Aptimex

lastwaun

Standard deck of cards (52 cards) plus two jokers. This also includes a case for the cards that needs to be folded into the box shape. The cards are plenty flexible and can eaily be shuffled and they bridge well! I found the textured PEI sheet to give a nice feel in the hands and keeps cards from sticking to eachother. I found PLA to work just fine for the cards - plenty flexible and per ususal easy to work with. The cards also shuffle extremely well and even bridge! I first tried the box as PLA but it quickly broke after too many bends of the lid so I made it out of PETG next time and so far it's held up just fine.&nbsp;The 0.2mm nozzle allowed for fine detail and thin layers. In my testing I found that having 2 layers of the color was just right - not going to peak through but also enoough to be plenty visible so I used 0.06mm layer height.I also found that slowing down the first layer and starting with black ensured good first layers.&nbsp;<a target="_blank" href="https://imgur.com/gallery/A5i34lz" rel="nofollow noopener">Here is a video</a> of the cards being shuffled.&nbsp;&nbsp;

Waterproof Playing Cards

Games

K2_Kevin

Other sizes (4x3, 4x5, 4x6) available here: <a target="_blank" href="https://makerworld.com/en/models/201205#profileId-221569" rel="nofollow noopener">https://makerworld.com/en/models/201205#profileId-221569</a>&nbsp;Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;&nbsp;PRINT SETTINGS:<ul><li>Layer Height: 0.2mm</li><li>Supports on drawers only: RECOMMENDED (Tree Supports on front lip ONLY)</li><li>Build Plate: I recommend using GLUE / Nano Polymer to prevent warping!</li></ul>&nbsp;What&#39;s changed &amp; reimagined?<ul><li>Added drawer stops!!! Don&#39;t accidentally spill your screws.</li><li>Added alignment space for easy stack-ability</li><li>Added large magnet top</li><li>Smooth sided version so they sit close together without gaps.</li><li>28 Drawer slots</li><li>Included my own and original no scoop drawers</li><li>Compatible with all original drawers.</li><li>6x3 magnets with glue. Glue in hole(s), then use another magnet on top to slide/drop them in place.</li></ul>Video of the ScrewUnit in action! <a target="_blank" href="https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067" rel="nofollow noopener">https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067</a>&nbsp;&nbsp;Reimagined design of Modbots organizer.ModBots Original: <a target="_blank" href="https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915" rel="nofollow noopener">https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915</a>

