Akrtek

floriandac

J'ai remixer le support manette pour ps5 pour l'adapter au multiboard .j'imprime en 0.2 et des support sur la parti clips , utiliser le profils d'impression sinon .Vous pouvez charger la manette lorsqu'elle et ranger &nbsp;

Ps5 Controller Multiboard

multiboard

Per Mejdal Rasmussen

Cable extension box using the WAGO 221 inline splicing connector.&nbsp;Benefits<ul><li>Compact.</li><li>Very strong strain relief.</li><li>Mountable with countersunk screws.</li></ul>How to make<ul><li>Print in PETG, because it is more fire retardant than ABS or PLA.</li><li>Insert WAGO 221-2401 or WAGO 221-2411 inline splicing connector.</li><li>Secure with M3 screws and nuts. Suggest screws are 14mm with hex head.</li></ul>If this model useful for you, please support me by clicking on the “Boost” button above.<ul><li>At 100 boots, I will make and release a model that can split the connection.</li></ul>&nbsp;Video:<figure class="media"><div data-oembed-url="https://youtu.be/SfNtMvaK5H4?si=KGLEgdQbKCcScEe7"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SfNtMvaK5H4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Extension box for WAGO 221 splicing connectors

Wago

Leon

This 3D-printed Makita vacuum adapter is a simple yet effective accessory for your Makita eccentric sander. It effortlessly connects your sander to a vacuum, keeping your workspace clean by sucking up dust and debris as you work.

Makita eccentric sander Grinding Machine Suction adapter for 47mm-47,5mm suction hose 

Tools

Sven

Gehäuse für ein ESP mini mit Platz für 3 Wago Klemmen.

ESP mini Case with 3er Wago

AMT_MW

<h2>What it is</h2>Small soldering jigs for LED strips that allow to cut and fix the then stripped cables in place. With a dab of hotglue or some heat-shrink tubing they may even stay in place to secure the finished connection.Available are:<figure class="table" style="width:84.47%;"><table class="ck-table-resized"><colgroup><col><col><col><col><col></colgroup><tbody><tr><td style="height:80px;width:160px;">5mm LED strip</td><td style="height:80px;width:160px;">8mm LED strip</td><td style="height:80px;width:160px;">10mm LED strip</td><td style="height:80px;width:160px;">12mm LED strip</td><td style="height:80px;width:160px;"> </td></tr><tr><td style="height:80px;width:160px;">2-pin<ul><li>2.4mm</li><li>100thou</li><li>133thou (=3.38mm)</li></ul></td><td style="height:80px;width:160px;">2-pin<ul><li>100thou</li><li>150thou</li><li>4mm</li><li>200thou</li><li>250thou</li></ul>3-pin<ul><li>2mm</li><li>100thou</li></ul></td><td style="height:80px;width:160px;">2-pin<ul><li>200thou</li><li>250thou</li></ul>3-pin<ul><li>100thou</li><li>3mm</li><li>4mm</li></ul>4-pin<ul><li>100thou</li></ul></td><td style="height:80px;width:160px;">2-pin<ul><li>350thou</li><li>400thou</li></ul>3-pin<ul><li>150thou</li><li>175thou</li><li>4mm</li><li>200thou</li></ul>5-pin<ul><li>100thou</li></ul>6-pin<ul><li>2mm</li></ul></td><td style="height:80px;width:160px;"><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/723103/2024-02-25_3f94f3f0071c7.jpg"></figure></td></tr></tbody></table></figure><h2>How to print</h2>Recommended for printing is a layer height of 0.20mm or smaller and a 0.4mm nozzle. The provided printing files feature modifiers for optional color changes. Since the clips are small they are prone to first layer issues, this design really benefits from printing it as KitCard. → Such printing profiles are provided as well.<h2>How to use</h2>Soldering wires to LED strips<ul><li>Put the cable in place first and cut the wires according to the line given by the jig</li><li>Strip the cables (or rely on melting the isolation later on while soldering)<ul><li>optional: place heat-shrink tubing</li></ul></li><li>Place the LED strip in place<ul><li>optional: secure it with the clips</li></ul></li><li>Place the cable in place<ul><li>optional: secure it with the clips</li></ul></li><li>Solder</li></ul>I tend to use the optional clips if a LED strip or cable is somewhat wayward, otherwise they are not needed. In case you want to fix a weather proof LED strip where the printed clips do not work, a clothespin, binder clip, … , cable tie (reusable?) works as well.&nbsp;Soldering connectors to LED strips (tested with Molex KK 254 and JST-XH 2.54)<ul><li>Clip the LED strip onto the upper part that houses the cable channels<ul><li>optional: place heat-shrink tubing before</li></ul></li><li>Place a connector onto the lower part with its pins facing the strips solder pads<ul><li>optional: one clip as endstop or rubber band/clothespin/binder clip/… to hold the connector</li></ul></li><li>Solder</li></ul><h3>What next</h3>There may be improvements and modifications based on feedback given here.Expanding the variety of variants is partially triggered by request, provided the required dimensions are specified. Maybe, take a look at <a target="_blank" href="https://makerworld.com/u/2797532051" rel="nofollow noopener">my other designs</a> ;-)

