AngelApple

ntalekt

These make perfect gifts for teachers and even have a little space on the bottom to add a little text.I remixed JBakutis's original Apple using Fusion 360 to reduce the mesh, make to bottom solid, reduce the height, and a few other tweaks.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/234044/2023-11-30_4xqooiqmcpz8.png"></figure>Printed at 0.16mm layer height on my BambuLab P1P using<ul><li><a href="https://amzn.to/40ZPuNe" rel="nofollow">PolyTerra Matte Lava Red PLA</a></li><li><a href="https://amzn.to/47ZTy2x" rel="nofollow">PolyTerra Matte Forest Green PLA</a></li><li><a href="https://s.click.aliexpress.com/e/_DDHWrSx" rel="nofollow">Bambu Textured PEO build plate</a></li></ul>

Apple with stem

Food

CasaPrint3D

Introducing the TwistBloom Pen&nbsp;This pen features a flower-shaped design with a threaded stem and base, allowing it to effortlessly twist and lock itself into its accompanying vase. With just a gentle twist and the force of gravity, the pen elegantly screws itself into place. To pull it out, grab it by the leafs and let gravity unscrew the base. Then, lock the leafs on top of the pen against the flower to prevent them from moving down while you&#39;re writing.&nbsp;<blockquote>Not just a writing tool, the TwistBloom pen doubles as a fidget toy, perfect for relieving stress and boosting creativity.</blockquote>&nbsp;Materials needed:You will only need the ink chamber and tip of a standard BIC crystal pen&nbsp;Recommendations:In case it doesn&#39;t work smoothly, make sure to remove any leftovers from the brims or any burr created during printing. Shinier filaments seem to create less friction on the threads and they work better overall. Sometimes it may need a small twist to screw/unscrew properly into place&nbsp;If you wish to support this project you can donate via <a target="_blank" href="https://ko-fi.com/casaprint3d" rel="nofollow noopener">Ko-Fi</a>Remember that this file is only for personal use - commercial licenses are available on <a target="_blank" href="https://www.patreon.com/CasaPrint3D" rel="nofollow noopener">Patreon</a>&nbsp;Print settings:<ul><li>0.2 layer height - standard profile</li><li>Brim recommended for the pen as it is printed vertically</li></ul>Happy printing!

TwistBloom Fidget Pen: Write, play, decorate

Pens

cruse2382

Gyroscopic snowman fidget toy/ bauble&nbsp;may have to snap center parts loose but ive printed a few of each and always worked for me.&nbsp;Includes 3mf with model separated into parts for easy printing without AMS

print in place Gyroscopic  fidget snowman bauble 

Fidgets misc

CherrysCollection

Adjustable Organizer (Can make the compartments bigger or smaller)&nbsp;There are 10 different sizes of the inner dividers 1-10. and there are 13 slots for the dividers so you can have up to 14 compartments. &nbsp;You can use the reference picture to decide which ones you need to print, ofcourse you can print all of them if you so wish. All the slots are marked with numbers 1-10 to make things easier after the print is done.&nbsp;I would like to improve the model. Please come up with feedback/suggestions.&nbsp;Happy Printing!

Adjustable Organizer

Organizers/vendor things

CustomCreations

Cow coaster !109.5mm diameter.only 3 filament changes.Stand for my coasters here:<a target="_blank" href="https://makerworld.com/en/models/170541#profileId-187215" rel="nofollow noopener">4 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241129#profileId-257192" rel="nofollow noopener">5 pcs</a><a target="_blank" href="https://makerworld.com/en/models/170544#profileId-187219" rel="nofollow noopener">6 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241132#profileId-257196" rel="nofollow noopener">7 pcs</a><a target="_blank" href="https://makerworld.com/en/models/170546#profileId-187222" rel="nofollow noopener">8 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241140#profileId-257204" rel="nofollow noopener">9 pcs</a><a target="_blank" href="https://makerworld.com/en/models/241150#profileId-257213" rel="nofollow noopener">10 pcs</a>&nbsp;If you want a design in a similar motif feel free to message me :)

Cow coaster

Coasters

Black Glovz

Halloween Lamp&nbsp;Even if it's looks a little complicated. Very easy to assemble. See third picture.&nbsp;All parts snap together tight, no need for glue. &nbsp;For printing use Clasic mode, not Arachne. I used Generic PLA profile, no calibration and they fit together.Can hold any size LED light&nbsp;

Halloween Handheld Lamp LED Lightbox

Lamps/lights

dubmehard

Hello,&nbsp;not today cat sign.&nbsp;Thanks for your download, enjoy the print!

