Alex_norris

Rott3D

I present you in association with ARTMAN, flexi salamander,how tags says no supp, print in place, for better durability use petg. Enjoy &nbsp;Rott3d & ARTMAN

Flexi Salamander

Emely

moonrakerone

Hit Customize and generate whatever size washer you need!&nbsp;&nbsp;Settings available to modify:<ul><li>ID (decimals are valid)</li><li>OD (decimals are valid)</li><li>height (decimals are valid)</li><li>inches (false by default, set to true to use inches as unit instead of mm)</li></ul>

Washer-O-Matic, Parametric Washer Generator

Parametric

TomoDesigns

Hi,This toothpaste creation is a mix of things that are not allowed to be mixed together. The fitting mounts on Colgate toothpaste.The nose is very practical because you can put toothpaste on 2 toothbrushes at once instead of the original slow way. Or you are more a let's clean up that nose with my toothbrush kind of guy.Vid about it and me: <a href="https://youtu.be/UY__uRUipFg" rel="nofollow">https://youtu.be/UY\_\_uRUipFg</a>Category: Bathroom

Nose Toothpaste Cap

Vogelscheuche

DPJRodrigues

<h3>Gift Idea for Mother&#39;s Day</h3>Hope you enjoy this String art mother&#39;s day gift. The text is 100% customizable in Bambu StudioNote: I&#39;ve created two set of profiles for AMS and non-AMS. In both profiles, ignore the warning from the slicer to add supports. If you add supports it will simply not work.&nbsp;<h4>Non-AMS Instructions</h4>I&#39;ve included in the profile a pause on the layer 4 (for the heart) and layer 15 (for the base) so that you can switch colors manually. If you want to replicate the same color schema on the heart you should start with Red and then switch to white on layer 4. On the base you should start with white and change to black on layer 15 for the letters.Note: when the printer pauses you need to switch to the other filament and manually extrude until the new color arrives. Clean up the nozzle and press resumeImportant: If you don&#39;t want to use different colors just remove the pause as per image below<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451384/design/2024-05-05_d8efb4c78dba4.png"><h4>Text Editing instructions</h4><ol><li>Select Objects in the Process tab</li><li>Find the “EDIT ME” object and Right Click on it</li><li>Select Edit Text</li><li>input your text (of course you can select other font but please bear in mind that if it is too thin it may not work well on a 0.4 nozzle)</li><li>Drag the text to the place you want</li><li>Repeat for the other text line or just remove and adjust the place of the other text.</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451384/design/2024-05-02_be8d284d22732.png"><h4>Assembly Instructions / Calibration</h4>All pieces snap together easily. If that is not the case for you please (either doesn&#39;t fit or too loose) I suggest to calibrate your printer or check filament. I didn&#39;t use glue but it doesn&#39;t arm if you do use to make it sturdier&nbsp;If you like my design please share your print… I would love to see them&nbsp;╭─━━━━━━━━━━━━━━━━━━━━─╮ Buy me a ☕️ or a 🍺 <a target="_blank" href="https://www.buymeacoffee.com/dpjrodrigues" rel="nofollow noopener">https://www.buymeacoffee.com/dpjrodrigues</a> ╰─━━━━━━━━━━━━━━━━━━━━─╯

Mother's day String art / vortex - Customizable

season

EPIQ3D

Have you ever needed a coin for a shopping cart, only to find out that you dont have one? Or maybe just the wrong coin size? Then this fine and dandy shopping cart key is just you. Its universal and can adapt for any coin size (that i can test).Its made to be up to 27mm (1.062 inch), and is tested down to 23mm (0.905 inch) Oh, and its removeable in any size slot. ------------------------------------------------------------------------------------------------- Mine is printet in PLA with 4 walls, and holds up just fine.But if you want to be sure, then go for PETG. ----------------------------------------------------------------- DISCLAIMER - I am i no way responsable, nor can be held acountablefor any broken models inside shoppings carts, due to bad print quality.Or other reasons in that matter.