ScrewU-nit Hardware Organizer Storage

Office

Jorge Rui

After the release of the final version of the <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>, which breaks away from the original bamboo lab model&#39;s aesthetics as well as my previous designs, I&#39;m excited to introduce a more refined model featuring generative design. Though this version is merely inspired by automatic generation techniques, it allows for precise control of wall angles, reducing the need for extensive supports. Like the base &#34;Ergo Mouse&#34; model, this version doesn&#39;t require a flat base for printing. However, I recommend using <a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">standard or galaxy PLA</a>; Matte PLA tends to have more challenging supports to remove, which can leave marks on the piece. I hope you like it :)&nbsp;Affiliated links for Bambu Lab Material if you want to help a little:<ul><li><a target="_blank" href="https://shrsl.com/4k6e8" rel="nofollow noopener">Galaxy PLA</a></li><li>PLA CF</li><li><a target="_blank" href="https://shrsl.com/4ctbi" rel="nofollow noopener">Normal PLA</a></li></ul>and part of the success on getting the mouse without that flat bottom, and almost without any support scars is the use of Gold PEI build plate, this plate, don&#39;t know why, has a stronger grip when compared to the black one, and they have it for all printers.<ul><li><a target="_blank" href="https://shrsl.com/4jqpm" rel="nofollow noopener">Gold PEI Plate</a> </li></ul>&nbsp;You can get more information on the parent project <a target="_blank" href="https://makerworld.com/en/models/469851#profileId-385684" rel="nofollow noopener">Ergo Mouse</a>,Like the parent project, this mouse uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 49.48%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-30_36c3c434cfc4d.png"></figure><h2><a target="_blank" href="https://youtu.be/9TkudRs2iG8" rel="nofollow noopener">Video do assemble the Bambu Lab Wireless Mouse kit with this “skin”</a></h2><blockquote>A Message to you:Hello! I trust everyone is in good spirits.  I&#39;m contacting you because I&#39;m encountered increasing difficulties displaying my work on Facebook and, more so, on Reddit. Although I&#39;m utilizing this platform and others, I&#39;m seeking alternative methods to show my work.  A <a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">community member</a> (<a target="_blank" href="https://makerworld.com/en/@Kardes.Design" rel="nofollow noopener">Kardes.Design</a>) suggested an abominations called &#34;TikTok&#34;, which I admit I&#39;ve previously attempted with limited success.  Nevertheless, I&#39;m willing to try again to share my development journey and updates. For TikTok users, you can find me at: <a href="www.tiktok.com/@designrepcom" rel="nofollow">www.tiktok.com/@designrepcom</a>.  Your support in sharing would be greatly valued. <a target="_blank" href="https://www.tiktok.com/@designrepcom/video/7375077366575516961?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7374868727643145761" rel="nofollow noopener">And here a tiny clip for this project</a></blockquote><h2> </h2><h2>Context</h2>This mouse has been constructed in a completely different manner from previous versions, with a particular focus on functional and ergonomic aspects. Think of it as a study rather than the final product. Nevertheless, I have decided to release it for those interested in experimenting. What to expect:<ul><li>Optimal comfort level for a hand size within the 90th percentile, which includes most adult male hands.</li><li>Perfect button actuation. Given the button layout in this kit, as well as the limitations imposed by 3D printing, this will be the most suitable key configuration and should work with most printing configurations.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_ad7df10e8eacf.png"><figcaption>A little bit of the design process - Prototype creation (2th iteration on the make)</figcaption></figure><ul><li>I have included a version with specific material for support. Especially for those with an AMS system, this is one of the materials that should always be loaded.<ul><li>It is true that it is somewhat expensive, but if used only on the interface layer, this material will allow for many prints, as only a small amount is used on the contact zone. The advantage is an almost perfect interface zone. Bambu Lab currently offers &#34;<a target="_blank" href="https://shrsl.com/4ctb1" rel="nofollow noopener">Support for PLA</a>,&#34; which is a relatively elastic material with very low adhesion to the piece&#39;s walls. <a target="_blank" href="https://shrsl.com/4jh25" rel="nofollow noopener">PVA</a>, which is water-soluble, can also be used and allows for even superior results. Both are excellent options. The downside is that the printing will take much longer to complete, and the purging effect will consume some of the precious support material.</li></ul></li></ul><blockquote>You can also try using PETG as a support material. Since the melting temperatures of the two materials are similar, they are incompatible (they don&#39;t &#34;fuse&#34; together), which is beneficial for support structures. However, PVA or the specific support material allows for superior results, and in terms of configurations, everything is automated in Bambu Studio.</blockquote>&nbsp;This uses the <a target="_blank" href="https://shrsl.com/4cpnv" rel="nofollow noopener">wireless mouse kit from bambu lab</a><figure class="image image_resized" style="width: 326.094px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-25_94087291ff26c.png"></figure>&nbsp;This was the 1st study, so I will not be making the usual render images this time. Instead, I will share the print to show how clean it comes out. Still available to print, see instruction on the bottom (Ergo Mouse I1.3mf). <figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_8cd86a130ffdf.png"></figure></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_de1638e12ebd6.png"></figure></td></tr></tbody></table></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000479899/design/2024-05-20_111ea882c522d.png"></figure><blockquote>And since these things don&#39;t come out of nowhere, there is a whole development process needed to make everything go smoothly. Contrary to popular belief, it’s not enough to just know how to use a 3D modeling tool and slicing software; these are just tools in an industrial design process, which is itself part of product design. And you know what? It&#39;s something everyone should try. Simply printing pieces that others have made is just one part of the experience, a small part, not bad, but only a fraction of the experience, if you like to print you should try create something.So, I invite everyone to give it a try. Start by taking the first step: create a simple model using the CAD tool of your choice, or make a clay sculpture, or a model of what you want (I often start with these). What matters is to begin. You already have one thing mastered: printing. Now, just take one more step to become a creator.Jorge Rui</blockquote>&nbsp;