Not today cat sign

Signs

3DPrintsMom

🐾✨Introducing the Cat Santa Ornament, following the success of the beloved Dog Santa!Inspired by the charming Maine Coon cat, this ornament is a delightful addition to any cat lover's holiday decor collection.&nbsp;I created two print profiles to suit your decorating preferences:- 10cm diameter- 8cm diameter&nbsp;If you're a dog enthusiast, be sure to check my charming Dog Santa Ornament:<a target="_blank" href="https://makerworld.com/en/models/80002#profileId-84916" rel="nofollow noopener">https://makerworld.com/en/models/80002#profileId-84916</a>&nbsp;This ornament will look fantastic in various colors too!Please share your prints.Happy printing 🎄&nbsp;

Santa Cat Christmas Ornament

Ornaments

HJ_3D_

Geometric Eevee low poly with his stand&nbsp;Check my other design on my profile :<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452309/design/2024-05-02_3d9e25a9d8304.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452309/design/2024-05-03_1c628df52c0b1.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452309/design/2024-05-02_e703322a55572.png">

Geometric Eevee low poly

Wall art

Biskup

Do You also know somebody who kill every plant what he finds? So use this to everyone, and maybe he will get it and stop to do that… That person can be anybody - your family, colleague, girlfriend, some random guy in apartment house. &nbsp;Just add with marker Name on Tombstones and start helping the plants!&nbsp;Success is not guaranteed.

Flower Tombstone

Garden

PecaCZ

Headband- Cat

Headband- Cat

Headbands / hair

TheWrogny

Square table for your DnD campain! :)&nbsp;please feel free to leave a comment, rating add a real photo&nbsp;

DnD Table square

Schmoaler

This is a stand for the <a target="_blank" href="https://makerworld.com/en/models/386483#profileId-286911" rel="nofollow noopener">Zelda A Link To The Past Map</a> made by <a target="_blank" href="https://makerworld.com/en/@Fletch16" rel="nofollow noopener">Fletch</a>.&nbsp;I was a bit worse, that I could not find a good place for this really cool map.The Map should be an eyecatcher, so it looks not so nice when it leans against the back of the shelf.&nbsp;So I create this simple stand with the original lettering from the english and german game instructions.The Stand is primary created for my upscaled print (200x200mm). These are the stands on the pictures, which are tested.I made a set for the original size of the map (156x156mm) too, but I did not make a test print.The only change of the smaller version is the length of the front part with the lettering.I hope anyone prints the smaller version, and give feedback.&nbsp;Happy printig.

Stand for the Zelda A Link To The Past Map 

Misc

Yuro3d

Pokeball Keychain

Keychains

mslim1513

Unicorn

Plant pots

jakobdam

This is a set of earrings that I created using Illustrator and 3D software for depth extrusion. It&#39;s fast and fairly easy to print.&nbsp;Earring height: 45mm&nbsp;The overall shape is a water drop, and inside we see Pikachu in a quick attack / jump / running pose.&nbsp;The hole is supposed to be 2.5mm in diameter, but it often comes out a bit smaller in real life - which can be countered by increasing hole expansion in your slicer.&nbsp;The print doesn&#39;t require any supports and is fairly easy - but here are my recommendations:<ol><li>Go SLOW. Since there&#39;s not a lot of surface for first layer adhesion, there&#39;s an inherent big risk of the earrings falling off the plate if you print fast.</li><li>Use a 3mm brim for better layer adhesion.</li><li>Do NOT use ironing on the top layer. Everytime I did that in my tests, it resulted in the print coming off the plate.</li><li>Turn off all fans for better layer adhesion.</li><li>Print at 0.1mm for a very crisp result, or print at 0.2mm in less than 15 minutes even at slow speeds, for both earrings.</li></ol>If you want a superior finish, you can use wood filler, sand it all down with sandpaper, then use paint. If you do this, it doesn&#39;t really matter what color of filament you use, as the final paint will determine the color. The result I show in the pictures here, are not post processed at all, and part from removing the brim and mounting the earrings (sterling silver 925), I haven&#39;t done anything.&nbsp;This print may be used commercially, but attribution is required upon sharing.&nbsp;--------------&nbsp;Also in this series:&nbsp;<a target="_blank" href="https://makerworld.com/en/models/428260" rel="nofollow noopener">&gt;&gt; Charmander earrings</a>

Pikachu earrings - drop shape silhouettes

Earrings

Dayan

My first (beginner) take on a minimalistic bulbasaur keycap and I hope you like it! Initially designed for Resin printers, however it will print decently well on FDM printers. If printing with FDM, would recommend using the rectangular stem as the circular stem is too narrow for it to be stable. This is the first of a series of minimalistic keycaps/miniatures that I plan to release in the future.&nbsp;Recommended:<ul><li>slow printing speed</li><li>Smaller layer heights <0.2mm layer heights - Printed at 0.12mm layer height</li><li>Light sanding and tiny amounts of fine filler for post processing before painting as shown in the photo. However printing with multicolour should work fine</li></ul>&nbsp;Thanks, hope you enjoy and happy printing!