LED strip Soldering jigs

Chris vK

Hi all,&nbsp;I wanted to easily open the enclosre for PLA etc. printing. Since I'm using an AMS, it's not possible to lift the topplate. Leaving the front door open, is also not an option.So I design this small frame which will perfectly fit to the enclosure and the 3mm rear panel. Easy to use and easy to print.You will need only one M3 threated insert + screw and the 6 screws, you're already using to fix the panel. It is not necessary to glue the frame, but of course possible.Of course you will be able to use the ARC Spool holder too. &nbsp;

P1P ARC Enclosure - rear panel door

XentoBi

&nbsp;Completely automated filament winding system designed for Bambu Lab's P1, X1, X1C, or X1CC 3D Printer.Explore the videos located below to witness its functionality firsthand. Stay informed about any updates related to this model by checking out the latest news.&nbsp;Always ensure bed leveling and flow calibration, especially for gears and axles when using this model! Calibration for Bambu Lab P1 is essential, particularly regarding linear advance.I've uploaded some print suggestions in *.3mf format. Included are 5 print plates for Bambu Lab / Bambu Studio, with a PEI plate at the end of the list. Note: this is not a cold plate, so exercise caution.&nbsp;Upon repeated testing, I encountered the same issue: the 45 mm axle (the driven one) broke! Using 3 walls and 25% infill isn't sufficient.If you haven't printed it yet or experienced a breakage, please print it with:<ul><li>0.16mm Optimal @BBL profile</li><li>5 or more wall loops</li><li>100% infill (sparse infill density)</li><li>Rectilinear (sparse infill pattern - set automatically)</li><li>speed outer wall (slow as possible for more accuracy) e.g. max 60 mm/s</li><li>support (yes) normal (auto)</li></ul> If the stronger printer settings for Axis 45mm are not enough, the you can also print the “Heavy Load” version (see folder “Heavy Load Parts”)Centering discs: If you need a special size, you can decrease or increase the next size in the slicer program. E.g. if you need 51.5 mm, then you can take the 50 mm disc and scale up accordingly before printing. (51.5 / 50 = 1.03, i.e. print 3% larger) Reference print settings for:<ul><li>Winder Spool Holder Main Body</li><li>Donor Spool Holder Frame</li><li>Winder and Donor Right Hand Spool Axle Nut</li><li>Donor Spool Holder Axle without Gear</li><li>all Spooler Centering Discs (50/55/60/65 mm)</li></ul>Settings:<ul><li>0.20mm Standard @BBL X1C Profile +custom settings:</li><li>Wall loops: 3</li><li>Outer wall: 60 mm/s</li><li>Infill 25 %</li><li>if you need support, don't do it at the vertical ball bearing openings support can be used under the filament carriage holder and under the lower ball bearing for the filament sled. (paint it manually)</li></ul>Print settings for:<ul><li>all Gears</li><li>all shafts / axis (except the driven one 45 mm, see above)</li><li>handle or drill adapter parts</li><li>all washers</li><li>and all Filament Guide parts</li></ul>Settings:<ul><li>0.16mm Optimal @BBL X1C</li><li>Wall loops: 3</li><li>Outer wall: 60 mm/s</li><li>Infill 25 %</li><li>no support needed, except: all axis with hexagon </li></ul>please print all parts (gears, axis) horizontally, except:<ul><li>Winder Right Hand Spool Axle with Gear 25 teeth or the Heavy Load version</li><li>Winder and Donor Right Hand Spool Axle Nut</li><li>Gear Worm</li><li>Rotary handle - twist grip - axis</li><li>Rotary handle - twist grip - knob</li><li>Donor Spool Holder Axle without Gear</li></ul>Multiple Prints:<ul><li>all centering disc's 2x per spool</li><li>4 x Washer 3.0 x 8.5 mm</li><li>2 x Gear with 50 teeths</li></ul>Additions parts:<ul><li>7 x 608 bearing</li><li>12-15 cm PTFE tube</li><li>4 x M3 hexagon socket screw (optional, you can also glue the filament guide & sled)</li></ul>Have Fun!&nbsp;&nbsp;The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles and time (I ran out of filaments a couple of times), you can do it via: <a target="_blank" href="https://paypal.me/mikloskiszely" rel="nofollow noopener">https://paypal.me/mikloskiszely</a>&nbsp;

