I love this little container. It’s usually dry where I live, but as temps rise and the furnace shuts off, humidity is creeping up—so these are becoming essential. The print was easy and works great. I did tweak it slightly by reducing both circumference and height by about 5 mm. Thankfully, the designer left enough shoulder at the top that I could keep the thread size the same, so the cap and hygrometer still fit. My goal was to allow some airflow inside a Bambu spool hub. Without some space around the container, the vacuum bag seals both top and bottom, closing off airflow and making the desiccant ineffective. You can see in my pics that now there’s space around the container inside the hub, and the bag no longer seals tight against the bottom. It spans the hub hole instead, leaving room for airflow and allowing the desiccant to actually do its job. Fantastic design—easy print—I love it.