Ergo Mouse - Snake edition

Electronics

Mr.Rod

NEW! STL Models added with improved strength and ease of installation (You can find them inside STL Folder of this project, “OEM ALL in ONE Stronger and Improved Main Structure V2” and “OEM ALL in ONE Improved Front Plate V2”&nbsp;Remember any ideas or job offers at <a href="mailto:rodams42@outlook.com" rel="nofollow">rodams42@outlook.com</a> :). Now let´s get to these.&nbsp;INDEX:1- Multipurpouse device description.2- All the possibilities available with this device (Build Plates Descriptions).3- Installing Manual.<ol><li>MULTIPURPOSE DEVICE DESCRIPTION:</li></ol>So this is the device i came up for the Bambu Lab Car Interior Design contest. At first i knew that making a phone support device for the car was about to be one of the most demanded and uploaded things on this contest, so instead of uploading a smartphone support for a single purpose which by the way is something that is already done by lot of people I thought about making an universal multipurpose phone support so it can be used in every single car and with every single smartphone out there, so it wasn´t just about creating a multipurpose hitches so the ALL in ONE phone support can be used and adapted to every single thinkable part inside any car out there, there´s even more, we need to think that there´s a lot of smartphones out there each one with it´s own size and with it´s own shape, so this is something also that needed to be thinked about when it comes to the design of the ALL in ONE support.&nbsp;So again, this is not a revolutionary idea and in my oppinion let´s be fair, to me this is not a winning 3D model (cause this is not something revolutionary in my opinion) but this contest can give a good promotion to this project, a project that it´s still not ended for a reason i´ll explain later. So, the best thing about this is that i´ve shared the STL model of the hitch used in all the supports shown in this project, this is mainly for one reason, even though i tried to create the most combinations i could think of for these phone support, as i said previously there´s a whole jungle of possibilities when it comes to how different each single car can be compared to the rest. So i can guess that some of the supports that i´ve providen inside this project won´t be the best solution for some cars , so that´s why this is an “open” project (which is something that i didn´t allowed in some of my previous uploaded projects in MakerWorld, but this time there´s a good reason) so the idea here is that everyone can add his own adaptations and creations using the provided hitch.&nbsp;So when it comes to features of this phone support we can find that there are no bolts or extension springs needed for the top handler, all the force needed to support the phone and keep it inside the structure is just a pair of helical spring coils which by the way are entirely made by the own printer with plastic, so no components needed to be buyed. Appart from that nothing special can be said about this phone support except that once everything is mounted this is a plug and play device.&nbsp;Some reccomendations. I´ve printed this device with PLA just for showcasing purposes, but remember if this device is about to be used for long periods of time and your car constantly sleeps on the street and get´s exposed to high temperatures it´s highly reccomended to print everything with BambuLab ASA or ABS filaments mainly or other filaments that use this material.&nbsp;Also. I haven´t just providen an STL for the hitch, also provided STL file for the front cover of the ALL in ONE Product and also for the Zip Ties so mabe some out there want to make Zip Ties longer or even shorter, also there´s an STL file with the squared mount hitch and rotational axis so mabe some of you want to make the rotational cylinder bigger so the phone mabe don´t wobbles from left ot right when hard driving :)&nbsp;2. ALL THE POSSIBILITIES AVAILABLE WITH THIS DEVICE:&nbsp;So when talking about the whole range of possibilites available with this device it´s not just with the supports for the car but also with the own ALL in ONE design. So let´s divide this into 2 parts, car possibilities and ALL in ONE custom parts and possibilities:&nbsp;ALL in ONE Parts possibilities inside Build Plates:So inside the 3MF File you can find 4 Build Plates, the plate called “ALL in One Main Files” (no description needed here i think… but who knows…) contains the BASE setup to build ALL in ONE, this setup is based on an XL top handle and an XL Helical spring coils, this setup is reccomended for biggest size phones, if you want to add more strength to the handle or you want it to be shorter (in length) then go to the second build plate called “All in One Exclusive Customer Shop” here you can get shorter top handles, shorter coil springs (to apply more force or get less travel).