ApatheticRiku

julianfj

Do you want to set up your Super Mario stage on the beach? With these sand molds you will be the envy of the entire beach.

Super Mario Sand Molds

Toys

Brit

Hyrule&#39;s finest milk bottled just for you! :D I recommend using a heat gun to help form the label around bottle before gluing it on. There are two label options for printing, one is a face down flush print and the other has a slight raise to the design. I like them both but prefer the raised version myself.

Zelda Lon Lon Ranch Milk Bottle 

Models

mbenthinhansen

To avoid having to buy blades for the ryobi addon for the grass trimmer, now you can print replacement youself!&nbsp;The blades are slightly thicker than the original, this to improve toughness.&nbsp;These has been tested and found working, be aware that PLA is not recommended, you will need a tough and a bit flexible filament.&nbsp;Has been tested with PETG to be OKABS would be preferred

Ryobi Trimmer Blades Long & Short Version

Tools

Byrd Anthony

As I continue to learn Fusion360 and design more things, I kept wanting to tackle the infamous “junk drawer” in the kitchen.&nbsp;Nothing drives me more crazy than the ziplock / snack bags that come in a cardboard box and do not fit in the drawers. Every time I would open or close the door, they would jam up or get more ripped.&nbsp;Plus, with starting the gridfinity project for organization, it just did not look right.&nbsp;So I worked on designing a ziplock bag holder, that was simplistic, but had a secure lid. I wanted the lid to stay on when opening and closing the door and taking out a bag but be easy enough to remove for refilling the bags up.&nbsp;This is my first attempt at designing something with a lid and magnets, so hopefully you all enjoy.&nbsp;Magnets used are 6x2mm magnets:&nbsp;<a target="_blank" href="https://www.amazon.com/260Pcs-Refrigerator-Magnets-Fridge-Whiteboard/dp/B07XRQ44VC/ref=sxin_14_pa_sp_search_thematic_sspa?content-id=amzn1.sym.432a6361-82bd-4986-a20f-2d4d577f5af5%3Aamzn1.sym.432a6361-82bd-4986-a20f-2d4d577f5af5&crid=16SM8BUAUUSAK&cv_ct_cx=6x2%2Bmm%2Bmagnets&keywords=6x2%2Bmm%2Bmagnets&pd_rd_i=B07XRQ44VC&pd_rd_r=73459101-e2b3-479a-891a-be1d8b476c0c&pd_rd_w=oYJlo&pd_rd_wg=C7Ptz&pf_rd_p=432a6361-82bd-4986-a20f-2d4d577f5af5&pf_rd_r=9930GADJGK5E3VR0SZH9&qid=1706363364&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=6x2%2Bmm%2Bmagnets%2Caps%2C72&sr=1-1-3f7eb011-4703-48ad-8058-43dbff1e6b87-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&th=1" rel="nofollow noopener">Amazon.com: VNDUEEY 300Pcs Refrigerator Magnets, Small Magnets, Fridge Magnets, Whiteboard Magnets, Tiny Magnets, Round Magnets, Mini Magnets for Crafts, Miniatures, Nails, Office, Kitchen : Industrial & Scientific</a>&nbsp;Any feedback is always welcome!