Filament Spool Switcher for Bambulab AMS and AMS Lite

filament

rpinerd

My freestanding multiboard was a bit too top heavy for the baby feet that are officially offered. So I jumped into onshape and solved my issue!&nbsp;The height of the “foot” is 5.65 mm which corresponds to the height that the stock feet raise the board to.

Multiboard Brace

extrawitz

You will need 4 3x20mm (m3) screws to assemble. Normal nuts work. However, I have used threaded inserts from Aliexpress for M3

clampable table trash can (25mm table top)

desk

3DP RNS

[3DP RNS] Worker V1.2 (3D Printed Robot)<ul><li>Strengthening the torso and knee joints.</li><li>Refinement of the sharp edges of the elbows</li></ul>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Worker V1.1 (3D Printed Robot)<ul><li>Modify torso joints</li></ul>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Worker V1.0 (3D Printed Robot)<ul><li>Series : 2 Legs / Humanoid Type [<a target="_blank" href="https://youtube.com/shorts/tvGhQDAssUE?feature=share" rel="nofollow noopener">Youtube Video</a>]</li><li>This Is an all at once print. Assembly not required :)</li><li>If you subscribe to the YouTube channel [<a target="_blank" href="https://bit.ly/2KC3Tdx" rel="nofollow noopener">3DP RNS</a>], ★ a new robot will be revealed.</li><li>Thank you for your subscribing! It means a lot to me :)</li><li>Commercial License [<a target="_blank" href="https://www.patreon.com/3DPRNS" rel="nofollow noopener">Patreon</a>]</li></ul>&nbsp;※ Notice For my uploaded robot model to enable all joints to move, it&#39;s advisable to use a Brim.  If removing Brim is inconvenient or challenging, I don&#39;t recommend printing it.  Also, joint functionality may vary depending on the printer and filament you use. I hope your print is successful and you can have a robot with well-functioning joints.<figure class="media"><oembed url="https://www.youtube.com/shorts/tvGhQDAssUE"></oembed></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Worker V2.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-worker-0-100476630?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Worker V2.0 Download [Patreon]</a></li><li>Worker V2.0 can be obtained through Patreon (Hero) membership.</li><li>There have been some changes to the joints and additional design details have been added.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/rWWGnp2Mcy4"></oembed></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000117513/design/2024-03-17_3ca93d4eaa5cb.png"></figure>ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ[3DP RNS] Astro V1.0 (3D Printed Robot)<ul><li><a target="_blank" href="https://www.patreon.com/posts/3dp-rns-astro-v1-102720556?utm_medium=clipboard_copy&amp;utm_source=copyLink&amp;utm_campaign=postshare_creator&amp;utm_content=join_link" rel="nofollow noopener">[3DP RNS] Astro V1.0 Download [Patreon]</a></li><li>Astro V1.0 can be obtained through Patreon (Hero) membership.</li><li>If the existing humanoid robot, Worker, had a design of straight lines, this robot has been designed with curves.</li></ul><figure class="media"><oembed url="https://www.youtube.com/shorts/ThhzUq1ta_Q"></oembed></figure>