Bulbasaur Pokemon Minimalistic Keycap

Keycap fidgets

The Dragons Den

Baby Crystal Standing Dragon, 1st of the series was test printed down to 70%. This is so cute I just love how it looks and moves. Head is an easy pop in, with a new pop in. If you want to print it smaller, I would check the walls of the pop in on the head if you make that to skinny the pop in might not work well.&nbsp;***Model has been fixed and test printed on a Bambu***&nbsp;10 to 15% infill 3 to 4 lines .1 or .2 height No support Print in place No support Print with raft or brim if dosent stick Please feel free to post pics of your makes. I would love to see them.If you would like to sell the prints join us on Tribes or Patreon for a seller's permit.These files are for personal use only unless you have the seller's permit. The Dragons Den models are under copyright.The Digital files are never to be re-sold, shared, or given away.<a target="_blank" href="http://patreon.com/TheDragonsDen411" rel="nofollow noopener">patreon.com/TheDragonsDen411</a>You can join The Dragon's Den Discord to exchange with me and the community. <a target="_blank" href="http://discord.gg/k2KFnXNuBV" rel="nofollow noopener">discord.gg/k2KFnXNuBV</a>

Baby Crystal Standing Dragon

Misc articulated

Kit Crafters

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-23_a1fe1017e49a5.png"></figure>Test your skill and launch marbles into a moving basketball hoop under stadium lights!&nbsp;The Mini Motorized Basketball Game is a collaboration project with MakerWorld to showcase the wondeful and infinite possibilities of the new Maker&#39;s Supply kit! This model features a motorized moving basketball hoop, stadium lights, a customizable sign, and an aimable basketball launcher.&nbsp;The motorized moving hoop rotates twice in one direction, before changing directions to rotate twice again. I&#39;m especially proud of this because the motor only turns in one direction, but the output alternates directions automatically using a fairly simple gear system.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-23_37277e02f9ded.webp"></figure>&nbsp;The entire model is assembled using snap connectors, so no glue is needed at all and it will be simple to disassemble if you need to reuse any of the non-printed components.&nbsp;Here are the non-printed components needed (all available in the Maker&#39;s Supply kit):<ul><li>1x 0.5x5x25 mm Helical Spring (BB004)</li><li>1x 2x33 mm Brass Dowel Pin (DA006)</li><li>1x 6003 Plastic Deep Groove Ball Bearings (EA001)</li><li>1x 6204 Plastic Deep Groove Ball Bearings (EA002)</li><li>1x M2.5 Stainless Steel Hex Nut (AB001)</li><li>1x M2.5 Socket Head Cap Machine Screws (SHCS) (AA005)</li><li>1x M2.5 Stainless Steel Flat Washer (AC001)</li><li>14mm Plastic Balls (ZB001)</li><li>1x Power Distribution Board (PDB)</li><li>3x Jumper Cables</li><li>1x On/Off Switch Board</li><li>1x USB Power Cable OR 1x AA Battery Case</li><li>2x LED Board 5v Rectangle (KB001)</li><li>3x Wire 20cm (IC007)</li><li>1x N20 Series Motor with Gearbox 150rpm (LA002)</li></ul>You can see the full list and purchase them from Bambu Lab at the bottom of the page!&nbsp;If you have an AMS, the hoop and the court are multi-colored (with very little wasted filament) to make the project really shine!&nbsp;Everything has been tested on the X1C, A1, and A1 mini! All parts fit on the A1 mini bed.&nbsp;Several pieces in the project use specific settings to ensure the model operates as smoothly as possible:<ul><li>Back Wall - Only part that needs supports, luckily the supports are easy to remove</li><li>Hoop Disk - To counterbalance the weight of the basketball hoop and the ball bearing, the hoop disk has a modifier for 50% infill on half of the model</li><li>Court - This part is printed upside for two reasons, to allow the multicolor to print cleanly and to put the slope on the back of the model to allow the top of the model to be smooth to allow the marbles to roll easily</li><li>Worm Gear - The worm gear is printed with a layer height of 0.12mm (0.4mm nozzle is used) to avoid using supports</li></ul>All of these specific settings are accounted for inside the provided profiles, so no need to do any of these changes yourself if you&#39;re using a Bambu Lab printer.