&nbsp;ALL in ONE Car Parts / Supports possibilites inside Build Plates:These point is related with 2 Build Plates, the one´s called “All in One Individual Supports Shop” and “All in One Exclusive Customer Shop”Inside the first one you´ll find all the needed supports or at least the one´s you´re interested in. Into the second one you´ll find also all the custom made Zip Ties for the Squared Shape Base. Inside 3rd point we´ll take a look how to install all the supports if they need to.&nbsp;3. INSTALLING MANUAL:- 3.1 Installing ALL in ONE- 3.2 Installing ALL in ONE Horizontal “U” Shaped Hitches (Vertical ones don´t need installation)- 3.3 Installing ALL in ONE Special Squared Mount and Inserting Custom Zip Ties (&#34;U&#34; Shaped and Double Sided)- 3.4 Installing ALL in ONE Custom Portable Case- 3.5 Installing all supports Male Hitch inside ALL in ONE Female Hitch&nbsp;&nbsp;3.1 INSTALLING ALL IN ONE MAIN STRUCTURE:&nbsp;STEP 1: Install into main frame 2 helicoidal spring coils remember to press both until they get all the way in like shown in photo 4.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_93ccfd38dc84.png">&nbsp;STEP 2: Install top handle bar, leave it on it´s own rails and pass both helicoidal spring resort hitches located at the end of both through top handle small space located at the end.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_519526f4dfcd1.png">&nbsp;STEP 3: Place the front plate, remember logo facing out, and all the hitches from the frame (10 in total) should be over the front plate.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_7ea4b54ec90ac.png">&nbsp;3.2 INSTALLING ALL IN ONE HORIZONTAL “U” SHAPED HITCHES:&nbsp;STEP 1: Like in the photos the longer part from the male hitch looks inside the “U” Shaped Hitch<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_b16e5e2d488d3.png"></figure>&nbsp;3.3 INSTALLING ALL IN ONE SPECIAL SQUARED MOUNT AND INSERTING ALL CUSTOM ZIP TIES:&nbsp;STEP 1: Insert bottom support bar/shaft into bottom space like shown in photos. (Twist and rotate al little just to make installing easier)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_e3197612f347c.png">&nbsp;STEP 2: Install next piece shown in photos by makin the same twist and rotate against the female hole made into the squared mount, remember to be gentle or it can get damaged.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_9b88aaaca5596.png"></figure>&nbsp;STEP 3: Install finally the male hitch with the male rotation axis, just slide it in it should go in easily.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_89c2a7f925f3.png">&nbsp;STEP 4: Slide in desired Zip Ties, only important thing is to pull in with the dents looking up like shown in the photos. To release them just pull up the leavers located over the zip ties in the front face of the squared mount.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_b1df0c83209b.png">&nbsp;3.4 INSTALLING ALL IN ONE PORTABLE CASE:&nbsp;STEP 1: Just slide in the central axis shaft from the top part of the case (the one where the “ALL in ONE” Logo is located, then rotate and twist again like in previous parts, it should go in without making that much force. Also remember to check the final lock hitch works properly.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_77f4e0e517a89.png"></figure>&nbsp;3.5 INSTALLING ALL SUPPORTS MALE HITCH INSIDE ALL IN ONE MAIN FEMALE HITCH&nbsp;STEP 1: First slide the long hithc plate from the bottom of the male hitch inside the female bottom space of the ALL in ONE once it slides completely in the exert some press to finally lock the top hitch of the male hitch inside the top space located on the rear face of the ALL in ONE Main structure, to take off the hitch repeat both steps going backwards (first remove top hitch, which you gonna feel it´s so hard so pull out gently and finally once it´s out slide out bottom long hitch from the main structure, and repeat as many times you need)<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000426900/design/2024-04-13_33749511aa09.png">&nbsp;&nbsp;So that´s all folks for today, as i always said in previous project´s hope you like it and hope you give it some love :) see ya on the comments!

