Akijay

SUPERNICE

Car Mini Spoiler Kit - If you like it, please download and use it and like it to support 👍Thanks！车辆mini 尾翼 - 如果你喜欢它，请下载使用并点赞支持 👍谢谢你！

Car Mini Spoiler Kit,Mini Tail Wing扰流板尾翼

Cars & Bikes

Reefer

I find that the poop catchers are all fantastic, but somehow too static. I thought about how to change that and this is the result. You can put the exhaust on both sides of the Bambu lab printer. Or wherever you feel like. You can choose the ejection direction yourself. Whether to the left, right, or rear, does not matter. Only upwards makes no sense, unless you connect a vacuum cleaner :-) It works amazingly well (at least for me) and takes little space. You can customize the length and you can also put it on or in a box. The external filament roll also still has enough space. I printed it with PETG because it's only 2 layers wide and I wanted flexibility so it wouldn't break when you put it together. It is important to position the opening of the catcher and holder well at the exit of the printer. I used double-sided tape, but the best tape is special mirror tape (I don't know the correct name for this tape, but it is used to stick mirrors to the wall).You will need a raft or brim when printing the segment and the catcher. Print it like on the 3d picture. The idea is not yet finished, so I make it available to the community with step files to play. Maybe there will be more ideas. Especially the holder seems to me to have potential for improvement. I wish all who deal with it a lot of fun and I'm happy about every make.

Poop Chute Pipe

print upgrade

thatcaddad

I designed an all screw version thats alittle cleaner design wise. You can find V2 of this model here. <a target="_blank" href="https://makerworld.com/en/models/444126#profileId-350360" rel="nofollow noopener">https://makerworld.com/en/models/444126#profileId-350360</a>&nbsp;This is a mini nuke deck box. The Deck Cavity is 76x76x100mm. This should fit most decks even double sleeved decks. The top screws on to the dice holder and the side holder sits on top of the deck box. I designed this to be supportfree. There is a long bridge that will be needed on the dice holder. Let me know if you would like to see a version with magnets.&nbsp;Update:Added an A1 Mini Version. Everything is the same except the I split the Main Part into 2 pieces and you can screw them together.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-20_66603f482af94.png"></figure>&nbsp;&nbsp;Here is a print from a person who downloaded it.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-28_b9cb5f0249a0f.png"></figure><figure class="media"></figure>&nbsp;Check out the mini nuke life counter as well. <a target="_blank" href="https://makerworld.com/en/models/484651#profileId-397051" rel="nofollow noopener">https://makerworld.com/en/models/484651#profileId-397051</a><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-06-04_dfc6b5724124e.jpg">&nbsp;Update:I received interest in a magnet version. I have added that and a single sleeved and a double sleeved version. Below are the magnets I picked to fit this box. let me know if you need different sizes and I will try and add them.I have not tested these magnets but I left a 3.5mm space for each one so they should fit fine.&nbsp;<a target="_blank" href="https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXYF5TR/ref=sr_1_3?crid=2ZXC110BQ5KN8&amp;dib=eyJ2IjoiMSJ9.7P__e0s3x6c8j41JiiKsEnQb7_Q6kScPEJdM9gNIk0HGESF_ejojzDVlv_BJfQjH3fFztw4HNtLeiaIk_Idv8RAYN6TJ6wtB6tW8U8JJFD4Jth8o8tf1mkryH8KQKFmfIsClnGM2d4UjFg-wm3TsNWenui5jFxGNKwZmOP1PyTlFprlznnf-m5rcwwYxTSIrMzoySd0TW-G3fPe7u4CtNSxnaM5LUXEbDP3tKjVapdc.zqoVrbeK-gbFNy5q3FNDf8NNvku96oJ-_FOXc_dKlIM&amp;dib_tag=se&amp;keywords=3x3%2Bmagnets&amp;qid=1709666170&amp;sprefix=3x3%2Bmagnets%2Caps%2C115&amp;sr=8-3&amp;th=1" rel="nofollow noopener">https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXYF5TR/ref=sr_1_3?crid=2ZXC110BQ5KN8&amp;dib=eyJ2IjoiMSJ9.7P__e0s3x6c8j41JiiKsEnQb7_Q6kScPEJdM9gNIk0HGESF_ejojzDVlv_BJfQjH3fFztw4HNtLeiaIk_Idv8RAYN6TJ6wtB6tW8U8JJFD4Jth8o8tf1mkryH8KQKFmfIsClnGM2d4UjFg-wm3TsNWenui5jFxGNKwZmOP1PyTlFprlznnf-m5rcwwYxTSIrMzoySd0TW-G3fPe7u4CtNSxnaM5LUXEbDP3tKjVapdc.zqoVrbeK-gbFNy5q3FNDf8NNvku96oJ-_FOXc_dKlIM&amp;dib_tag=se&amp;keywords=3x3%2Bmagnets&amp;qid=1709666170&amp;sprefix=3x3%2Bmagnets%2Caps%2C115&amp;sr=8-3&amp;th=1</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-05_0aa6982866d85.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-05_bb8d37468361c.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-05_f6bc788f2f1eb.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-05_3accc2effb57.png"></figure>Check out my other deck boxes:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212530/design/2024-03-22_ea4fb0b1abf0c.png"></figure><a target="_blank" href="https://makerworld.com/en/models/382812#profileId-284220" rel="nofollow noopener">https://makerworld.com/en/models/382812#profileId-284220</a>&nbsp;

Fallout MTG Mini Nuke Deck Box

I made these for my girlfrind, redu to print with a 0.2mm nozzle.&nbsp;Credit to https://www.thingiverse.com/doesa/designs

Rose Earring

Bijoux

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

Party game

IXPatch

This is a Charizard sculpture based on its original artwork on the cover of the (western version of) Pokémon Red Version. It was originally meant to be a display stand for a Game Boy cartridge. However, since I didn't want to stray too far away from its iconic pose, I refrained from having it hold the game in its claws or adding any conspicuous brackets. Instead, I just moved the tail out of the way a bit so that a game cartridge can be angled against it.In addition to the regular single-color version, I have also included a painted multicolor version for Bambu Studio.

Retro Charizard - Pokémon Red Version Artwork

Figure

SpectreGadget

If you like this model, please throw me a like. Designing these models takes time, filament, and caffeine. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=AESRCQSQW6TS2" rel="nofollow noopener">If you want to support my work, please buy me some caffeine.</a> Thanks!&nbsp;Same model, just 'painted' using BambuStudio for printing on BambuLab printers with an AMS for four color printing. I used Microcenter Inland brands: White PLA+, Blue PLA+, Black Silk PLA , Silver Silk PLA, True Red PLA+BTW, I painted silver in the panel crevices to give add additional depth to the model when printed. Not really ‘standard’ but i like out it came out.Best to optimize your flushing volumes! With tuning, this model's print time can be reduce by hours with optimized flushing volumes.&nbsp;*Update 7/29/23 - Updated R2D2.3mf to include the leg and foot pins I created and used on mine. For the middle foot, I just used some wire. Added the two files separately for easier download.

R2D2 Alexa Echo Dot 3 Dock (Colored for AMS)

Star Wars

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>