Shopping Cart Key - Universal and removeable

spö

Fritz025

Overview&nbsp;This greeting card is perfect for anyone, no matter the age. They can simply pick their right numbers from the kit card and together with the other parts, assemble a neat little birthday cake. For single digit birthdays a “0” can be added first or any of the other decor options, like the pearls or the flag. One single cake slice can also be detached to expose the inner filling.&nbsp;&nbsp;Profiles<ul><li>Kit-Card for AMS with 4 colours (Birthday_Cake_Kit_V1.3mf)</li><li>Kit-Card with 1 colour (Birthday_Cake_Kit_V1_Blanco)</li><li>Kit-Card Tolerance Test (Birthday_Cake_Kit_Tolerance_Test)</li></ul>&nbsp;&nbsp;Filament<ul><li>Bambu Lab PLA Basic Jade White</li><li>SUNLU PLA colour wood</li><li>SUNLU PLA+ candy colour series pla+ sky blue</li><li>Bambu Lab PLA Basic Red</li></ul>&nbsp;&nbsp;Tips<ul><li>The Model requires close tolerances to ensure snug but not tight or loose fit</li><li>A print profile with some test pieces is provided (Adjust your X-Y hole compensation if needed as show <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/xy-hole-contour-compensation" rel="nofollow noopener">HERE</a>)</li><li>Ensure the filament is properly calibrated with no excessive overextrusion</li><li>Make sure the kit card cools off first, for easier removal from the build plate and to avoid any parts breaking off too soon</li></ul>&nbsp;&nbsp;Assembly<ul><li>Remove the needed numbers and cake pieces from the kit card</li><li>Debur as needed to ensure a perfect fit</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/618866/2024-02-28_94a1a86e3bdc4.png"></figure>&nbsp;&nbsp;Note: Please make sure to do the Tolerance Test (Birthday_Cake_Kit_Tolerance_Test) to avoid any unpleasant birthday surprises.&nbsp;Happy Celebrations!&nbsp;

Happy Birthday Kit Card | Cake

Birthday

DBMaking

A cute egg stand to use for Easter.

Kit card Egg Stand

chicken

PaulBPunkt

Geckos are usually found on the wall, so I modified Martin Rigatoni's great model so that it can be fitted with two 8x3, 6x3 or 5x2 mm round magnets. Now you can attach it to any metal surface. If you are interested, I can also create versions for other magnet sizes, just let me know.&nbsp;Attention: the holes have zero tolerance, if the printer is well adjusted, the magnets should be able to be pressed into the holes with a little force and then hold without having to glue them.If the holes are too narrow you can heat the magnets a little bit (not too hot, otherwise they lose their magnetism!) and then press them carefully into the holes. Or alternatively you can scale the model up a bit (about 101%) and then fix the magnets with glue if necessary.

Super (Magnetic) Flexi Gecko

children

Habitaritus

Simple Kit Card with 10cm, 6cm and mixed plant and growing plugs.&nbsp;Print and cut off. Label your favorite plants.

Kit Card - Plant and Growing plugs

garden

gabberpower

Middle finger stickman keychain very funny

Middle finger stickman keychain

fasching

threadstone

This is a remex of the Skip-Bo Card Box from Markus_p from printables (Thank you very much for providing your model data!!). I had the problem that not all cards are inside of the inner box and I wanted to put also the instructions in the box. So I made a 5mm higher version.This box also has an modified logo on top. This version can be printed with multiple color without any recesses.&nbsp;The inner box can be glued in the bottom box. To do this, orient the small dot on the inner part opposite the hinges.&nbsp;Needes parts for assambley: 6x screw M3x30

Skip-Bo Card Box (bigger)

demnächst

Satisartes

Cute christmas gnome to decorate your home.I printed this one with 0.16 layer.

Christmas gnome

weihnachten 23

Lilac Rage

Incredible Hulk Fist Logo Keychain - Set filament change at layer height 2.8mm&nbsp;----------------If you like my stuff, check out my patreon<a target="_blank" href="https://www.patreon.com/LilacRage" rel="nofollow noopener">https://www.patreon.com/LilacRage</a>

Hulk Fist Keychain - color swap - AMS Not required

marvel

Oclure

magnetic dust collection adapters with TPU Gaskets- featuring a TPU Gasket for superior seal- adapter for 4 inch DWV fittings, features a slight angle allowing it to be attached to a pipe that&#39;s mounted flush along a wall while maintaining clearance.- hose fittings feature spiral threads to help hold hose in place.- makes use of 2 10x3mm magnets per tab, for 16 in total per fitting&nbsp;additional tool adapters added, the standard one fits most of my tools but sometimes you need something a little smaller or larger, measure your tools dust port before printing to see which version you need, a few wraps of electrical tap around the tools dust port can help to snug up the fit of an adapter that&#39;s just slightly too large, feel free to comment which tools you printed which adapters for to help the community know what to print for their shop. &nbsp;please consider one of the included sizes first however if none of them work for you i have included my CAD Files from Fusion 360. &nbsp;i suggest printing extra thick walls on the hose fittings to survive potential drops.&nbsp;print face down, supports recommended but optional, supports should only be used in the magnet holes and gasket groove&nbsp;i recommend alternating the polarity of the magnets as you go around the circumference of the fitting this will let you use any fitting in combination with any other and you wont have to worry about what fittings match which.

