6klub

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>&nbsp;

Pokemon-Charmander (NO SUPPORT)

Pokemon

Tridense

Upgraded Biqu H2 V2 mount for Ender 3 V2- Improved stiffness for extruder gear engagement lever - Better printability&nbsp;Suggest using higher temperature resistant materials, for example PETG over PLA as PLA may sag a little due to being so close to the hotend

Biqu H2 Mount for Ender 3 V2

Ender 3

Hanti_3d

<h2>A simple filament clip which prevents the filament from unwinding reliably!</h2> I&#39;ve tested many filament clips in the past, but couldn&#39;t find one that I was 100% satisfied with. Out of this need I have designed this small clip!<h4> Fast and easy to print, prevents filament tangling for ALL spools!  </h4>Recommended to print the clip with regular PLA. Only requires 1 gr of filament an 4 minutes of print time!<h4> Recommend to also check my lastest version:<a target="_blank" href="https://makerworld.com/en/models/490880#profileId-404364" rel="nofollow noopener"> https://makerworld.com/en/models/490880#profileId-404364</a>  </h4>

Universal Filament Clip

Misc. Mods

ildarcheg

Box: AMMO BOX 9mm AMMUNITION STORAGE 50 ROUNDS AMMO CRATE 9 mmDimensions: 6” x 3” x 1 1/2”Includes: - base (lower) - lid (upper) - lid punisher edition multicolor (upper) - lid punisher edition single color (upper) - insert - front plate multicolor - front plate single colorMaterials PLA, PETG, ABS, CFMulticolor Vs Single Color If you have a single-color printer like Ender 3 use MONO version (lid and front plate). If you have a multicolor printer like Bambu with AMS use the non-mono version (lid and front plate) and paint in Slicer.&nbsp;<h2>100+ CALIBERS AVAILABLE ON CULTS3D 2 DESIGNS</h2><h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/bbox" rel="nofollow noopener">BBOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/bbox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812695/2024-04-04_2cc9e9200b0068.png"></a></figure>&nbsp;<h2><a target="_blank" href="https://cults3d.com/en/design-collections/ildarcheg/abox" rel="nofollow noopener">ABOX</a></h2><figure class="image"><a href="https://cults3d.com/en/design-collections/ildarcheg/abox" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/812695/2024-04-04_49d3cd51ef544.png"></a></figure>   Following calibers are also available: 9mm 9 mm 40 S&amp;W 40s&amp;w 40sw 45 AUTO 45 ACP 45auto 45acp 6.5 Creedmoor 6.5 CM 243 WIN 243win 5.56 556 NATO 270 WIN 270win 308 WIN 308win 300 BLK 300blk Blackout 8x51R 8x51mm R Lebel 41 REM MAG 41 Mag 6mm ARC 6mm 6.8 REM SPC 6.8spc 224 Valkyrie 224 22-250 REM 22-250rem 450 Bushmaster 450 30-06 SPRG 30-06 Springfield 38 SPECIAL 38 S&amp;W Special 357 MAGNUM 357mag 10mm 10 mm 223 REM 223rem 7.62x51mm NATO 7.62x51 30 Carbine 7.62x33mm FN 5.7x28mm 5.7x28 7.62x39mm 7.62x39 22 LR 22 LR Long Rifle 350 Legend 9x43mm 17 HMR 17hmr 22 WMR 22wmr 44 REM MAG 44 Mag 45 Colt 45colt 6.5 PRC 6.5prc 6mm Creedmoor 6mm 300 WIN MAG 300 win 28 Nosler 28nosler 7MM REM MAG 7mm 6.8 Western 6.8western 380 ACP 380 auto 300 WSM 300wsm 8x57 mm Mauser 8x57mm 8x60 mm 8x60mm 7.5x55mm Swiss 7.5x55 6.5x55mm Swedish 6.5x55 357 SIG 357sig 30-30 WIN 30-30win 9x18 Makarov 9x18mm 7x57mm Mauser 7x57 32 ACP 32 auto 50 AE 50 Action Express Desert Eagle 32 S&amp;W LONG 32 WadCutter 375 H&amp;H Magnum 375 Holland &amp; Holland 9.3x62 mm Mauser 9.3x62mm 300 PRC 300prc 7mm RSAUM 7mm Rem SAUM 500 S&amp;W Magnum  500sw 7.62x54R 7.62x54R Mosin 45-70 GOVT 45-70govt 300 RUM 300RUM 260 REM 260rem 22-243 22-243 Middlestead 44-40 44-40 WCF Winchester 280 REM 280 Remington 458 SOCOM 458socom 303 BRITISH 303british 25-06 REM 25-05rem 280 ACKLEY 280 AI 338 LAPUA 338lapua 338 WIN MAG 338winmag 220 SWIFT 220swift 32 French 7.65×20mm Long 7mm-08 Remington 7mm08 9.3x74R 9.3x74mm 7x64mm 7x64 mm 300 Savage 300savage 444 Marlin 444marlin 35 Whelen 35whelen 460 S&amp;W Magnum 460SW 454 Casull 454casull 6.5 Grendel 65grendel 270 WSM 270wsm 8x68S 8x68 S 26 Nosler 26nosler 300 WBY MAG 300 Weatherby Magnum 256 WIN 256 Winchester Magnum 7mm PRC 7mm PRC 25 ACP 25ACP 222 REM 222rem 300 NORMA MAG 300 NORMA MAGNUM 6mm Dasher 6mm 410 ga 410 ga 22 Hornet 22 hornet 38-55 Win 38-55 WCF 7x33 Sako 7x33 6mm XC 6mmXC 375 Ruger 375Ruger 7mm BR Rem 7mm Benchrest Remington 22 Savage 22savage 250 Savage 250Savage 7mm WSM 7mm 30-40 Krag 30 US Army 50 Beowulf Beowulf 7.62x25 Tokarev 7.62×25mm Tokarev Custom Lids Feel free to reach me if you are interested in custom lids--------- ammo box, ammo crate, ammo storage, ammunition box, ammunition storage, ammunition crate, 3d print, stl, 3d model, 9mm, 9 mm