[3DP RNS] Worker_V1.2

Toys

FlorinV

Please share your make and let me know your opinion about this model. Thank you and have a great week !&nbsp;Update 11.03.2024: Added “Skull" lid. There is an optional profile for printing this lid. <a target="_blank" href="https://makerworld.com/en/@timon1201" rel="nofollow noopener">@timon1201</a> did a similar lid and gave me this idea. thanks !&nbsp;Update 29.12.2023: Added “Pine cone” lid. You can find it in the Optional Lids profile. The lid has fine details, please be sure your printing plate is clean (no finger grease etc.).&nbsp;The Automatic Toothpick dispenser:<ul><li>All parts are 3d printed, all in one plate. No AMS needed.</li><li>Several Lids to choose from and a clean lid to customize it as you wish. “Voronoi” and “Yoda” lid are found in the model profile. Other optional lids will be added to the “Optional Lids” profile.</li><li>Each part easily fit together. Please check the short building video bellow. ( 1min 30sec minutes to build )</li><li>works with toothpicks of max 66mm and approx. 2mm diameter (normal toothpicks I've found ). Please shake the dispenser to arrange the toothpicks correctly and parallel. Throw away toothpicks that look too different than normal ones: damaged, askew.</li><li>The two arms that hold the big parts together have printed on them L and R, to be sure you set them correctly (left and right).</li><li>The 3d printed spring should be inserted like in the video, first on the back with the other end up, then the front.</li></ul><figure class="image image_resized" style="width:30.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2023-12-14_9977d673e0c9a.png"></figure><ul><li>Second spring is optional (the left one). After some use, it will work smoother, as the parts needs some time to slide easier one on each other. From my experience, the right spring is enough, but feel free to play around.</li><li>If some of the toothpicks are thrown, it means some of them are a bit too thin. You can dispense them better by releasing the push pad slower. :)</li><li>If at some moment it stops from giving toothpicks, it can happen that the feeding zone is blocked by two toothpicks (usually because some toothpicks are smaller/bigger, damaged, askew etc). It's easily fixed by shaking a bit the whole model and/or press harder on the push part.</li><li>The parts are finely designed to work together, so I suppose it's important to have a good filament and calibrated. Please use my tested profile.</li><li>You can choose from two different lids (in the main profile, more lids in a separate profile - Optional Lids). The “Yoda” lid is a separate plate as it's using AMS and 2 colors.  You can print it without AMS and leave empty space in the lid where letters and Yoda is (don't print the letters and Yoda).</li><li>I've added another profile (For Thinner Toothpick - only base part) containing only the base part for cases where your toothpicks are often flying out of the dispenser. This is usually a problem related too thin toothpicks. This part is only the base part which should handle such toothpicks.</li><li>Based on the review of eric.joschko (thank you!!), he scaled everything to 108% and everything works perfect for he's toothpicks which i understood they are 68mm length.</li><li>Based on review of Sven_fretz (thank you!!): “scaled everything up to 125% and it works fine with my 80mm toothpicks.”</li><li>For better spring action and to be sure they keep their power better in time, you can print only the springs with PETG.</li></ul>This is the building video (1min 30sec minutes ): <a target="_blank" href="https://youtu.be/BJucPYljE2o" rel="nofollow noopener">https://youtu.be/BJucPYljE2o</a><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=BJucPYljE2o"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/BJucPYljE2o" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;If you like this model, please check out my new Salt & Pepper dispensers: <a target="_blank" href="https://makerworld.com/en/models/228050#profileId-245632" rel="nofollow noopener">https://makerworld.com/en/models/228050#profileId-245632</a><figure class="image image_resized" style="width:56.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-03-06_0e2805d6f36fc.jpg"></figure>&nbsp;Or, my fun and easy to print, easy to use filament cutter: <a target="_blank" href="https://makerworld.com/en/models/137257#profileId-149353" rel="nofollow noopener">https://makerworld.com/en/models/137257#profileId-149353</a><figure class="image"><a href="https://makerworld.com/en/models/137257#profileId-149353" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/682841/2024-01-15_0a30aa152023c.png"></a></figure>&nbsp;Disclaimer: YOU ACKNOWLEDGE, BY YOUR USE OF MY MODELS, THAT YOUR USE OF THE MODELS IS AT YOUR SOLE RISK.<h2>LIMITATION OF LIABILITY</h2>UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL OR EQUITABLE THEORY, SHALL THE DESIGNER OF THE MODELS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL LOSSES OR DAMAGES OF ANY NATURE ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE MODELS OR 3D PRINTED MODELS.