magnetic dust collection adapters with gaskets

work

jusutus

UPDATE 04.11.2023: Corrected a dimensioning error on the magnet holes. Apologies for the mistake! UPDATE 28.10.2023: Now prints without supports :)Also changed the magnet holes for hexagonal holes for easier printing and easier fitting of the magnets.Added a 4.1mm pocket for the bowden going to the toolhead for even better filament path alignment.&nbsp;---&nbsp;A smooth three way splitter for using an AMS, rear spool holder and a drybox / secondary spool holder together on a Bambu.Smooth transitions to prevent filament snagging. I printed mine in 0.12mm layer height, which is recommended for this part.Mine is in ASA but other materials should be fine as well. Prints beautifully in 1.5hrs and only takes around 10g of filament. ---&nbsp;BOM:&nbsp;-printed part-5pcs 6x3mm magnets-4pcs PC4-M10 pneumatic fittings (like <a target="_blank" href="https://www.amazon.com/BIQU-Straight-Pneumatic-Connector-Extruder/dp/B01IB81IHG" rel="nofollow noopener">these</a>, for example)&nbsp;Assembly:&nbsp;-insert magnets (use superglue if needed)-make sure a 4mm bowden tube fits the 4.1mm pocket on the bottom connection of the “Y”, test this before threading on the pneumatic fitting-thread the pneumatic fittings on-insert splitter on PTFE tube coming from the printhead-enjoy!&nbsp;Have fun printing!

Three way splitter, no supports!

bambulab zubehör

luckyluc.64

Glock speed loader (9mm double stack)I'm sure that is not the first out. If not, it's about time.Now, this is cheating, and you should be able to reload with your finger faster than with that tool. Got that paper puncher?That makes reloading a breeze, and I have better to do with my finger… Like printing something cool or punching holes in a piece of paper far away ;-). Or not.And this is for my wife, Glock. She has better things to do with her finger, too.&nbsp;But seriously, I did get some new mag, and to fill it up to the top was not fun. That gets the fun back of plinking; no pain anywhere.&nbsp;As usual, I print it with ABS. Yes, PETg could do better, and so could the -CF and PLA is for the guy who is waiting for the flash.

Speed Loader for a Glock 9mm double stack

glock und armbrust

KYZ Design

This model was originally uploaded <a target="_blank" href="https://www.printables.com/model/460255-hsw-single-walls-with-integrated-frame-and-fasteni" rel="nofollow noopener">here</a>, check it out for past makes and comments.&nbsp;Update 30/04/2023<ul><li>"HSW Single Wall - 11x7 HD" added</li><li>“HSW Test Wall HD” added</li><li>All files renamed</li></ul>----------------My new Honeycomb Coffee Wall just needs one section of the Honeycomb Storage Wall, and I found the regular wall pieces to be too flexible and asymmetrical for my liking, so I made one with:<ul><li>Integrated borders, making the piece much more rigid and have higher weight capacity</li><li>Mounting holes on the rigid frame for secure attachment, and so you don't have to use any of the hexes,</li><li>Mountable with double sided tape,</li><li>And most importantly… Symmetry.</li></ul>SizesI just needed the big one but I made a few extra sizes for you guys to print on smaller printers as well as smaller work spaces. The first size number denotes number of cells horizontally and the second size number denotes number of cells vertically so size 11x9 means 11 cells wide, 9 cells high.Thicknesses<ul><li>Standard Duty (SD) 8mm thick</li><li>Heavy Duty (HD) 10mm thick - warning, all inserts will fit very snug as the cell walls are more rigid</li></ul>MountingScrew on with "Gauge 6" or 4mm countersunk head screws. The piece is 8mm thick so 16mm or 20mm screw will be suitable to mount to timber.Mounting is also possible with double sided tape (such as 3M VHB tape) - particularly good if you want to mount to bathroom/kitchen tiles. If you plan to tape this on and want to remove any of the screw holes, make an 8mm thick cylindrical “add part” modifier and place on top of the hole. (I would leave the holes there in case you change your mind or move it)Enjoy!&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.&nbsp;&nbsp;