Alexanderwrobinson

Adam L

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove my design is original from scratch and not a “remix” of that model. It is only a remix of my OWN model. I do respect licenses of others. Note to everyone else: Now includes Fusion360 Model (because reasons.. ) !&nbsp;Some people suggested that they would prefer to use a toothbrush or brass bristle brush to clean their threads instead of the parent <a href="https://www.printables.com/model/476890-super-screw-scrubber-a-sensational-solution-for-sp/remixes" rel="nofollow">Super Screw Scrubber </a>design with paper towel. For them, I've designed this alternative version of the scrubber that lets you slap on a cut-off toothbrush or brass bristle brush or similar and glue it onto the guide. This simple but effective modification lets you get a deeper clean with a longer reach!This version is the more reliable tapered version from the parent that should reduce any first layer print issues. Since the brush bristles are the key to cleaning in this version, the exact tightness of the threads is less important.<h4>Versions</h4><ul><li>DefaultSize (Recommended)</li><li>ShortBrush - if you have a brush that's not quite long enough to comfortably reach, this offers a closer spacing of the flat part to the lead screw by ~ 4 mm. </li></ul>&nbsp;<h3>Print Instructions (same as parent)</h3><ul><li>Print at high layer resolution, I recommend 0.1 or 0.08 if possible on your printer, so that the threads fit nicely. There are slight tolerances built into the thread design so that it should clamp nicely.</li><li>Most filaments should be fine.. but I would avoid anything like carbon fiber or glow in the dark filament to avoid any scratching of the screws (though most are made of steel that probably would not scratch anyways).</li><li>Orient the flat side down. I designed the part slightly asymmetrically so this is intentionally hard to screw up when placing on your bed :).</li></ul><h3>Use instructions </h3><ul><li>Find an old toothbrush or brass bristle brush, cut off the head. Use hot glue (recommended) or some other suitable glue to attach the head to the flat section as shown in the pictures.</li><li>Attach the clamp and brush to your lead screws as shown.. run the bed up and down (make the screws rotate), and hold the clamp in place as you do so.</li><li>Remove the widget, and clean the gunk off (can just rinse with IPA and/or acetone for most greases).</li><li>Re-grease your threads if you stripped all the grease off.</li></ul>&nbsp;<ul><li>Don't use as a regular toothbrush anymore, the ADA has informed me this is not an approved dental product after this modification :). <img src="https://media.printables.com/media/prints/477870/rich_content/50fb1bab-9bd4-4c1c-b9c8-59d26d9d371c/image.png#%7B%22uuid%22%3A%222da5821e-19c2-4860-832f-116d5b83b985%22%2C%22w%22%3A652%2C%22h%22%3A600%7D"></li></ul>&nbsp;3MF & STEP file included!