Gridfinity Ziplock Bag Holder

Gridfinity

YogiTech

Toilet paper version here (Exclusive model for members):<a href="https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r" rel="nofollow"> https://www.printables.com/model/554047-toilet-paper-holder-print-in-placequick-load-and-r</a>A paper towel holder with a print in place mechanism and quick release and load functionality. You can mounted with double sided adhesive (if its the strong kind) or with screws. Skadis version incoming..Update: Skadis version added. should be a tight fit to avoid wobble. Use similar settings motioned below to print<img src="https://media.printables.com/media/prints/530945/rich_content/25325a85-dade-4c1d-95fe-815616ccf909/img20230725011016-edit.jpg#%7B%22uuid%22%3A%22cdb8a785-116c-49ce-804d-abdd1f6c63f4%22%2C%22w%22%3A4000%2C%22h%22%3A2250%7D"><img src="https://media.printables.com/media/prints/530945/rich_content/49aec20a-1c9d-4665-ab6c-a1ab9929204e/capture25.jpg#%7B%22uuid%22%3A%2229ae5f04-4c6d-4cbb-81e2-059c0a9e7d9c%22%2C%22w%22%3A1260%2C%22h%22%3A829%7D">&nbsp;Updated V2 (July 20th):Added a spring mechanism so that the load/release is more reliable. The hinges should always fall back into place now instead of remaining open. The main part of the model is still print in place but now you must print an additional small part separately. It sacrifices a little the print- in-place philosophy of the design but should provided better functionality overall. If the springs are too stiff, I can provide thinner ones.For V2, here are the updated print settings:<ul><li>Infill can now be anything really (I used 15%)</li><li>supports from built plate but make sure you suppress the following region as they are not needed: <img src="https://makerworld.bblmw.com/makerworld/draft/280202/2023-12-18_eht4ct69rlfu.png"></li><li>0.20 layer Hight but you could try other values</li></ul>2 Parts to print: one left side and one right side. &nbsp;Settings for V1:<ul><li>supports from built plate only</li><li>0.20 layer Hight but you could try other values</li><li>50% infill to add some weight to the hinging mechanism</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280202/2023-12-18_vdfzpeust335.jpg"></figure>Once both sides are printed, remove supports and snap the hinge loose (make sure to move it around a bunch of times to smoothen the hinge mechanism):<figure class="image image_resized" style="width:98.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/280202/2023-12-18_t0gssh48yae9.gif"></figure>&nbsp;Finally, you should add some lubrications such as try PTFE sprayIf you have a laser level it can really help with the mounting:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280202/2023-12-18_t9cs8800325g.jpg"></figure>&nbsp;Try to space the sides in such a way that if the paper towel in sitting flush with the rights side you leave this much space on the left (maybe even a little more then what it is shown):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/280202/2023-12-18_1ajdeblnn9o7.png"></figure>

