All.The.Bits

organization

michelem

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000379716/design/2024-04-23_afe4fcf49329c.png"></figure>A practical tabletop shelf that can be connected and stacked.&nbsp;Available in different heights and 2 versions, flat and rough.&nbsp;Great for organizing cosmetics and small personal care items in the bathroom, as well as spices or coffee cups in the kitchen.&nbsp;Possibilities are endless just get creative.&nbsp;You can connect and stack any shelf, regardless of its height, for maximum versatility.&nbsp;There are also two inserts top/bottom if you want to cover unused holes and give a touch of color to the shelf.&nbsp;Drawer is available only for 75mm version.&nbsp;Print&nbsp;Shelf must be oriented with the back side on the build plate (look at picture)&nbsp;You don&#39;t really need support, but if you have problem with the connect joint add it (look at my 3MF file).&nbsp;.20mm resolution would be fine, you could use a .16mm just for the connectors.

Tabletop Modular Shelf Rack

Markets

k2thestank

Print this decorative hollow stump to fill with trinkets or other fun items:&nbsp;We use ours to hold our McGybeer Racoons and Pandas!&nbsp;PLA Print Settings:<ul><li>2 walls</li><li>2-5% infill</li><li>3/5 Top/Bottom Layers</li><li>0.2mm layer heights</li></ul>ABS Print Settings: <ul><li>3 walls </li><li>10% infill </li><li>5/5 Top/Bottom </li><li>Layers 0.2mm layer heights</li></ul>

3D Printed Stump /w Lid

critter homes

Sevro

A bowl for candies and other sweets in shape of ghost.<figure class="media"><div data-oembed-url="https://youtu.be/buXmyCewa3k"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/buXmyCewa3k" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Candy Ghost

Halloween

Svyjvy

This is Titi. She can be used as a decorative bowl, or a planter, or whatever you want. (I recommend printing her upside down so if supports are necessary they don't damage the cosmetics, only the inside of the bowl)

Titi the Multi face bowl/planter

House

Grumpy Ol Vet Printing

Chicken Sign&nbsp;Printed using an AMS

Chicken Sign

Chickens

JamesThePrinter

<figure class="image image_resized" style="width:35.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-26_de27ba4fb5d07.gif"></figure>This gift box uses a double slider-crank mechanism to lock its lid in place. The mechanism is a simpler version of my <a target="_blank" href="https://makerworld.com/en/models/13129" rel="nofollow noopener">Mechanically Locking Container</a>, but with a Christmas spin (pun intended) that was inspired by <a target="_blank" href="https://thangs.com/designer/frikarte3D" rel="nofollow noopener">frikarte3D</a>. Just rotate the snowflake to unlock the gift inside!Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;Files needed:<ul><li>Lid</li><li>Container</li><li>Outer Linkage (Print 2)</li><li>Mid Linkage (Print 2)</li><li>Inner Linkage</li><li>Snowflake Knob</li></ul>&nbsp;Print SettingsNo supports necessary. Print all pieces in the orientation that they come. Be sure to print 2 mid and outer linkage pieces. If you have issues with mid linkages breaking, PETG may be a better option.&nbsp;Lid Assembly InstructionsWith the lid upside down, insert the inner and outer linkages. The orientation of the outer linkages matter. One face is flat, while the opposite has a slight taper. The flat side should be against the lid. The tapered side should face the container.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-27_zry1fclk9ecl.png"></figure>With the inner linkage in a horizontal orientation and the outer linkages sticking out about 5mm past the outer edge of the lid, the mid linkages should snap into each piece. Some force is required. Be sure that you press them straight down - if they are tilted during pressing, they may snap.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-27_87qjfx0q6vu7.png"></figure>The snowflake knob will need to be glued in place on top of the inner linkage. Place the knob onto the inner linkage and ensure that the linkage moves smoothly. Once happy with everything, use a small amount of glue to permanently connect the knob and inner linkage. If you use too much, it may run out onto the lid and lock everything in place.Tip: If you flip over the entire assembly while drying, glue cannot leak out.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/230668/2023-11-27_0qpe31eciqrf.png"></figure> <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Dark Red PLA</li><li>Bambu Lab Crimson Red Sparkle PLA</li><li>Bambu Lab Matte Dark Green PLA</li><li>Bambu Lab Bambu Green PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>

