Arthur

Dr Operator

UPDATE 2/15/24: The <a target="_blank" href="https://makerworld.com/en/models/183898#profileId-202793" rel="nofollow noopener">BLT upgrade</a> for Sliced Bread is now available.<figure class="image image_resized" style="width:30.88%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-15_c758983e6e179.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;This is my first upload to MakerWorld, I hope I have everything uploaded properly. Having recently bought an A1 with the AMS, I decided to update one of my Transformer designs. Sliced Bread is an update/remix of my <a target="_blank" href="https://www.printables.com/model/399650-transformers-ham-and-cheese" rel="nofollow noopener">Ham and Cheese</a> design. I've updated the shoulder and hips joints, changed the logo to a Docobot logo as well as changing the overall design to require either a multi colour printer or painting skills.&nbsp;An assembly guide is on the way. The design uses eight 5mm x 3mm magnets that are completely optional. They just help it keep it's shape when in bread mode.&nbsp;Also pictured is my Transformer design <a target="_blank" href="https://www.printables.com/model/423293-transformers-a-toaster-named-crumbs" rel="nofollow noopener">A toaster named Crumbs</a> which Sliced Bread is designed to fit into. If you'd like to check out my other Transformer designs, you can find them all on my <a target="_blank" href="https://www.printables.com/@DrOperator/models" rel="nofollow noopener">Printables profile</a> Docobots (Dock-Oh-bots) are a faction of former Autobots and Decepticons who have no interest in fighting a never ending war and just want to live in peace. On the run from both the Autobots and Decepticons, they turn to their namesake Dr. Operator to help alter their transformed state from the usual Car/Plane/vehicle into everyday objects to help them avoid detection. ASSEMBLY GUIDE <figure class="image image_resized" style="width:56.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_fcdc191da6f5b.png"></figure>&nbsp;Assembly isn't too difficult and should only take a couple minutes. There is no hardware necessary for assembly but there is the option to use eight 5mm x 3mm magnets to help keep it's form while in bread mode. First off, you will need two Pins and one Leg, Thigh and Joint as seen below. <figure class="image image_resized" style="width:43.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_d38cab2ca554b8.png"></figure>&nbsp;Take the Joint, slide it into the Thigh and insert the Pin. Then take the Thigh, insert it into the Leg and insert the Pin. Repeat the steps for the second Leg and put them off to the side for a moment. <figure class="image image_resized" style="width:93.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_58b2b46deb8fc.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Next, you will need one Joint, Arm 1, Arm 2 and Hand. <figure class="image image_resized" style="width:38.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_2f76f4b41e26b8.png"></figure> Place the Hand and Joint into Arm 2 and then attach Arm 1 as seen below. Repeat the steps for the second arm and then set them aside. <figure class="image image_resized" style="width:89.16%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_07617c09de6198.png"></figure>&nbsp;&nbsp;&nbsp;Next, we're going to attach the legs and head to the chest. You'll need Chest 1, Chest 2, Head and the two assembled legs.<figure class="image image_resized" style="width:61.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_dfe2a4c3b7e4d.png"></figure>&nbsp;&nbsp;Place the legs and head onto the tracks on Chest 2 and then attach Chest 1 as seen below. I would suggest using a drop of glue on each of the three pegs on Chest 2 before attaching Chest 1. The fit is snug enough already, but I used glue on mine to increase durability. <figure class="image image_resized" style="width:87.59%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_46860bd6a92358.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Grab the two completed arms and the last two pins.<figure class="image image_resized" style="width:54.96%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_9114f38a1e2de8.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Attach the arms to the body using the pins and we're just about done. <figure class="image image_resized" style="width:82.72%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_6863dd847f63b.png"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Last thing to do is attach Head 2 using the Head Pin and you're good to go.&nbsp;<figure class="image image_resized" style="width:88.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/557704/2024-02-02_62c5ac6b0b0298.png"></figure>&nbsp;&nbsp;