Paper towel Holder - Print in place / Quick release and load

Garage

Ciuf_Ciuf

<h2>General description</h2>After the great success of the drainage project, I am proposing a simpler and more intuitive version, especially for new users and beginners who are approaching the world of multicolor.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/54909#profileId-56456" rel="nofollow noopener">https://makerworld.com/en/models/54909#profileId-56456</a>&nbsp;The basic purpose is always to minimize purging material as much as possible to save on color changes and drastically reduce the amount of discarded materialI have decided to update the model and make it more user-friendlyThe basic idea was to make it a standard Bambulab Calibration, similar to the K calibrationSo, lines with numbers to instantly identify which value is the most accurate to assign to the purging of the respective materialBeing a test, it must be as economical as possible, so a test strip requires only 2 grams&nbsp;I'm leaving you the video of a guy who explains in detail how to use this type of calibrationI thank him for considering my project for the creation of a video on YouTube, and I'm pleased that I've shared his video<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FP3CwBX6A4I"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FP3CwBX6A4I" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3> </h3><h3>Pre-print Procedure</h3>*Edit 03-01-2024*&nbsp;From one of the various print profiles you download, you'll need to set the color combination you desire<figure class="image image_resized" style="width:47.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_36c2f25737bbb.png"></figure>In my case, I'm calibrating these purge combinations, and the model will result like this<figure class="image image_resized" style="width:36.6%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_e5017ae8f46d08.png"></figure>If you want to change the color combination, simply use a different type of filament<figure class="image image_resized" style="width:37.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_a174ecda4566d.png"></figure>and the print profile will adapt to the combination you have set, as in this case<figure class="image image_resized" style="width:37.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2024-01-03_f1abfb2fe5f0a8.png"></figure>The model will update in real-time, allowing you to see immediately which color you are changingI've implemented additional print profiles to significantly streamline the procedure.While the process can be fast for those with a single AMS, it might be quite lengthy for those with multiple using the previous print profiles.With these new print profiles, there is also increased compatibility for the A1 Mini model.&nbsp;The idea of implementing the print profiles in this new way was suggested by Michael when he uploaded his print profile for the V1 model. I'll leave you the link to his Makerword channel (<a target="_blank" href="https://makerworld.com/en/u/2954682459" rel="nofollow noopener">https://makerworld.com/en/u/2954682459</a>)&nbsp;As on the previous model, it is necessary to reduce the purging material to allow us to calculate the material quantity adequately.The only significant difference is that this time we set all purging quantities to 0On the dual-object print profile, you can also do it manually.However, on the other print profiles, if you want to expedite the process, you can set the multiplier to 0, instantly reducing the purge to 0<figure class="image image_resized" style="width:35.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_f161c5ce7c0868.png"></figure>Now you can start the printing process&nbsp;Note: Do not touch any other parameters I've set, or the colors won't be printed in the correct order<h3>Calibration reading</h3>After completing the print, for calibrating the K factor, we need to read and determine the most accurate value to set as the purging quantityWhat you will find in front of you will be this<figure class="image image_resized" style="width:46.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_02e09355d1abf8.jpg"></figure>As you can see inside the two green rectangles, that is the exact moment when the material is purged, and the next color takes over.<figure class="image image_resized" style="width:46.78%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_617da72c674e78.jpg"></figure>At this point, all that's left is to identify the correct value and set the purging quantity for that specific color changeFor these tests, it's highlighted that 150mm^3 of material is required to perform the color change<figure class="image image_resized" style="width:46.33%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_e9817c7179a71.jpg"></figure>In this specific case, the quantity is identical for both color changes, but for other combinations, it may varyAs you can see, the difference between the default values of Bambustudio and the ones just found is significantly lower.This allows us to reduce material waste and significantly cut down on print times, decreasing the time the printer takes to change the filament<figure class="image image_resized" style="width:35.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_a67e103190684.png"><figcaption>BEFORE</figcaption></figure><figure class="image image_resized" style="width:35.53%;"><img src="https://makerworld.bblmw.com/makerworld/draft/624812/2023-12-29_ab83cab72d7d18.png"><figcaption>AFTER</figcaption></figure>&nbsp;

AMS Purge Calibration V2

Utilities

The Dragons Den

***** Please check Raw Files for both models ******&nbsp;Dragon Business Card Holder print at 100% to fit the Cards perfect. Comes with or without flowers. I wanted to make something cute to hold my Business Cards, so I made this :) I Printed the flower one for my next show since it's a Cranberry Blossom Festival.&nbsp;I used iSANMATE rainbow.&nbsp;10% infill 3 to 4 lines .1 or .2 height No support Print in place. Please feel free to post pics of your makes. I would love to see them.&nbsp;If you would like to sell the prints join us on Tribes or Patreon for a seller's permit.&nbsp;Copyright:All The Dragons Dens designs are protected by the Copyright Law.By purchasing, you do not have the right to sell any digital files or printed models.The Digital files are never to be re-sold, shared, or given away.&nbsp;To legally sell the printed models, you can get my permission by joining our community-<a target="_blank" href="http://patreon.com/TheDragonsDen411" rel="nofollow noopener">patreon.com/TheDragonsDen411</a>&nbsp;You can join The Dragon's Den Discord to exchange with me and the community. <a target="_blank" href="http://discord.gg/k2KFnXNuBV" rel="nofollow noopener">discord.gg/k2KFnXNuBV</a>

Dragon Business Card Holder

To Be Printed

SreshMakes

So my girlfriend wanted a heart shaped planter with brick like holes on the outer rim, that could fit decorative stones around the main planter body. So i made it happen. It was used as a decoration for a few graves for people that we miss a lot. Was printed in gray ASA for it's water, temperature and UV resistance.

Heart shaped decorative planter

Gift Ideas

Swiger3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Orange At layer #17 (1.44mm) swap to Pure Yellow At layer #22 (1.84mm) swap to White for the rest.