Mechanically Locking Gift Card Box

Christmas

eds_3d_shop

🙏😊💬Quote from user feedback: &#34;…finally a design that is minimally invasive and works well all the time, does not fall down during operation, without danger of destroying LED and without having to stick some constructions on the first-stage-motors with double-sided adhesive tape!&#34; &nbsp;⚠️Working on this complicated model takes a lot of time and if you like my work and want to support me and this design - please BOOST this design (click on the small Rocket 🚀 or „BOOST“ button) 🙏👍 Thank you in advance!🙏&nbsp;! Please take bed adhesion very seriously when printing these little helpers, use 3DLAC OR GLUE STICK if necessary, BUT not BRIM, if you will nice Logo quality! In my printprofile the color sequence is set so that the logo color is printed first in order to get very nice, sharp contours. When BRIM is switched on, Brim will also be printed in LOGO color and unsightly marks will be left on the edges !&nbsp;Important! There are several reports that AMS units, that arrived to users from 08.2023 had a slightly changed configuration of the feeding funnel. The AMS Funnel Buttons on the new units are thicker.Please check the thickness of AMS Funnel Buttons before printing the covers! If it is about 1mm thick - then you are in the right place! If the thickness is more than 1mm (should be about 2mm thick) - then take <a target="_blank" href="https://makerworld.com/de/models/49581#profileId-51430" rel="nofollow noopener">this version for the new revision of AMS feeding funnel</a> with the straight PTFE channel.<h3>UPDATE from 26.11.23: The NEW Version 3.0 is universal for all current revisions of AMS - feel free to check out the version too!</h3><figure class="table" style="width: 82.77%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><h3><a target="_blank" href="https://makerworld.com/en/models/74679#profileId-79072" rel="nofollow noopener">The NEW Version 3.0 with “Shield-Logo”</a></h3><figure class="image"><a href="https://makerworld.com/en/models/74679#profileId-79072" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_6fae77f588ae2.png"></a></figure></td><td><h3><a target="_blank" href="https://makerworld.com/en/models/79334#profileId-83866" rel="nofollow noopener">The NEW Version 3.0 with “Arrows-Logo”</a></h3><figure class="image image_resized" style="width: 96.77%"><a href="https://makerworld.com/en/models/79334#profileId-83866" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-30_a4414d961adf9.png"></a></figure></td></tr></tbody></table></figure><h3>UPDATE 30.10.2023</h3>I have added a new version 2.0, it fits the old and new revisions of AMS feeding funnel. Aside from that, in Version 2.0 the PTFE tube is inclined towards the spool. This should ensure even better filament guidance and is particularly perfect for Hymera Mod User to do not have any contact of PTFE with AMS Lid. You can find this <a target="_blank" href="https://makerworld.com/de/models/52774#profileId-54565" rel="nofollow noopener">v.2.0 of Perfect Fit Bambu Lab AMS Feeder Button Cover Protector for ALL revisions of feeding funnel HERE</a>!<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 61.81%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_5cb9bb087c6f3.png"></figure></td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-10-30_2e90df1fe8d49.png"></figure></td></tr></tbody></table></figure>&nbsp;<h3>Bambu Lab X1 AMS Feeder Button Cover/Protector - “Arrows” - Version</h3>I have read some reports that the abrasive filaments &#34;grind&#34; the feeders from AMS (which are themselves from the plastic) very quickly! And this problem may <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-feed-funnel-assy" rel="nofollow noopener">affect the loading and unloading filaments</a> !<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_8517c1b993479.png"></figure></td><td><figure class="image image_resized" style="width: 96.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-11-18_ce81a7f51e7a7.png"></figure></td></tr></tbody></table></figure>I found an interesting feeder cap at Printables (thank you, Maverick Ng, for sharing your model! <a target="_blank" href="https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix" rel="nofollow noopener">https://www.printables.com/de/model/360318-bambu-lab-ams-feeder-button-remix</a> ) and reconstructed it a little so that the cap sits very stable on the feeder and can still be easily pulled on and removed. Look at Installation-Video on my Instagram Channel - its very easy! :-) With the 10mm long PTFE tube in it, the feeders are now well protected! For printing of really abrasive filaments - take better 30mm PTFE tube - then PTFE inserts are rubbed off more slowly, as short one.&nbsp;Please read the print instructions carefully! They are important so that the small parts can be printed correctly and then sit and hold well on the feeder! If you have done everything right and the protectors should still fit too loosely - you are welcome to use the stiffer version - the jaws are 0.4mm thicker: <a target="_blank" href="https://makerworld.com/de/models/41859#profileId-42399" rel="nofollow noopener">https://makerworld.com/de/models/41859#profileId-42399</a><h4>Print / Install Instructions:</h4><ul><li>place them with the logo on the build plate</li><li>first layer line width: 0,35 (0.4 mm Nozzle)</li><li>first layer speed: 10ms per second (for perfect look of the button-surface)</li><li>2 perimeter, 4 top/bottom layer, 20% infill</li><li>take better PLA/ASA - they are stiffer, for better hold on the feeder</li><li>print layer height: 0.16mm and WALL generator: Classic (in this case please no Arachne) !!!</li><li>It is helpful to swith your Bambulab Printer from “Standard” Speed to “Quiet”!</li><li>If you have weak adhesion for PLA on your plate - feel free to use a gluestick or brim!</li></ul>Cool recomendation from User <a target="_blank" href="https://www.printables.com/de/@SHAYDED_915092" rel="nofollow noopener">SHAYDED </a>(Thank you! :-): “If you are struggling with sagging, move the parts closer to the aux fan, orient the overhang towards it, and crank it up to 70-100%”. I had no problems with sagging (just printed 4-5 of them at once and slow), but why not? :-)&nbsp;Take a look for Video/Post about this model on my instagram channel: <a target="_blank" href="https://www.instagram.com/eds_3d_shop/" rel="nofollow noopener">https://www.instagram.com/eds_3d_shop/</a>&nbsp;!!! Please take a look at this video, here you can see how you can easily get these protectors on the feeder properly!⚠️IMPORTANT!⚠️ You don&#39;t need to disassemble your AMS or remove any parts!<figure class="image"><a href="https://www.youtube.com/watch?v=B__yoIvm2HE" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2023-12-25_f39cd3895ac75.png"></a><figcaption><a target="_blank" href="https://www.youtube.com/watch?v=B__yoIvm2HE" rel="nofollow noopener">YouTube Video: Installation and removing of „Eds Perfect Fit Protector for BambuLab AMS Funnel-Feeder“</a></figcaption></figure>Short and cool description from User <a target="_blank" href="https://www.printables.com/de/social/35822-spectregadget" rel="nofollow noopener">SpectreGadget</a> : “Push forward with the back of the cap against the lever to snap it in place. Then line up an press firmly down to get over the existing inlet, until it snaps in place.”&nbsp;Please look at these pictures - good example of correct installation 👌😊👍<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_a801552bcd1f6.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_e60113e41f4b8.png"></figure></td></tr></tbody></table></figure>— ! —&nbsp;Thanks for downloading, rating in advance and please don&#39;t forget to like👍and to BOOST 🚀 this model! ;-)&nbsp;⚠️If you have an A1/A1mini with AMSlite - take a look at this design 🦾😊<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_ccdb0c618a4df.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td><td><figure class="image image_resized" style="width: 97.13%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-05-18_bfa54dc7f896d.gif"><figcaption> <a target="_blank" href="https://makerworld.com/en/models/467088#profileId-376126" rel="nofollow noopener">AMSlite PTFE Tube Easy-Clip-Connector</a> 🦾😊</figcaption></figure></td></tr></tbody></table></figure><h3>Take a look at my other very helpful designs for X1/P1P/P1S/A1/A1mini:</h3><figure class="image"><a href="https://makerworld.com/en/u/4051934936" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000040194/design/2024-04-08_9c244b209c063.png"></a><figcaption><a target="_blank" href="https://makerworld.com/en/u/4051934936" rel="nofollow noopener">🔗Eds_3D_Shop designs on MakerWorld 🔗</a></figcaption></figure>&nbsp;If you like my work and want to support me - please follow me and if you want - you can buy me a coffee! <a target="_blank" href="https://linktr.ee/eds_3d_shop" rel="nofollow noopener">https://linktr.ee/eds_3d_shop</a>Thank you for your support and.. happy printing!Ed ;-)&nbsp;&nbsp;