Toothpick Dispenser - all parts printed

Home

V3 Precision

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.&nbsp;Printing RecommendationsI used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.The gears are easy to print and require no support or post processing.The bases need some support and did well with tree (auto) and threshold angle of 30.I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.&nbsp;AssemblyMost of the assembly is easy and self-explanatory.Note that the rear driven gear is reverse threaded.Specific instructions can be found in an upcoming Instructions Video …….There will also be a link to the video on the V3 Precision website.&nbsp;#best3dp2023<figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Filament Spool Winder

Love Prints

**Please Rate our Print Profile/Design When complete ****good or bad we like to know** SantaLightboxBig man inspired We Recommend - UK COB LED strip: <a target="_blank" href="https://www.amazon.co.uk/dp/B09D7DH376?psc=1&ref=ppx_yo2ov_dt_b_product_details&_encoding=UTF8&tag=cariadprints-21&linkCode=ur2&linkId=e5f6db63799950a7b1ab1f32b3fa20c3&camp=1634&creative=6738" rel="nofollow noopener">COB LED's</a> All of our models are available in 3MF Format You can change the colour with easeYou can change the size with easeWe also include STL Files for those without a Bambu Labs Printer Additional Files included:White DiffuserHanging Rear Plate with CutoutRear PlateRear Plate with Cutout3.6mm Inserts Print Face Down on a Textured PEI Plate for best results Please check out our other designs<a target="_blank" href="https://makerworld.com/en/u/2913704375?orderBy=downloadCount" rel="nofollow noopener">https://makerworld.com/en/u/2913704375?orderBy=downloadCount</a> If you are feeling generous you can buy a coffee: <a target="_blank" href="https://www.buymeacoffee.com/cariadprintsltd" rel="nofollow noopener">https://www.buymeacoffee.com/cariadprintsltd</a> <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=Y5FCT47XB5C9Y" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=Y5FCT47XB5C9Y</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/163147/2023-11-11_97b9d6522e6a8.png"></figure>

Santa - Lightbox

xmas

boltboard

lindnjoe

A 4 Piece pumpkin decoration. The black all snap together and the orange piece needs glued to the black outline piece.

