1.92mm) swap to Light Yellow for the rest.</li></ul>&nbsp;<blockquote>Enjoy my work? Support me by joining my club on printables.com. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>

Halloween Wall Clocks [multiple options]

martin.taichl

This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable Air Bridge - the same as on the Roci, only shorter. It also comes with its own stand. I recommend to watch the folloving video for easier assembly. <figure class="media"><div data-oembed-url="https://youtu.be/aZs08p-ZCKo"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/aZs08p-ZCKo" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Morrigan Class from the Expanse

EXPANSE

JamesThePrinter

** Get an early start! Get the <a target="_blank" href="https://makerworld.com/en/models/41177" rel="nofollow noopener">Christmas version</a> now! **&nbsp;&nbsp;Light up different Halloween scenes in this display. A tea light candle is required. The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out my other holiday models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/23941" rel="nofollow noopener">here</a>.<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The top 2 layers should be black</li><li>If there is no moon in the scene, all other layers can be white or clear - both look nice</li><li>If there is a moon in the scene, it will look best if the bottom 2 layers are printed in clear filament<ul><li>All other layers should be white</li><li>All non-black layers could be printed in all white or all clear if one isn't available to you</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_njhnxlluv3as.png"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_ps9jc73zrxio.png"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_zosx4sj7pb0v.png"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/90743/2023-09-14_t3jeg8v9f9hv.png"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li></ul>

Halloween Tea Light Display

LAMPS

Additive Atom

<a target="_blank" href="https://shop.thehueforge.com/collections/hueforge?aff=3" rel="nofollow noopener">HueForge</a> Fire Dragon created for the <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303687737?aff=507" rel="nofollow noopener">Polymaker Fire Color Set</a>. Only manual filament swaps required.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments used <a target="_blank" href="https://us.polymaker.com/products/hueforge-packs?variant=41308303687737?aff=507" rel="nofollow noopener">Polymaker Fire Color Set</a>:<ul><li><a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">Polymaker PolyTerra PLA Charcoal Black Transmission Distance: 0.3</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345875513?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Red Transmission Distance: 1.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345744441?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Orange Transmission Distance: 7.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478360121?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA Lemon Yellow Transmission Distance: 6.5</a></li><li><a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">Polymaker PolyLite PLA White Transmission Distance: 5</a></li></ul>Swap Instructions:<ul><li>Start with <a target="_blank" href="https://us.polymaker.com/products/polyterra-pla?variant=39574351282233?aff=507" rel="nofollow noopener">PolyTerra Charcoal Black</a></li><li>At layer #9 (0.8mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345875513?aff=507" rel="nofollow noopener">PolyLite Red</a></li><li>At layer #12 (1.04mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345744441?aff=507" rel="nofollow noopener">PolyLite Orange</a></li><li>At layer #21 (1.76mm) swap to <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=40603478360121?aff=507" rel="nofollow noopener">PolyLite Lemon Yellow</a></li><li>At layer #31 (2.56mm) swap <a target="_blank" href="https://us.polymaker.com/products/polylite-pla?variant=39574345941049?aff=507" rel="nofollow noopener">PolyLite White</a> for the rest.</li></ul>