AMS Feeding Funnel Wear Protector!

Printing Tools

Julia Ebert

This little toilet is a fun easter egg to add to your home decor or dollhouse. It measures about 100 mm long when assembled. It has a movable seat and lid, and a pipe down from the bowl in case you want to flush anything down.I've also included STEP files in case you want to modify it.<h4>What to print</h4>Print either:<ul><li>(Recommended) toilet.3mf. This includes seam and layer height configuration.</li><li>One each of the included STL files. I recommend printing at 0.15 or 0.16 mm layer height. This requires no supports. All STL files should be correctly oriented for printing on the bed. </li></ul><h4>Assembly</h4><ul><li>Cut a piece of 1.75mm filament about 10 cm long, with an angled tip. Check that this fits through all of the holes in the lid, seat, and base. You might need to scrape out the holes with a small file or craft/xacto knife.</li><li>Line up the base, seat, and lid and slide the filament through all the hinge holes (6 total). Cut each end of the filament flush with the hinges. If the filament is loose, add a drop of super glue (cyanoacrylate/CA glue) or similar to the ends.</li><li>Attach the tank to the base by adding glue to the corresponding holes & pegs.</li></ul>

The Golden Toilet

IndomReps

Milwaukee M18 Tool and Battery Mounts&nbsp;*** Update 1 - 10/28/2023 ***<ul><li>Revised tolerances of model so that fit is a little bit looser and releases from the battery a lot smoother.</li><li>Revised thickness of batteries mounting face so that the larger High Output batteries can be mounted flush to a surface without the battery interfering with the mounting surface.</li></ul>&nbsp;Tool mount will work with most tool types, intended to be underhung mount but can be side mounted if it suites a certain tool. The battery mounts will work with any M18 battery and can me mounted in any orientation as it uses the batteries locking mechanism to hold it into place. Use 2 #8 screws to attach them to whatever you want.&nbsp;I've printed these out of PLA and Pro PLA with no issues with strength but might want to use PETG or ABS if you want to use these in something like a work truck or other environment that might get really hot in warm weather.