AMMO BOX 9MM AMMUNITION STORAGE

Pew Pew & Co.

Falconwelder

270 degree door hinges for the K1 Max. While this was built from scratch, it&#39;s 100% inspired by Derrick Darrell&#39;s awesome design for the K1 <a target="_blank" href="https://makerworld.com/en/models/179285" rel="nofollow noopener">https://makerworld.com/en/models/179285</a>&nbsp;I tried to conform the hinges closely to the shape of the K1 Max housing and align the shape of the hinges to that of the arms. I also utilize heat inserts for mounting the arms to the brackets for easy removal.  You just remove the two bolts and the the door is off.&nbsp;There are two different arm lengths available. The extended version is only 1mm longer than the standard version. Choose which ever version provide the best door gap.&nbsp;BOMx2 - M3x6x5 heat inserts x4 - M3x4x5 heat inserts x4 - M3x16mm SHCS screws X2 - M3x50mm SHCS screws x2 - M3x12mm SHCS screws x2 - M3x8mm SHCS screws&nbsp;

K1 Max 270 Hinges 

K1 Mods

Fighttender

Block off plate for 2JZGE that are not running distributor anymore. &nbsp;Printed with 25% infill out of Polymaker Black ASA.&nbsp;Print is designed to accommadate a 30mm 1mmx1mm oring seal.&nbsp;Designed to be a tight fit. Oring is not needed as there is no oil pressure present at this location. If you live in extreme cold, recommend using the oring. &nbsp;If you have any issues with fitment I can tweak the design. I have been running for 1 year, no issues.