4 Piece stacked pumpkin decoration

Halloween 

KYZ Design

This was originally uploaded <a target="_blank" href="https://www.printables.com/model/384997-honeycomb-storage-wall-hsw-bambu-x1cp1p-max-wall-p" rel="nofollow noopener">here</a>, check it out to see past makes and comments--Honeycomb Storage Wall's wall piece - remixed to max out the usable plate on the Bambu X1/X1C/P1P252x248 is the biggest possible but requires a bit of tinkering to print this, see here if you want to print this one: <a target="_blank" href="https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations" rel="nofollow noopener">https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitations</a>Otherwise, use the 252x224 one (see the slicer screenshot for where to place it on the plate)&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models including framed wall sections:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-10_f8b815429fd9d.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/253223/2023-12-09_19d31ded4922d.jpg"></figure>&nbsp;

Honeycomb Storage Wall HSW - Bambu X1C/P1P/P1S Max Wall Piece

Nils Kal

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_d8isth83q5cb.png" alt="NK"></figure><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_jeh5ijkl8akh.png" alt="banner"></figure> I'm currently playing death stranding on my PC and came up with the idea of recreating the „Odradek“ scanner as a desk light so I'd like to present you the "Desk Stranding" lamp (thanks to reddit user u/Typh_R who came up with the name). This is one of my biggest projects so far with a total of 37 parts needed (30 individual parts). I only used screenshots to recreate the original look as close as possible with keeping the printability in mind. I ended up with 4 different .3mf's, divided into their color style. All parts won't require any supports and you also won't need an MMU for this project, all color changes are layer based. There is a bit of assembly required, you'll find everything that's needed below!You can also use this as a cosplay prop if you are using batteries or a powerbank as the power source, there is still some space inside the main body for small power sources. All parts are labeled with a version number so you can easily detect any future changes! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_rb1gk5guxth2.png" alt="Manual"></figure> &nbsp;Note: Two lights are flipped in some pictures, the final version has got the correct original look!<h3> </h3>&nbsp; Features:<ul><li>Fully FDM compatible with no supports needed</li><li>On/off switch</li><li>Invisible wiring (wire channels through the hinges)</li><li>All lights are fully adjustable</li></ul> Hardware needed:<ul><li>0.25mm² wires (About 2 meters red and black)</li><li>Switch (21x15mm [punch hole is 13x20], standard size, like <a target="_blank" href="https://www.aliexpress.com/item/32921026422.html?spm=a2g0o.productlist.0.0.1c5313ce9bHl4M&algo_pvid=6a672913-6609-4980-9225-2778fcda0396&algo_expid=6a672913-6609-4980-9225-2778fcda0396-35&btsid=f061563d-0e5d-4e64-9179-2874cbf4c177&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_55" rel="nofollow noopener">this</a>)</li><li>Soldering tools</li><li>LED Strips</li><li>1x LED Diode Blue</li><li>Power Source</li><li>10x M3x4 Screw</li><li>15x M3x12 Screw</li><li>5x M3x20 Screw</li><li>21x M3 Nut</li><li>5x M4x20 Screw</li><li>5x M4 Nut</li></ul> Installation guide: <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_1zgcvcaj35py.jpg" alt="Qries"></figure>Click <a target="_blank" href="https://drive.google.com/file/d/1xE0kxJmfiwEKIVhW-_Ozk4rUgfkIppxT/view?usp=sharing" rel="nofollow noopener">here</a> for a detailed instruction manual (pdf file). This design is still subject to change so check back again for updates (I already made some changes after taking the pictures so they might differ from the printed version).Have fun with the lamp! As bonus, here is a little stop motion animation from the lamp in action:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_sl2qsjg41wfo.gif" alt="Buddy"></figure> +++++++++++++++++++++++++++++++++++++++++++++++++ &nbsp;If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also welcome and may check out my other designs! Happy printing!&nbsp; <figure class="image image_resized" style="width:7.73%;"><img src="https://makerworld.bblmw.com/makerworld/draft/377912/2023-08-24_y0rwyb5nz7o3.png" alt="NK"></figure><h3>Print instructions</h3><ul><li>All parts are optimized for FDM printing.</li><li>Please use a 0.4mm nozzle (or smaller).</li><li>I advise to use the .3mf (or gcode) files, as all parts are already aligned and ready to print. However, I’ve provided all .stl files as well!</li><li>Print in PETG for better durability</li></ul>&nbsp;&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Desk Stranding - The Death Stranding Desk Lamp