ALL in ONE Universal Multipurpose Phone Support

Cars

Ritz.Prints.3D

<h2>Update June 25 </h2>*fixed the code issue causing unexpected divider creation when choosing to have no X divider in the generated model<h2> </h2><h2>Pegboard Tray Design</h2>Author: Aden Ritz aka Ritz Printz 3DThis OpenSCAD script allows you to create customizable trays for pegboards. You can adjust the tray&#39;s dimensions, wall thickness, divider configuration, and peg options to suit your specific needs.<h3>Features</h3><ul><li>Customizable Tray Dimensions: Adjust the depth, width, and height of the tray.</li><li>Adjustable Wall Thickness: Set the thickness of the tray walls.</li><li>Configurable Dividers: Add vertical and/or horizontal dividers to organize the tray&#39;s interior.</li><li>Peg Options: Customize the size and spacing of pegs for pegboard compatibility.</li><li>Angled Front Opening: An optional angled front opening for easy access to the tray contents.</li></ul><h3>Notes</h3><ul><li>Ensure the tray dimensions and wall thickness are appropriate for your printer&#39;s build volume and material capabilities.</li><li>The angled front opening can be customized or removed as needed.</li><li>Use the script&#39;s flexibility to create trays tailored to your specific storage and organization needs.</li></ul>

Customizable Peg Board Tray

Pegboard

MakerVerse Designs

<h3>Fully 3d printed slide shoes, inspired by adilettes</h3><ul><li>printed with TPU (I used Bambu Labs TPU 95A HF, but I suggest using a softer filament)</li></ul>Important notes:<ul><li>It is for EU shoe size number 43 (male), but you can scale them to your size (use uniform scaling)</li></ul><img class="image_resized" style="width: 59.62%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000488792/design/2024-06-08_c42631354d275.png"><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support (It works very well, especially with printers where the bed is not moved so much, such as P1S, P1P X1,…)</li><li>Or use another not so sticky bed and print it standing up with support (recommended for A1 or similar printers)</li></ol><img class="image_resized" style="width: 58.39%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000488792/design/2024-06-08_76346ecb50f49.png">&nbsp;Check out my other models, for example the fully printed crocs shoes: <a target="_blank" href="https://makerworld.com/en/models/425034#profileId-328514" rel="nofollow noopener">https://makerworld.com/en/models/425034#profileId-328514</a>&nbsp;Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Slide Shoes (Adilette) - Fully 3d-printed

