AllTheLayers3D

Zahi__

I needed litter box mat since our kitty always made a mess in front of the litter box, I found one online that I liked, but the shipping time was week long and quite expensive. I figured I could design something similar myself and print it in fraction of time and cost :) .&nbsp;The size is 40cm x 23cm x 3cm (when assembled)&nbsp;Top mat is solid because I wanted to use 0 top/bottom layers “trick” to have infill as the mesh.I recommend using my .3mf to get the idea of how it works and you can increase/decrease infill% to make it more or less dense.Dovetail has 5 degree groove, so you have to insert the male part from above.&nbsp;Also in picture I added support pillars for the mat, which are already part of model in published version.&nbsp;For feet, i used 2cm diameter and 5mm high silicone feet i had from store (the hole is 3mm high), but you can also print yourself some from TPU

Cat litter mat with tray

cat stuff

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>

StarWars deathstar lithophane lamp

fanart

GuyH77

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it&#39;s purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design. &nbsp;Alternative Design: Only tested by me so far: <a target="_blank" href="https://makerworld.com/en/models/507985#profileId-423740" rel="nofollow noopener">https://makerworld.com/en/models/507985#profileId-423740</a>&nbsp; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -&nbsp;A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic.&nbsp;I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects.&nbsp;The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.

cat stuff

fanart

x1c mods