neat

zemistr

With nozzle 0.4 mm you can set external perimeters to 0.99 mm and layer height up to 0.3 mm.With nozzle 0.6 mm you can set external perimeters to 0.99 mm and layer height up to 0.44 mm.

Trash bin (in vase mode)

trash

The Crafty Maker

Joining the Star Wars Original Trilogy planet shadow boxes is this awesome Endor shadow box. Depicting the 2nd Death Star being built high in the sky.I've used the following colors:<ul><li>Plate 1: Geeetech PLA Black</li><li>Plate 2: PolyMaker PolyTerra PLA Army Dark Green</li><li>Plate 3: Prusament PLA Galaxy Green</li><li>Plate 4: Geeetech PLA Black</li><li>Plate 5: FormFutura EasyFill ePLA Turquoise Blue</li><li>Plate 6: 3DJake ecoPLA Pastel Green</li><li>Logo: Geeetech PLA Black + Geeetech PLA White (multicolor)</li></ul>The colors are just guidelines, you can get creative with the color scheme for a personal touch.&nbsp;It consists of 6 numbered plates.&nbsp;I've also added an updated Star Wars logo that you can attach to the shadow box. This version has a sturdier hook to attach to the box.&nbsp;You can find the box to display this set here: <a target="_blank" href="https://makerworld.com/en/models/13471" rel="nofollow noopener">https://makerworld.com/en/models/13471</a>&nbsp;The box with lid and the wall mountable box are both Patreon/Printables/Thangs subscriber exclusives. (Box with lid also available for individual purchase on <a target="_blank" href="https://cults3d.com/en/3d-model/art/shadow-box-with-lid-thecraftymaker" rel="nofollow noopener">Cults3D</a>)&nbsp;Print settings &nbsp;Plates<ul><li>No supports</li><li>100% infill</li><li>Arachne wall generator recommended </li><li>For smooth top finish you could use ironing or print, on smooth buildplate, face down.</li></ul>Logo<ul><li>Basic supports with top Z distance of 0.24 100% infill</li><li>Arachne wall generator recommended</li></ul>ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a <a target="_blank" href="https://patreon.com/TheCraftyMaker" rel="nofollow noopener">The Crafty Seller Patreon</a> subscription.

Star Wars Endor Shadow Box (A)

agepbiz

IDEX/Multimaterial version. Single extruder version: <a target="_blank" href="https://www.prusaprinters.org/prints/77500-print-in-place-and-articulated-f14-jet-fighter-wit" rel="nofollow noopener">https://www.prusaprinters.org/prints/77500-print-in-place-and-articulated-f14-jet-fighter-wit</a> Stand: <a target="_blank" href="https://www.prusaprinters.org/prints/59711-print-in-place-and-articulated-f14-jet-fighter-wit" rel="nofollow noopener">https://www.prusaprinters.org/prints/59711-print-in-place-and-articulated-f14-jet-fighter-wit</a>Print-in-place and articulated Jet Fighter for IDEX or Multimaterial 3d printers. The body with camopattern (color_01 and color_02) was printed as one part on a IDEX 3d printer while the canopy (canopy_separate) was printed separately and glued in place. If you have more than two colors you will be able to add the canopy (color_03) as a part of the multimaterial print. The wingtips has integrated supports and snaps of: <a target="_blank" href="https://youtube.com/shorts/SNWnS3XnjX8" rel="nofollow noopener">https://youtube.com/shorts/SNWnS3XnjX8</a> Subscribe or follow me on: Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a> Printsettings: IDEX 3d printer or Multimaterial No support No raft 0,15mm-0,2mm layer height 35-45mm/s *The print in the photo was printed slightly upscaled WARNING: CHOKING HAZARD - Small parts Not for children under 3 yrs.&nbsp;This model was created by Stian Ervik Wahlvåg (agepbiz) and is licensed under the Creative Commons - Attribution - Non-Commercial - No Derivatives license

