Airitech Creations

KyuubiNight

<div><h1>Summary</h1><div>This is my holiday sculpt for this year! I decided on a Krampus as there is a character design challenge on Facebook as well. The file does need some support under the tongue (oversite on my part!). Otherwise, the rest of the model is supportless. MMU is included as well. </div></div>

Chibi Krampus Ornament 

Ornaments

Silver Harmony Studios

I wanted a holder for all my hobby brushes and hobby files so I made this. It is able to hold up to 28 brushes, 32 hobby files, a small cubby for additional tools (mine is filled with nail files for hobby sanding), and a holder for a mason jar for washing your paint brushes. It comes in 2 parts and you can just snap them together without glue. Brush Diam (Max): 10.5mm Hobby File Diam (Max): 3.4mm&nbsp;Base Dimensions: L: 296mm W: 136mm H: 101.5mm&nbsp;Turntable: <a target="_blank" href="https://youtube.com/shorts/LGqGBW4o_fU" rel="nofollow noopener">https://youtube.com/shorts/LGqGBW4o_fU</a>&nbsp;&gt;DO NOT resell/sell it by itself &gt;DO NOT redistribute this asset freely, please simply redirect them to this page &gt;DO credit me if you use it

Brush and Hobby File Holder

Model Making Tools 

The_Lightntng_Duck

Dungeons and Dragons centaur barbarian“sick of using dice as miniatures? then try this!”30 mm scale raised axeany print profiles will be appreciated since I do not have a bambu lab printer and cannot use bambu slicer

Dungeons and Dragons centaur barbarian miniature

TableTop

hildi3d

Deadpool Voodoo doll. Swords and no swords versions.

Deadpool Voodoo

Toy Art

Maker Dave

I finally broke down and mounted a Peg Board for my Tools in my garage. I picked up a 4x8 peg board from Home Depot and 2x1 strips of wood and mounted it to my wall in the garage. Then I started to design custom hangers for my Ryobi tools. The hangers should work with most tools.

Peg Board Power Tool Mounts - Ryobi and Others

Shop

Ghislain

Postcard stand or display holds a little under 50 postcards!

4.2" x 5.5" Postcard Display

Vendor Displays

wotfan

I recommend printing with a .2mm nozzle at .14mm layer height.&nbsp;The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive).

