Albertpercu

CraveDiscovery

Pay no attention to the paint job just wanted to get the model posted. Found this Captain America shield on Thangs. Cut it to fit a P1S and added dowels to connect. Some of them were a bit sung so I used a heat gun to expand out the hole for the dowels to fit a little better. Hope you enjoy

Sam Wilson's Captain America Shield

Captain America

emp3thy

This is the Stormbreaker axe from Infinity Wars. It's big: about 75cm (2 ½ feet) by about 50cm (1 ½ feet) and it feels heavy. This prints really, really well (the writing on the axe and hammer come out really well) and the supports (on the top of the handle) just snap off and can be removed reasonably easily.&nbsp;I've made several modifications to make this print and assemble easily (and to improve model strength):<ul><li>there is space to put (12mm) wooden or metal dowling through he center of he model. This helps with strength</li><li>the hammer has been split into two pieces. This makes it easier to print and leads to better prints, especially for the hammer pattern</li><li>The handle has been broken into pieces so that it fits on the build plate :-)</li><li>The hammer clicks into place. No glue necessary</li></ul>

Captain America

Thor