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

Tools/Gadgets

Kroeskoppie

Original Source Material: - Original Creator Blastoise Model: <a target="_blank" href="https://www.thingiverse.com/neb1236/designs" rel="nofollow noopener">neb1236</a> on <a target="_blank" href="https://www.thingiverse.com/thing:5162417" rel="nofollow noopener">Thingiverse.</a>- Original Creator AMS Version Blastoise Eyes: <a target="_blank" href="https://makerworld.com/en/u/3378101082" rel="nofollow noopener">Waikikiprod</a> on <a target="_blank" href="https://makerworld.com/en/models/13162#profileId-13157" rel="nofollow noopener">Makerworld</a>/<a target="_blank" href="https://www.printables.com/model/536623-bicolor-blastoises-eyes" rel="nofollow noopener">Printables</a>. Some small notes:  - Please support the original designers, they did the awesome job of making this model.  - For licences/selling the print: please contact the original designers, not me. I did not create this awesome model. - On16-02-2024 , I created a printable version in Bambu Studio which should work on the A1 Mini. It has the same printing settings as the X1C/P1P/P1S version, but all the parts are divived on more plates, since the build plate on a A1 Mini Printer is quite a bit small. Maximum printtime for every plate has been reduced to 4 hours maximum because of this.  - I am not able to test the A1 Mini version, simply because I do not own this printer and only have a X1C. Use the profile on your own risk.  Description: A remix/share from the awesome Blastoise model. I have scaled alle the parts to 150%, as I think a Blastoise should be bigger!This Blastoise is about 20 cm high and weights about 700 grams! I also did the following: - I used a 0.16 settings basefile I like and edited it. - I sorted all the different parts on different plates for easier printing, based on color. - The default eyes are replaced by the AMS version, which makes dual color printing possible. - I adjusted the flowrate in my settings profile so the coloring of the model should be the same overal. - I put ‘Ironing’ off in my settings profiles, since this would give coloring differences, most notable in the brown shell parts. - I fixed some of the more noticable parts that where having Top Layer Spheres by <a target="_blank" href="https://www.youtube.com/watch?v=h4SiDX0q0Xs&list=LL&index=1" rel="nofollow noopener">using this guide</a>.&nbsp;If there are more suggestions for better settings, please upload them! The color sorting in the 3fm-file is based on the following filament that I used for this print: - Black: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9F3BCD/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Black.</a> - Beige: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQH6H55/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Beige</a>. - Blue: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQJ9H8F/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Light Blue.</a> - White: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ98RNP/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Cold White.</a> - Brown: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B07FQ75QG2/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Brown.</a> - Grey: <a target="_blank" href="https://www.amazon.nl/eSUN-Filament-Printer-Maatnauwkeurigheid-Printing/dp/B0BT9G9GMQ/?_encoding=UTF8&pd_rd_w=0HzkR&content-id=amzn1.sym.4c890d23-b470-4346-9711-0b7420ed943c%3Aamzn1.symc.adba8a53-36db-43df-a081-77d28e1b71e6&pf_rd_p=4c890d23-b470-4346-9711-0b7420ed943c&pf_rd_r=NPE0CGVRYZDD97JQ8MTB&pd_rd_wg=V4TwI&pd_rd_r=40b01c60-c887-49a2-a6ab-25625289c9ff&ref_=pd_gw_ci_mcx_mr_hp_atf_m&th=1" rel="nofollow noopener">eSUN PLA+ Grey.</a> Please note that eSUN is currently switching to Carton Spool Holders if you want to print from the AMS-System. I used the ‘old’ plastic filament spools which I currently still have. A complete timelaps video from all the plates/parts can be found here:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=sRZ0PQ6itUQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/sRZ0PQ6itUQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Blastoise 150% Multipart Color (20 cm height)

Fun Prints

Martin Kozak

Christmas tree puzzle

Christmas

k2thestank

Easy to print and even more fun to play!&nbsp;Suggested Print settings:<ul><li>White and Blue PLA</li><li>45-75mm/s outside walls</li><li>4 or 5 Top/Bottom layers</li><li>3 walls</li><li>10% infill</li><li>No supports Required (we built them in for you)</li></ul>print everything face down or use your pre setup file for easier printing!&nbsp;I added a simple 8 Sided Die to the print files i recommend printing it at 0.1mm if you dont already have one&nbsp;

Penquin Peril

Games

TrendtB

A large, stylish desk or shelf ornament filled with good vibes only. I designed this sign in Figma and Fusion360 to learn multi-color workflows, and bring good vibes to my workspace.&nbsp;The finished print can stand on its own and looks fantastic as a multi-color print.&nbsp;The version shown in the photo used:<ul><li>Bambu PLA Basic Red</li><li>Polymaker PolyLite PLA Yellow</li><li>Bambu PLA Basic Blue</li><li>Bambua PLA Matte White</li></ul>&nbsp;For personal use only. Not for commercial use.

Tools/Gadgets

Fun Prints

Christmas

Games

Gift Ideas

Basics