Fashion

mikelb0013

Edit #2Added 3-Way connectors both Female and Male ends (currently only available on the 200mm frames, please comment if you&#39;d like this feature on the smaller frames)&nbsp;How to Build a 3x3 Grid and Beyond<ul><li>Image #1 3x2 Grid</li><li>Image #2 3x3 Grid</li></ul><ol><li>With the addition of the Female and Male 3-way connectors, adding extra frames can be as simple as added one Female (yellow) and one Male (green) 3-way connector (see Image #1) or more complex as a 3x3 (Image #2)<ol><li>All additions can be done by rotating, feel free to rotate in Bambu Studio to match up accordingly<ol><li>instructions for a 3x3 below Image #1</li></ol></li></ol></li></ol><figure class="image image_resized" style="width: 71.4%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000217207/design/2024-06-02_a636718975a54.png"><figcaption>Image #1 2x3</figcaption></figure>To create a 3x3 (Image #2) do the following (using the Male &amp; Female Profile):<ul><li>Print 4 female 3-way Connectors</li><li>Print 2 2Way Connectors</li><li>Print 2 2way Connectors-Flipped</li><li>Print 1 3way-Middle Male Connector</li></ul><ol><li>Start by connecting the Top Row with 1 2way Connector, Female Connector and Flipped Connector.<ol><li>Note: some middle connectors will not connect with every keyslot on their frame, which is fine!</li></ol></li><li>Add the second row with 2 female connectors and the middle male connector<ol><li>Note: you will need to slot your hueforge image in the Middle Male connector at this time<ol><li>middle frames will have their access to the image blocked on larger grids and will need to be disassembled in order to be removed.  One reason this set up is great with no glue and stable</li></ol></li></ol></li><li>Lastly, connect your last 2way connector, female connector and Flipped Connector.<ol><li>Note: again, you will need to slot your hueforge image in the Middle female connector at this time<ol><li>all outer edge hueforge (minus the middle bottom) will be accessible to add or remove images as you feel free</li><li>when building bigger grids, be sure to note if you need female or male connectors and their orientations, followed by adding the corresponding corner. </li></ol></li></ol></li></ol>If you need a Female Corner connector instead of a 2way Connector, print a Female Connector.  All female connectors/keyslots can not be seen from the Front view and work for ALL edges!<figure class="image image_resized" style="width: 70.06%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000217207/design/2024-06-02_8a0e5766be608.png"><figcaption>Image #2 3x3</figcaption></figure>Edit #1<ul><li>added Frame only profile, no connectors or slots</li></ul>200mm Interlocking Frames<ul><li>If you print the Top Left (TLNoS) or Bottom Left (BRNoS) no key slots protrude out and can be used as single use.</li><li>Top Row picture slots come from the top down. Bottom Row Slots come from the left or right<ul><li>Pictures can be taken out and replaced at all times, nothing is blocked</li><li>Can hold up to 3mm Thick Lithos or hueforge</li></ul></li></ul>Be sure that hueforge print dimensions* are set to 200 x 200 to fit this frame&nbsp;*Do NOT change the dimensions of the Frames, they are set with specific tolerances and any adjustment large or small will effect how they slot together&nbsp;Hueforge files created by @3Deekes <a target="_blank" href="https://makerworld.com/en/u/527314672" rel="nofollow noopener">https://makerworld.com/en/u/527314672</a>&nbsp;190mm Interlocking frame can be found <a target="_blank" href="https://makerworld.com/en/models/196749#profileId-217259" rel="nofollow noopener">https://makerworld.com/en/models/196749#profileId-217259</a>180mm Interlocking frame can be found <a target="_blank" href="https://makerworld.com/en/models/226156#profileId-243905" rel="nofollow noopener">https://makerworld.com/en/models/226156#profileId-243905</a>&nbsp;

200mm Hueforge Interlocking Frame: No Glue

2D Art

fay3dlab

Im currently upgrading most of my suspended models to include channel to install led strips in them.. So for the suspended star destroyer V2.. since its already in 2 parts.. i added a channel path so you can install a LED strips around the outer frame.. and i put small holes in the inner frame so that the lights from the LED shines through to the ship..&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/516767/2024-01-01_27386ae7989a8.gif"></figure>&nbsp;If you're interested in getting the LED strips.. here's my affiliate link to buy it.. 5V USB RGB LED Strip Light https://s.click.aliexpress.com/e/_oEk0hDa &nbsp;The ship itself is modelled by nikoli2803 from thingerverse.. the circular frame is the imperial logo itself.. the whole frame i modelled it to look like the deathstar.. everything was done using Tinkercad..&nbsp;The ship itself comes in 2 parts.. front and back.. and there are 3 clips to hold both side of the ship together.. the bottom clip will be the stand for the whole suspended star destroyer and the 2 clips works on any side..Its a bit tricky to assemble since you cant put both parts of the ship down since its suspended on the strings..<ul><li>so my suggestion is to put the bottom clip down on a table and then put the 2 parts into the clip..</li><li>it should fit snuggly together..</li><li>once the frame can stand on its own.. you can put the other 2 clips onto the frame..</li></ul>When printing suspended models.. one important thing to remember is to set the wall generator to arachne from classic.. this will make the slicer print the strings..&nbsp;I hope you guys have fun printing this new version of the suspended imperial star destroyer..