G1 Docobot: Sliced Bread

玩具

ysk1025

<h2>First of all</h2>This model is created based on the wonderful idea from the following link. I pay my respects.Spinning top mold 陀螺模具 by 潦草小狗爱吃雪糕<a target="_blank" href="https://makerworld.com/en/models/437241" rel="nofollow noopener">https://makerworld.com/en/models/437241</a>&nbsp;<h2>Related models are available!</h2><figure class="image image_resized" style="width: 46.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-04_075683aa86343.webp"></figure><a target="_blank" href="https://makerworld.com/en/models/481189" rel="nofollow noopener">https://makerworld.com/en/models/481189</a>  <figure class="image image_resized" style="width: 487.675px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-04_65faf2abbdd7.jpg"></figure><a target="_blank" href="https://makerworld.com/en/models/473846" rel="nofollow noopener">https://makerworld.com/en/models/473846</a><h2>[New Information]</h2>For those who are concerned about layer lines, try printing with the mold tilted at a 45-degree angle.This can eliminate the steps on the top surface. Give it a try!<figure class="image image_resized" style="width: 59.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-12_008abeb3180f5.jpg"></figure><figure class="image image_resized" style="width: 60.19%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-12_afc5de07de3ac.jpg"></figure><h2>What is this ?</h2>This PoopKeyCap is designed to repurpose purge material (Poop) and support material generated by 3D printers into keycaps.The mold is printed with PETG, and the stem, made with a 0.2mm nozzle, is embedded into the heated and kneaded PLA through insert molding.<h2>How to use</h2><h3>Print</h3>Please print the mold with PETG, using at least 6 wall layers and at least 5 top layers.If you are using Bambu Studio, select the 0.2mm Strength setting.<figure class="image image_resized" style="width: 60.1%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_aea9507b52a53.jpg"></figure>Please print the stem with PLA using a 0.2mm nozzle.It was difficult to achieve a good fit for the key switch with a 0.4mm nozzle. However, it&#39;s not impossible with a 0.4mm nozzle, so feel free to give it a try.<figure class="image image_resized" style="width: 60.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_724039fa03d9e.jpg"></figure>Insert the printed stem into the male mold. Insert it in the direction where the chamfered edges align.<figure class="image image_resized" style="width: 59.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_b4c62105a738f.png"></figure><figure class="image image_resized" style="width: 60.1%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_744d59bc2f0e5.jpg"></figure><h3>Applying a release agent</h3>Please apply a release agent to female mold.<figure class="image image_resized" style="width: 26.73%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_289f7ecb51da3.jpg"></figure><figure class="image image_resized" style="width: 59.87%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_917bd212cb11a.jpg"></figure>Wipe off any excess release agent.<figure class="image image_resized" style="width: 60.12%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_ca2aa0533e117.jpg"></figure>Use the wiped paper to apply the release agent to the male mold and other parts.(Do not apply to stem.)<figure class="image image_resized" style="width: 60%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_e802623b3ffe1.jpg"></figure><h3>Weighing out Poops</h3>You need 3.5g Poops. (in case of PLA)<figure class="image image_resized" style="width: 60.88%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_0f195d27ee7de.jpg"></figure><h3>Heating PLA</h3>Heat the PLA to around 230°C using a soldering hot plate or an oven.Using a cup-shaped silicone mold is convenient.If you use a hot plate, covering it with aluminum foil will help it melt faster.<figure class="image image_resized" style="width: 60.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_df16745da3294.jpg"></figure><figure class="image image_resized" style="width: 60.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_52f25f0db8108.jpg"></figure>For quicker melting and to achieve a nice marbled pattern, it is also recommended to flatten the PLA with a spatula.<h3>Compression molding</h3>Form the melted PLA into a sphere inside the silicone mold.Once it has cooled slightly, you can also form it into a sphere using leather gloves.The important thing at this stage is to ensure it is thoroughly shaped into a sphere to remove any air bubbles.<figure class="image image_resized" style="width: 60.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_5360190b44e94.jpg"></figure><figure class="image image_resized" style="width: 60.06%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_91f811e740bf6.jpg"></figure><figure class="image image_resized" style="width: 60.04%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_3cbdcc53ae78f.jpg"></figure>Once the PLA is in the mold, compress it using the mold. Hand pressure is sufficient.Using a vise or similar tool can cause the mold to adhere too tightly, making it difficult to remove keycap and potentially damaging the mold.<figure class="image image_resized" style="width: 59.71%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_795b555b67db5.jpg"></figure><h3>Demolding</h3>Once the mold has cooled sufficiently, demold the keycap.Using a utility knife can make it easier to remove, but be careful to avoid injury.<figure class="image image_resized" style="width: 60.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_cec68fac1a045.jpg"></figure>If it&#39;s difficult to demold with a utility knife, there are demolding protrusions that you can grip with pliers and pull to remove.<figure class="image image_resized" style="width: 59.75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_4f13fc7ff34eb.jpg"></figure><h3>Finishing</h3>Wipe off the release agent and remove any burrs using nippers or a file.It is also a good idea to sand the entire surface to remove any layer lines.Using thin-blade nippers for plastic models is recommended as they can cleanly cut off burrs.<figure class="image image_resized" style="width: 59.79%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_958f930c3d485.jpg"></figure><figure class="image image_resized" style="width: 60%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_f100f4948cb64.jpg"></figure><h2>Enjoy!</h2><figure class="image image_resized" style="width: 60.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_068ad0b2432a9.jpg"></figure><figure class="image image_resized" style="width: 60.01%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_1b046c6067acd.jpg"></figure><figure class="image image_resized" style="width: 60.17%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000480992/design/2024-06-01_f4dd8be6799d8.jpg"></figure>

PoopKeyCap Ver.Artisan

冲刷料再利用

布什戈门

用来测试打印配置公差的模型，仅需16g材料，建议改变打印配置或启用新耗材的时候打印一份。&nbsp;测试插销为一头圆形一头方形，分别测试不同形状的装配间隙。&nbsp;测试内容包括： 1、正方形孔洞间隙测试。2、圆形孔洞间隙测试。3、与M4螺丝的配合（基准直径4mm）。4、与M4螺母的配合（基准六边形内接圆直径7mm）。5、从0到0.7mm的接缝测试，最小接缝可从板侧面的刻度条读数。  A model for testing printing tolerance configurations, requiring only 16g of material. It is recommended to print a copy when changing printing configurations or using new materials.The test pin has a round shape on one end and a square shape on the other end, testing the assembly gaps for different shapes.&nbsp;The test includes:<ol><li>quare hole gap test.</li><li>Round hole gap test.</li><li>Fit with M4 screws (reference diameter 4mm).</li><li>Fit with M4 nuts (reference hexagon inscribed circle diameter 7mm).</li><li>Seam test from 0 to 0.7mm, with the minimum seam readable from the scale bar on the side of the board.</li></ol>

装配公差测试 16g材料小而全 Tolerence tests

工具

Ga Design

Your requests have been heard. This is the new Wide BambuLab poop chute with magnet holes for Multiprint. Magnet diam 6mm x h 2mm.  This model has been optimized for large-volume poop production i.e. multicolor prints. This new version is a wider on the back

玩具

冲刷料再利用

工具

打印机附件

生活工具