Multicolor Underdog Magnet

Magnets

JAV-3D

3D-Druckanleitung: Miniatur-Bowlingbahn-Set mit Print-in-Place-AufbewahrungsboxEinführung: Erleben Sie mit dem 3D-gedruckten Miniatur-Bowlingbahn-Set eine unterhaltsame Mischung aus Kreativität und Spielspaß. Diese detaillierte Anleitung führt Sie durch den gesamten Druckprozess und bietet nützliche Tipps für eine reibungslose Umsetzung.Teil 1: Bestandteile des SetsStellen Sie sicher, dass Sie alle Teile des Sets ausdrucken:<ul><li>Die realistisch gestaltete Bowlingkugel für präzise Würfe.</li><li>Die 10 sorgfältig gestalteten Bowlingpins für ein authentisches Bowlinggefühl.</li><li>Die speziell entworfene Aufstellhilfe, um den perfekten Abstand der Pins zu gewährleisten.</li><li>Die Print-in-Place-Aufbewahrungsbox, die nicht nur für einen bequemen Transport, sondern auch für eine sichere Lagerung sorgt.</li></ul>Teil 2: Druckeinstellungen und FilamentwahlVerwenden Sie eine 0,4 mm Düse und wählen Sie Ihr bevorzugtes Filament. PLA bietet Flexibilität, während ABS eine robustere Option ist. Passen Sie die Druckeinstellungen an, um die beste Druckqualität zu erzielen.Teil 3: Druckprozess für jedes BauteilDrucken Sie die Bowlingkugel, Pins, Aufstellhilfe und die Aufbewahrungsbox separat aus. Achten Sie darauf, die Druckparameter gemäß Ihren Präferenzen zu konfigurieren.Teil 4: Nachbearbeitung und MontageEntfernen Sie sorgfältig alle Stützstrukturen und überprüfen Sie die Bauteile auf Druckfehler. Montieren Sie die Bowlingbahn, indem Sie die Aufstellhilfe, Pins und Kugel entsprechend anordnen.Teil 5: Individuelle Gestaltung und LackierungExperimentieren Sie mit verschiedenen Filamentfarben, um Ihre Bowlingkugel und Pins einzigartig zu gestalten. Feine Pinseldetails können für eine realistischere Optik hinzugefügt werden.Teil 6: Spielerlebnis und AufbewahrungGenießen Sie spannende Bowlingmomente auf Ihrem Tisch. Die Aufbewahrungsbox eignet sich nicht nur für den Transport, sondern schützt die Bauteile auch vor Staub und Beschädigungen zwischen den Spielen.Teil 7: Teilen Sie Ihre ErfahrungenTeilen Sie Ihre Druckeinstellungen, Designvariationen und Spielerfahrungen mit der Community. Ermutigen Sie andere, ihre eigenen einzigartigen Bowlingbahnen zu erstellen.Zusammenfassung: Das Miniatur-Bowlingbahn-Set bietet ein faszinierendes Zusammenspiel von 3D-Druckkunst und unterhaltsamem Spiel. Diese Anleitung ermöglicht es Ihnen, nicht nur ein beeindruckendes Set zu erstellen, sondern auch Ihre kreativen Ideen einzubringen und mit anderen zu teilen. Viel Spaß beim Drucken und Spielen!&nbsp;&nbsp;English Translation:&nbsp;3D Printing Guide: Miniature Bowling Alley Set with Print-in-Place Storage BoxIntroduction: Experience a delightful blend of creativity and gameplay with the 3D-printed Miniature Bowling Alley Set. This comprehensive guide takes you through the entire printing process and provides useful tips for a smooth execution.Part 1: Components of the SetEnsure you print all components of the set:<ul><li>The realistically designed bowling ball for precise throws.</li><li>The 10 carefully crafted bowling pins for an authentic bowling experience.</li><li>The specially designed setup aid to ensure the perfect pin spacing.</li><li>The print-in-place storage box, offering convenient transport and secure storage.</li></ul>Part 2: Print Settings and Filament ChoiceUse a 0.4 mm nozzle and choose your preferred filament. PLA offers flexibility, while ABS is a sturdier option. Adjust the print settings for optimal print quality.Part 3: Printing Process for Each ComponentPrint the bowling ball, pins, setup aid, and storage box separately. Ensure to configure print parameters according to your preferences.Part 4: Post-Processing and AssemblyCarefully remove all support structures and inspect the components for printing errors. Assemble the bowling alley by arranging the setup aid, pins, and ball accordingly.Part 5: Customization and PaintingExperiment with different filament colors to make your bowling ball and pins unique. Fine brush details can be added for a more realistic appearance.Part 6: Gaming Experience and StorageEnjoy exciting bowling moments on your table. The storage box is not only suitable for transportation but also protects the components from dust and damage between games.Part 7: Share Your ExperiencesShare your print settings, design variations, and gaming experiences with the community. Encourage others to create their unique bowling alleys.Summary: The Miniature Bowling Alley Set offers a captivating interplay of 3D printing artistry and entertaining gameplay. This guide allows you to not only create an impressive set but also contribute your creative ideas and share them with others. Have fun printing and playing!

Mini Table Bowling Set

Games

yente.vanschaik

The width of the spool is 25mm, and the thickness of the middle stand is 10mm. so you can calculate yourself how long it is needed, if you want the rack to be perfectly filled.&nbsp;For the shaft: You can easily shorten or extend it yourself in your slicer. I used this length. I suggest printing it solid

Filament display rack

FDM Printing Tools

tbobwu

This is Ashton's first TinkerCAD project. looks great with three color printing on Bambu X1C

Simple chess board

Chess

Joshua.loebenberg2

Designed this for a colleague upon a request for his office space. I figured I put the work in, might as well throw it on Maker World for anyone else to enjoy. Can add/print additional hooks for double sabers and such.