Suspended Star Destroyer V2 LED strips

Suspended

davima

&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Dark Red At layer #10 (0.88mm) swap to yellow At layer #16 (1.36mm) swap to White for the rest.

Space launcher ukiyo-e art style - Hue Forge

Gifts

emincan.ipekci

simple remix without support printed 3 layers 3 walls each %80 infill works perfect with two sided tape on walls..

Simple cable clip holder wall mount no drill

Utility

Arasaka.inc

The blade has a channel for 3.2mm neon wire and the handle has channel for power supply wire to connect it to the invertor.The neon wire has more uniform glow than the led strip. &nbsp;&nbsp;UPD: Added forgotten parts

Cyberpunk 2077 thermal katana

Swords

RJ Design

The Design&nbsp;Here we here a Vortex made from Suspended filament. This looks great and shows off the capabilities of your Printer.&nbsp;After a couple of people have had bed adhesion issues, I&#39;ve added an updated Version with a thicker rim, which can be found here: &nbsp;<a target="_blank" href="https://makerworld.com/en/models/475325#profileId-386079" rel="nofollow noopener">https://makerworld.com/en/models/475325#profileId-386079</a>&nbsp;This version should work great! but if you experience any issue the Thicker Rim version should help&nbsp;The cylinder is approximately 100mm in diameter&nbsp;&nbsp;Printing&nbsp;Slice with the Arachne wall generator. ensure layer thickness is at 0.2mm &nbsp;Once printed let the build plate cool. The base is fragile - take extra care when remove from the build bed.&nbsp;Occasionally a filmament line may fail. I recommend careful plucking it out - it won&#39;t affect the overall look. &nbsp;&nbsp;&nbsp;My WorkAfter many years in Engineering, I&#39;ve just decided to try and follow my childhood dream of becoming of a Creative Designer.A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that&#39;s where I&#39;m going to focus my efforts.

Suspended Filament Vortex -Original

Decor

3D Print Masters Hub

A1 Printer Simple Waste Poop Bucket<ul><li>Slim walls</li><li>Simple print</li><li>Please like and subscribe! More to come!</li></ul>🔥🔥 Check out my PRO MODELS HERE! <a target="_blank" href="https://cults3d.com/en/users/FabulousFilaments/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/FabulousFilaments/3d-models</a> 🔥🔥&nbsp;

A1 Printer Simple Waste Poop Bucket

A1 accessories 

snkxn75dvs

Laundry produces an endless supply of lint and bits of rubbish.&nbsp;Two easy strips to mount the hanger for lint. For heavier waste add screws.

Wall Mount Lint or Waste Bucket

Household

uhltimate

Create your own OTF (Out-The-Front) fidget knife with just three 3D printed parts! This compact design is perfect for restless hands, providing smooth OTF action for endless fidgeting fun. Watch my YouTube video for assembly instructions and start printing your own today!&nbsp;Update:01.05.2024 - Added a guided Blade Version with a stronger locking mechanisms.02.05.2024 - Added a comb Version as alternative.&nbsp;Features:<ul><li>Three easy-to-print parts</li><li>Smooth OTF action</li><li>Portable design for on-the-go fidgeting</li></ul>Instructions:<ol><li>Print the three parts.</li><li>Follow our assembly video.</li><li>Enjoy your custom OTF fidget knife!</li></ol><figure class="media"><div data-oembed-url="https://youtu.be/IQcEFHvocRc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/IQcEFHvocRc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>