ARdocy

Rilot Designs

I tried some of the other coolers available on Printables and the other place but none really felt like they did the job properly.I have access to a 3d scanner and so I took a scan of the Mini 3 Pro in the closed position and then made a duct system that fits perfectly over the air vents and clips to the arms.You will need an 80mm fan and 4 M3 bolts to mount the fan to the duct.Prints with no supports if oriented upside down.

DJI Mini 3 Pro cooler duct

Dji Drone

Robert ONeill

Mounts to the side and back of a Banbu x1 carbon printer. redirects the purge waist to the side. Into a removable bin.&nbsp;It has holes to mount a set of magnets that hold the removable bin in place.&nbsp;There are hole to mount with the screws around the poop shoot. I have found it better to mount with double sided tape. not using the holes. the screws are self tapping. these are problematic to put new screws.&nbsp;Two of the parts are meant to be glued together. Minimizing the support material needed. the part can be printed with minimal support.&nbsp;The edge rail help the filament not get stuck. If you open the STL the default orientation is not optimal.The design orientation is shown in the 3mf file.&nbsp;There are edge rim thickening to save on material but keep strong.&nbsp;The metal piece that came with the printer is intended to be mounted on the side. using the default screws and M3 nut pressed into the print. The print helps distribute the load. This extension will need support.&nbsp;A filament Y that goes around the corner is:https://makerworld.com/en/models/170250&nbsp;The magnets are 6mm dia and glued in. I used it for a long time without installing the magnets. But once installed bin homes nicely.

purge bucket, side mount, removeable poop chute, with side filament 

Bambu Parts

3Deekes

Another “Art Deco” Hueforge , this time it&#39;s StitchI think a lot of people might know someone who is a Lilo and Stich fan , this is a great idea for a gift for them :)&nbsp;The dimensions are 180x180 mm so it fits nicely in a square frame.&nbsp;I also made a frame you can print to use for this and my other Hueforge models :&nbsp;https://makerworld.com/en/models/194571&nbsp;&nbsp;The colours I used Black (Elegoo)→ Purple (Yayo)→ Ice Blue/Teal (Polymaker Polyterra)→ White (Elegoo)&nbsp;For this model I changed the thickness of the base layer, now it&#39;s 1 mm, this creates a much stronger/durable end result.I added a Height Range Modifier so that first 1mm gets printed at 0.2 layer height (instead of 0.04). This also results in a fast print result.&nbsp;&nbsp;If you want to slice the file manually for use without AMS or other printer please use these settings :&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 1mm&nbsp;Swap Instructions: Start with Black At layer #9 (1.32mm) swap to Purple At layer #22 (1.84mm) swap to Ice Blue/Teal At layer #27 (2.04mm) swap to Jade White for the rest.  Reminder : I share these works for free for hobbyists, you can even print them as gifts for friend and family.If you like my work: a Boost on Makerworld is always appreciated!&nbsp;Or if you want you could give me a tip or &#34;buy me a coffee&#34; on :  <a target="_blank" href="https://ko-fi.com/3deekes" rel="nofollow noopener">https://ko-fi.com/3deekes</a>&nbsp;If you are interested in selling any of my current and future releases send me a message to info@3deekes.be

Dji Drone

Bambu Parts

lexi