Light Saber Wall Mount with Hooks

Decor

wazza10

Business card holder in the shape of a skull

Skull business card holder

Office

The Philosopher

Picture this: you&#39;re home by yourself, sitting on your porcelain throne, and you are ready to depart from your bathroom when you instinctively reach to the side. You reach for it again, but to your dismay, nothing is there, and you slowly look over. Could it be? Could you really have ran out of toilet paper? Now what??? Teepee ensures that this will never happen again. with a modular stacking system, the only limit to how many rolls you can store is your ceiling height. You can use teepee in two configurations, with a receptacle at the bottom that will hold the roll, or with a dispenser and rods for each roll that allows you to use it as a regular toilet paper holder which can “eject” the roll automatically when it is empty, allowing the next full one to automatically roll into the dispenser.&nbsp;This system should work with 99% of toilet paper rolls, however I have included the f3d file just in case, so the size can be increased. You could also just scale the model up, which should work just as well.&nbsp;&nbsp;Printing &amp; Assembly:&nbsp;Printing requires a very small amount of supports for the bottom of each straight piece, as well as supports for the curved portion if you choose to not split it.&nbsp;As for assembly, any strong glue should suffice, or as an alternative you could spot weld the pieces together. To attach the entire thing to your wall, I would recommend either tape or some sort of adhesive, to prevent making a hole in your wall.&nbsp;I have also included a test print, as this entire project is filament intensive, it is a good idea to make sure that each piece will fit together properly before printing the whole thing.  Notes:&nbsp;The dispenser with the ejection system is still quite hairy, and depends on the toilet paper roll. I am working on a more consistent version, but for now I would suggest printing both the receptacle and the dispenser to see which one works better for you. As always, feel free to modify the model as you need, I can provide any other files.&nbsp;To use the ejection system, you must print a rod for each roll you wish to use at any given time, and slide them into the holder. This ensures that each new roll is able to spin freely in the dispenser.&nbsp;Want More? Check out my modular dispensers! https://makerworld.com/en/models/412523

Teepee: Modular Bathroom Crisis Prevention System

Household

Arjen

Introducing Quack, your adorable and whimsical 3D printed rubber duck companion! With these fun and charming 3D printing files, you can bring a touch of playful joy into your home, office, or wherever your imagination takes you.&nbsp;Crafted with meticulous detail, Quack captures all the endearing features of a classic rubber duck, from its round body to its cheerful beak and expressive eyes. Whether you&#39;re a fan of bath time nostalgia or simply looking to add a delightful accent to your space, this charming figurine is sure to bring a smile to your face.&nbsp;These 3D printing files are designed for easy printing on most standard 3D printers, allowing you to create your own Quack in no time. Experiment with different colors and materials to customize your rubber duck to suit your style and preferences.&nbsp;Quack isn&#39;t just a charming decoration; it&#39;s also a versatile companion for a variety of settings. Whether perched on your desk, floating in a decorative bowl, or adorning a shelf, Quack adds a playful touch to any environment.&nbsp;Perfect for kids and adults alike, Quack is more than just a rubber duck – it&#39;s a symbol of fun, imagination, and the simple joys of life. So why wait? Dive into the world of 3D printing and bring Quack into your life today!

Duck Quack (Multi-/Single Color)

Minis

Llλmbda

Edit: added a second plate for Lid without supports as requested by user, added new plate for different orientation of spots, added new plate for one piece flower body if anyone wants to AMS multicolor it Yet ANOTHER Mario themed piggy bank model! This time we have a GIANT 2ft tall piranha plant floor bank! This model was originally meant to be a coin sorter as well but after many failed iterations I decided to just have it be a spiral ramp as all the designed I tried I could not acheive 100% success on the coin sorting. This piggy bank is LARGE and has many parts!  This is not meant to be a toy or moved around constantly and is meant more as a floor decor piece that you can throw loose change into as you walk in. Printing in orientation provided will be successful but will leave some slight blemishes on the underside of the rounded edges. Once everything is assembled these areas are hardly noticeable so its user choice of if you would rather have a slightly wonky bottom that can probably be nailed with great supports, or a seam where you glued the pieces together. Cut versions are provided on seperate plates All connectors have a tolerance of .2mm and should fit easily into the provided holes, glue both halves of the ramp together as well as the bottom piece. Glue your spots onto your flower body, then attach the plant lips to the flower body, mine fit so snugly in place I didn't even have to glue it. Slide your flower body over the top of the coin funnel and it should fit into place with some slight persuasion, once that is seated and glued you may then add the top of the coin funnel to the ramp. Glue your teeth in place and youre good to go!  If you're worried about stability you can glue the entire vine into the top of the lid to hold it in place. Happy Printing!