<h2>Build Instructions</h2>Starting with the Court, most of the parts are connected using the printed snap connectors. The snap connectors ‘snap’ into the square/diamond looking holes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_7228c5c986ef5.png"></figure>Attach the Court Feeders to the Court and insert the small Stabilizer piece into the court before connecting the Launcher Base:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_b7324071e93b.png"></figure>Next, attach the Court Fence and the Side Nets:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_980b0faffb8b1.png"></figure>Next, the Gear System will be put together:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_3e21f4b38ea5c.png"></figure>Slot in the two identical Aux Gears into the center of the Back Wall as well as the Connect Gear:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_8827bc40567eb.png"></figure>Slot in the N20 Series Motor with Gearbox 150rpm (LA002) with the Worm Gear attached. Place the small Output Gear loosely between the two Aux Gears:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_7e7eca2c20c82.png"></figure>Attach the Gear Cover using snap connectors and ensure the small Output Gear from before is in the center of the Gear Cover. Connect the Big Gear to the small Output Gear like so:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_e87d333574008.png"></figure>The Hoop Disk Axle goes into the final hole. Insert the M2.5 x 10 Machine Screw and M2.5 Washer into the Hoop Disk Axle:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_78eb21d3db5df.png"></figure>On the other side of the Back Wall. Attach the Hoop Disk to the Hoop Disk Axle with an M2.5 Nut:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_06e994cfc79f1.png"></figure>Attach the 6204 Plastic Deep Groove Ball Bearings (EA002) into the Hoop Disk:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_82904dda79b4d.png"></figure>The Backboard and the Hoop are friction fit together and attached to the Plastic Ball Bearing:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_eb046add5c036.png"></figure>Attach this finished secdtion to the main model:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_8c7a062fb1336.png"></figure>The Hood and Customizable Sign are then attached on top of the main project like so:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_510f84271e3f2.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_dd6cee89affcc.png"></figure>Next, the Launcher will be put together, starting with the other Plastic Bearing:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_e721e981fcf9.png"></figure>The Launcher to Bearing part and the Bearing Cap snap together through the bearing like so:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_53c726d90ace2.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_5eb952edb124.png"></figure>The Launcher Base is then attached:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_6c0e526c50d2a.png"></figure>The small nub on the Launcher Base and underneath the Launcher Arm allow you to securely attach the 0.5x5x25 mm Helical Spring (BB004):<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_f2dc8416c7e98.png"></figure>The completed Launcher mechanism slots into the main base like so:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_1b94049bd8404.png"></figure>Lastly, the electronic components can be press fit into the following spots on the model:The PDB and the Switch slot into the back of the model:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_927237cfda73e.png"></figure>The LED Boards go under the hood with the wires fed through the holes in the hood:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420464/design/2024-04-14_b3c0f4da1c499.png"></figure>

Mini Motorized Basketball Game

Games

Libro

Butterfly kit card 3D puzzle

Card kits

misenique

Celebrate the Year of the Dragon with this enchanting Dragon's Tale Bookmark. Simple in design yet full of charm, this bookmark captures the essence of the majestic dragon in a sleek silhouette. Perfect for dragon lovers and avid readers alike, it's a delightful companion for your literary adventures. Whether you're exploring fantastical realms or journeying through historical epics, let this bookmark be your guide, holding your place and bringing a touch of mythical magic to your reading experience.&nbsp;I added a print profile without ironing, but i recommend the version with ironing, since it came out great!&nbsp;Check out my Loveball Twist Lock Container!<figure class="image image_resized" style="width:37.65%;"><a href="https://makerworld.com/en/models/150707#profileId-164400" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/435301/2024-01-21_10f9200edfc278.jpg"></a></figure>&nbsp; &nbsp;&nbsp;&nbsp;

Dragon's Tale Bookmark

Bookmarks

Taikounou

This is a voltorb fidget spinner! I have tested it at 100%, 70%, and 50% in basic PLA and they all work. Spin this little guy whenever you are feeling bored and imagine him building up voltage.&nbsp;These are loose fit spinners, and as such will not spin as well as a regular fidget spinner with bearings inside. The loose fit allows it to scale smaller. 70% size is preferred by me and my younger kids.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/766308/2024-03-25_f2317f8d9006.png"></figure>&nbsp;