Toyota 2JZ Distributor Block Off Plate

Motorsports 

GamingFaxe

NOTE: You need to Print - Both 3MF from me! (4 Parts) Hey :) I remixed the “<a target="_blank" href="https://www.printables.com/model/361348-bambu-labs-carbon-x1-top-glass-riser-for-leds%20for%20easy%20printing" rel="nofollow noopener">Bambu Labs Carbon X1 Top Glass Riser for LED&#39;s</a>”Now you can print it without TPU and it works better, we made some updates to the file!1. 2x 3h printing time - 2 parts fit on the X1C. 2. no TPU needed anymore because we put the part together as one part. We now use 20x2mm EPDM tape as a base for the glass! This seals better, makes no noise and saves us the unnecessary TPU print! 3. we have adjusted the socket a bit so that we can better route the cable to the outside.To the parts list. 1. approx. 130cm 8mm COB Led strip 2. one power supply depending on what LED strip you bought (12/24V) 3. a dimmer if you want, we use an <a target="_blank" href="https://www.ebay.de/itm/254733020839?var=554520088749" rel="nofollow noopener">Alexa compatible dimmer</a>. 4. cyanoacrylate glue 5. 20x2mm EPDM (foam rubber) tapefor printing:You print everything from PLA, PETG, ABS in your Bambu Lab with a 0.2 er layer height and normal support (no tree structure please) Check the pictures to see how it should look. Always 2 parts just fit on the plate. Approx. 6h printing time for all 4 parts. (2x 3h)Assembly:We use the following &#34;<a target="_blank" href="https://www.ebay.de/itm/254995985456?var=554914076553" rel="nofollow noopener">COB LED strips</a>&#34; in addition a &#34;<a target="_blank" href="https://www.ebay.de/itm/303838576597" rel="nofollow noopener">24V 1A power supply</a>&#34; and the following &#34;<a target="_blank" href="https://www.ebay.de/itm/173065424528?var=471818882009" rel="nofollow noopener">EPDM tape</a>&#34; in 20x2mm. After printing, you clean up the parts roughly and just click them together, then you make a test whether it fits in the printer, it should lie flat in the printer without wobbling! If it does not fit, check your print for any warping....After everything fits, you now glue the EPDM tape in the upper edge, this normally requires no superglue (grease-free).Then you cut the appropriate lengths for your LED tape, this depends a bit on the divisibility of the strips.Now solder all 4 strips correctly at +/- together. Leave the cables between the LED strips about 3cm long.After soldering, insert the LED strips into the intended lip, this should work with an 8mm strip without any problems, we had self-adhesive LED strips, but we still secured it at each divisible point from above with a drop of superglue.Then let everything dry or use Activator Spray. Now you put the frame in the printer, the glass pane on top and then if necessary your AMS back on top. We deliberately built it so that we don&#39;t have to/want to do any wiring on the printer itself.If you want to do this, of course, it is up to you. We assume anyway in no way a liability, no liability for material defects or otherwise!Despite the disclaimer, we hope you have fun building! See you in the Makes!Nick from <a target="_blank" href="https://discord.gg/bEjqY8DEPb" rel="nofollow noopener">Filament Freunde - Discord</a> :) GERMAN: Hinweis: Ihr müsst beide 3MF´s von mir Drucken! (4 Teile insgesamt)&nbsp;Hey :) Ich habe es geremixed. Jetzt kannst du es ohne TPU drucken und es funktioniert besser, wir haben einige Updates an der Datei vorgenommen!1. 2x 3h Druckzeit - es passen 2 Teile auf den X1C 2. Kein TPU mehr nötig da wir das Teil als ein Bauteil zusammengefügt haben. Wir nehmen nun 20x2mm EPDM Band als Unterlage für das Glas! Das dichtet besser, gibt keine Geräusche von sich und erspart uns den unnötigen TPU Druck! 3. Wir haben die Buchse ein bisschen angepasst sodass wir das Kabel besser nach außen verlegen können.Zur Stückliste. 1. ca. 130cm 8mm COB Led Streifen 2. ein Netzteil jeh nachdem was du für einen LED Streifen gekauft hast (12/24V) 3. einen Dimmer wenn du möchtest, wir nutzen ein <a target="_blank" href="https://www.ebay.de/itm/254733020839?var=554520088749" rel="nofollow noopener">Alexa kompatiblen Dimmer</a>. 4. Sekundenkleber 5. 20x2mm EPDM (Moosgummi) Bandzum Druck:Du druckst alles aus PLA, PETG, ABS in deinem Bambu Lab mit einer 0,2 er Schichthöhe und normalen Support (bitte keine Baumstruktur) Schau in den Bildern nach, wie es aussehen sollte. Es passen immer 2 Teile gerade so auf die Platte. Ca. 6h Druckzeit für alle 4 Teile. (2x 3h)Zusammenbau:Wir nutzen folgende &#34;<a target="_blank" href="https://www.ebay.de/itm/254995985456?var=554914076553" rel="nofollow noopener">COB LED Streifen</a>&#34; dazu ein &#34;<a target="_blank" href="https://www.ebay.de/itm/303838576597" rel="nofollow noopener">24V 1A Netzteil</a>&#34; und folgendes &#34;<a target="_blank" href="https://www.ebay.de/itm/173065424528?var=471818882009" rel="nofollow noopener">EPDM Band</a>&#34; in 20x2mm. Nachdem druck bereinigst du die Teile grob und klickst sie einfach nur zusammen, dann machst du eine Probe ob sie in den Drucker passt, es sollte Plan im Drucker aufliegen ohne zu wackeln! Sollte dies nicht passen, überprüfe dein Druck auf eventuelles Warping...Nachdem alles passt, klebst du nun in den oberen Rand das EPDM Band, dies benötigt im Normalfall kein Sekundenkleber (Fettfrei)Dann schneidest du dir die passenden längen für dein LED Band zurecht, dies hängt ein bisschen von der Teilbarkeit der Streifen ab.Löte nun alle 4 Streifen korrekt an +/- zusammen. Lasse die Kabel zwischen den LED Streifen ca. 3cm lang.Nachdem Löten bringst du die LED Streifen in die vorgesehene Lippe ein, dies sollte mit einem 8mm Streifen problemlos gehen, wir hatten zwar selbstklebende LED Streifen, haben diesen aber trotzdem an jeder teilbaren Stelle noch einmal von oben mit einem tropfen Sekundenkleber gesichert.Danach lässt du alles trocknen oder benutzt Activator Spray. Jetzt setzt du den Rahmen in den Drucker, die Glasscheibe oben drauf und dann ggf. deine AMS wieder oben drauf. Wir haben es bewusst so gebaut, das wir keine Verkabelung am Drucker selbst durchführen müssen/wollen.Wenn du dies natürlich möchtest, steht es dir Frei. Wir übernehmen sowieso in keinster weise eine Haftung, keine Sachmangelhaftung oder Sonstiges!Trotz des Disclaimers wünschen wir dir viel Spaß beim Bau! Wir sehen uns in den Makes!Nick vom <a target="_blank" href="https://discord.gg/bEjqY8DEPb" rel="nofollow noopener">Filament Freunde - Discord</a> :)

Pokemon

Ender 3

Misc. Mods

Pew Pew & Co.

K1 Mods

Motorsports

P1 Mods