Print-in-place and articulated F14 with Camo - Multicolor

toys

Chris Pirillo

In a distant galaxy, a stormtrooper named TK-3A7 found an unexpected path to fulfillment. Full-filament? While on a mission, he became separated from his comrades on the desert planet of Tatooine. Lost and weary, he stumbled upon a humble bakery owned by an elderly baker known as Old Warrd.&nbsp;TK-3A7 sought refuge in the bakery, and under Old Warrd's guidance, he discovered a hidden talent for baking. Kneading dough and creating delicious pastries brought him newfound joy. As time passed, TK-3A7's presence in the bakery became a familiar sight, and locals grew fond of the stormtrooper-turned-baker.&nbsp;Word of the extraordinary bakery spread, reaching even the Emperor's ears. Impressed by TK-3A7's transformation, the Emperor granted him a full pardon and the opportunity to open his own bakery in the Imperial capital. Grateful for this chance, TK-3A7 embraced his new role, naming his bakery "The Galactic Oven."&nbsp;TK-3A7, once a fearsome soldier, now baked his way into the hearts of people across the galaxy. His story proved that remarkable journeys can emerge from the unlikeliest of circumstances.&nbsp;Image generated in MidJourney. &nbsp;I sliced this at a .08mm layer height.<ul><li>Black to layer 4</li><li>Dark grey to layer 17</li><li>Light grey to layer 28</li><li>White to layer 39</li></ul>

Star Wars (Inspired) "TK-3A7" HueForge Stormtrooper Helmet

hueforge 

Bambu Lab

A1 mini test model - Screw Gauge by Bambu Lab

Screw Gauge by Bambu Lab

tools

RainerBavaria

i designed a Buildplate-holder for 7 Plates , designed in Stairs so you can see the front of every plate for reading or seeing the desing.&nbsp;I designed in 2 parts so it fits on the printbed at once.i desinged conectors as well , i did not need any glue for fitting it .i printed standing on the Bambu-Logo→ less filament changes ,also then is no support needed.printed in 0.20 layers , 2 perimeters , 3Bottom/Top.i did a pause before th toplayers and fill some steelballs in for some wight, so i used grid-infill 10%.&nbsp;&nbsp;

Buildplte-Holder  X and P Series

Bambu accessories 

squinn

A portable cable organizer which is setup as an easy print-in-place and includes a knob on the side for conveniently winding up the cable when you're ready to pack it away.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_fd01d80e216de.gif"></figure>This model is an easy print that requires no supports, and three different sizes are provided to accommodate cables of different lengths. If you're not sure which to choose, I'd recommend starting with the “medium” size.&nbsp;After printing, you'll want to place the cable within the groove at its halfway point, close the lid (which is intentionally designed to close tightly), wind up the cord clockwise using the handle, and then extend by simply grabbing the cable by both ends.&nbsp;Update 2023-09-13:&nbsp;Alternative smooth-sided versions of all three sizes have now been added, and also the handle design was slightly adjusted to add a small fillet and chamfer to decrease the bridge distance. Here's a close-up picture of the updated handle on the knurled and smooth-sided versions:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_e75ea621224d08.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/76375/2023-09-13_68f2b35a6774b8.jpg"></figure>&nbsp;

multiboard

Wago

Tools

ESP

LED

AMS

filament

multiboard

desk

Toys

Home

filament

xmas

boltboard

Halloween

HSW

neat

trash

art

toys

hueforge

tools

Bambu accessories

organization