Mario Piranha Plant Large Spiral Piggy Bank

Piggy Banks

ceskoucestou

Contains 2 versions:<ul><li>AMS ready for multicolor print</li><li>STL version for classic layer color change</li></ul>&nbsp;Default size 100x3mm&nbsp;Recommend:<ul><li>Nozzle: 0.4 mm</li><li>Layer height: 0.2 mm</li><li>Switch to Arachne</li></ul>I will be grateful if you look at the other models as well. Happy Printing.&nbsp;

Skull driver coaster

Coasters

Zthuee

Cyberpunk inspired cat ears that clip onto the headband.&nbsp;All models are the left side and have to be mirrored for the right. They print without support on the open side.&nbsp;The three STL files are the same base model with different details.  For those who want to make their own I added a clean STEP file.

Cyber Cat Ears

Cosplay & Props

PrintMastermind

Simple coloring of ChelseyCreatesThings's awesome model

Medical Rubber Duck (Multi-Color)

Nurse

3d_lizard

it&#39;s the perfect conversation starter for those who appreciate a good joke in unexpected places.

cigarettes plug

Car Stuff

iNkosi3D

Tiny mushroom with 1mm hole for drop earrings printed in three parts so choose your colour. These actuallt turned out way better than expected and make lovly eatrings. As with all things 3D printed they are scaleable however for earring charm size I would advise against using a 0.4mm nozzel at 0.8mm layer height (I tried and they did not turn out very clever)These were printed with 0.2mm nozzel on A1 MiniBBL silk filament &nbsp;

Mushroom

Earrings 

walbart1973

<h2>3D MODEL DESCRIPTION</h2>The organizer holds 7 hooks. But nothing stops you from changing it according to your needs. To edit, I post STP files that are recognizable by several programs and allow editing. (This could be Rhino or Fusion 360 for example) You need: - 2x Allen screws with a flat head M4x16 (as shown in the drawing and photo) - 2x neodymium magnets 10x2mm to make the doors close nicely.<h2>3D PRINTING SETTINGS</h2>The box was made for the Bambu P1P printer (WITHOUT AMS) due to the graphics embedded in the door. But I think that the shared files will allow everyone to make appropriate modifications to enable printing on other printers. Model printed in PLA, standard settings. ATTENTION; - Files with the 3mf extension are now READY TO PRINT. Nothing needs to be modified.

KEY CONTAINER, BOX, ORGANIZER

Chests, Containers and Boxes

Tomasz Janota | TomsDragonPaws

Dragon skull with a special ring thanks to which it can be used as a necklace, keychain or earrings<ul><li>0.4mm nozzle</li><li>0.2mm Layer Height</li><li>The head requires supports</li><li>Brim suggested</li></ul>

Dragon skull necklace keychain earring

Keychains

tedcorindustries

I printed in PLA, 0.20mm layer height on my X1C. Plastic lighter case for Bic Lighters. Tight fitting with a hole in the bottom to help release your lighter. Tested on a lighter with graphical sticker on it.

Bic Lighter Case

Functional Cases

theeightbitdad

Funko Pop out of box wall display.

Funko Pop Out of Box Wall Display

Funko

TripleGWorkshop

Fun decoration for Halloween. Included are Danger, Killer, & blank nameplates, Snaps together. No supports needed.&nbsp;Blank included - Remix ready!&nbsp;I printed these several times @ .20mm and 3 perimeters (for the bars) with no problems other that some stringing to deal with.It can be a little tough to line up those legs. I recommend starting on one side and working your way across. Once they are all in a little you can seat them all with some pressure. Remember- if you break a rung assembling it, the monster did it.

Escaped Monster Cage 2-piece Halloween Decoration - No Supports

Diorama Displays

MadP 3d

Filter Holder for Pouring Resin&nbsp;Holds a filter for pouring unused resin back into the bottle. Frees up a hand to avoid those “oops” moments. I have no 500g bottles, so I had to guess based on advertised dimensions. With the extensions, it fits the 1kg bottles.Pictures show V1. V2 of Model has been updated to have angled feet.&nbsp;PLA Pro .2 Layer height Supports on the holder and extensions&nbsp;If you like, likeEnjoy.

Filter Holder for Pouring Resin

Resin Printing Tools

mireplica3d

<div><h1>Summary</h1><div>Movement in all axis. Mini, standar and extralarge version. I'll reward the one who prints the longest one. 0.15 to 0.2 mm Layer 5 to 15 % Infill Support FreeFor extralarge version glue the parts is recommendedOptional Teeth 0.1 layer Under 55 mm/s</div></div>

Dune Flexi Sandworm. Print in Place. Support Free.

Articulated 

TheAustinZombie

Skull bowl with 100%, 50% x3, and 25% x10&nbsp;picture is 100% skull