Adirael

Hiro Koiso Racing

This model is designed to fit X1 and P1 series printers. HKR poop chute features interlocking leg to secure the chute to the printer body without extra hardware or magnets. ※Fitment Note: If you got X1, X1C and P1P in Feb 2023 and earlier (most likely built in 2022) , Your printer might have shorter legs than current version.  This can cause a printer to not sit level with the chute installed. How to tell if you have a early style short leg printer<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_177ad051bd84f.jpg"><figcaption>Print The chute and see if the round part of base can slid under the printer as pictured. If it goes like picture above, you have current style. no further action is required. If the chute base doesn&#39;t goes in, follow instructions. Scroll down for further information</figcaption></figure>  <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_0f1d75fb4cc6e.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_8219b55930c54.gif"><figcaption>Easy printing - It prints without support.</figcaption></figure>Removable bucket are easily access from front and available in 4 sizes.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_52e2e363fc345.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_ec5da20ffb566.gif"></figure> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_7002ac682aaca.jpg"><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model, please consider boosting it to support creator. 
Thank you!</boostcontent></boostme> 《Solutions for early short leg printers clearance issue 》 2 ways for fix - both methods raise the printer height to same as current version to correct clearance issue. So print whichever you prefer and install to an early style printer. (Files are available for download)<ol><li>Replacement TPU leg - Extended legs replace stock rubber feet. Print with TPU <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ab7611200d584.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_5d39951f13735.gif">  </li><li>PLA spacers - PLA or whatever rigid filament material you used to print the chute would work. They fit inside the leg pockets, use with stock Rubber feet <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_ac0d4c15d6753.jpg"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_e325c22380ea.gif">  </li></ol>Tip for leg replacement:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-05_828fd7817fbe4.jpg"><figcaption>Bring a leg to the edge one by one to replace. So you don&#39;t have to lay printer on side.</figcaption></figure>&nbsp;&nbsp;Checkout more HKR printer accessories: <a target="_blank" href="https://makerworld.com/en/u/2567436854" rel="nofollow noopener">https://makerworld.com/en/u/2567436854</a>&nbsp;・HKR Stackable Build Plate Storage: <a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener">https://makerworld.com/en/models/120963#profileId-130105</a><a target="_blank" href="https://makerworld.com/en/models/120963#profileId-130105" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_1f77d220d2196.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - No Bearing: <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener">https://makerworld.com/en/models/145321#profileId-158083</a> <a target="_blank" href="https://makerworld.com/en/models/145321#profileId-158083" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_119fd552797b3.jpg"></a>&nbsp;・Foldable AMS side mount spool holder - with Bearings: <a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener">https://makerworld.com/en/models/153090#profileId-167255</a><a target="_blank" href="https://makerworld.com/en/models/153090#profileId-167255" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000218121/design/2024-03-02_25f94a5385d15.jpg"></a>&nbsp;Happy printing!

HKR Interlocking Poop chute with removable bucket

Fletch

The Saturn V rocket miniature model developed by NASA to take astronauts to the moon. Some details were omitted due to how small they were or poor results after slicing. Available in both multicolor and single color. The rocket can stand vertically without any support once assembled.&nbsp;This model should fit all Bambu printers. You will need to move the model to the corner on the A1 mini to fit both the model and prime tower.&nbsp;Update 3/14/24 - <a target="_blank" href="https://makerworld.com/en/models/254506" rel="nofollow noopener">Added a stand to display the Saturn V rocket that can be found here</a>.&nbsp;NotesThe antenna is pretty small, be careful when removing from the kit. When pushing the antenna through the third stage, you can cut the tip off if needed. Do not cut the side that prevents the antenna from going through the third stage (the side that has an extra extrusion closest to the Saturn V label). Once the antenna is through the third stage, you can give it light tug to secure it in place.&nbsp;Assembly<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_0c0b17411535b8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_88e6226af64dd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c99b1d1591bfb.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_c63a7fd7539ff8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_725c5a900205e8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_a0f5646572fbd8.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_38eaf64fc600e.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/706290/2024-03-01_bf8c15a68b8df8.jpg">

IoT

P1S

Desk toys