4x4ffsa

Sakul

My OneBlade attachments have started to fall apart, so I have designed some replacements. Hair length between 1 and 3 mm. Clip the back in first and then the front. <figure class="image image_resized" style="width:34.17%;"><img src="https://makerworld.bblmw.com/makerworld/draft/342553/2024-01-02_87a3ded2344b.gif"></figure>

Guide Comb Attachments for Philips One Blade 1-3mm

Shaver

SigmaT4

ConceptThis model allows to write two text : <ul><li>One from the front point of view</li><li>One from the top point of view</li></ul>It works better if the texts has roughly the same length but it is not mandatory.&nbsp;Special charaters are supportedExemple : “ALT key + 3” will draw a heart&nbsp;Parameters<ul><li>TextSup : The text to write from top point of view</li><li>TextInf : The text to write from front point of view</li><li>FontHeight : The height of the font.<ul><li>Because the texts has to do the same length, the smaller text will have bigger font height</li></ul></li><li>FontSpacing : Control the space between letters. <ul><li>0 - all letters are on top of each other, </li><li>1 - Normal spacing</li><li>Recommendation : 0.78 to allow letters to barely touch</li></ul></li><li>SupportingLine : Draw a line at the bottom of TextInf.<ul><li>This allow TextInf to have spaces</li><li>In millimeters</li><li>0 - disabled</li></ul></li><li>SmoothModel : Control the smoothness of the model<ul><li>This is very resource heavy. I don&#39;t recommand using it.</li><li>0 - disabled</li><li>1 - maximum</li></ul></li></ul>PrintingDepending on the actual text, you may need some support. (I now hate letters “E” and “G” lol)I recommand lowering layer height if you have a lot of overhangs.&nbsp;ByeIf you have good ideas of texts, please post a profile !

[Parametric] Two texts in one

Custom Name

thumbprint

Holder for 20x T18 style soldering iron tips commonly used for Hakko soldering irons.

Soldering iron tip holder T18/Hakko

Solder

Xander Designs

**NEW MULTI PART PROFILE ADDED**This profile is for Non-AMS printingMulti parts split onto 4 build plates for ease of single color printers.This model allows you to thread the lights in a loop through both tubes continuously. (Needing only 1 meter length strip light)&nbsp;🧬☣️T-VIRUS☣️🧬My Daughter is obsessed with Zombie Films and Games, so I thought why not make her very own T-Virus Light from her all time favorite film, Resident Evil.To add lights you&#39;ll Need 1.6m LED Strip Lights.&nbsp;If you want to see how i designed this with an iPad here&#39;s a video.&nbsp;&nbsp;&nbsp;For mine, I used 24v COB LED&#39;s but they do get quite hot, so just for safety reasons I wouldn&#39;t advise using them for an extended period of time as the filament could ‘possibly’ melt and we don&#39;t want that!&nbsp;Once you have the lights in place, you can then take the top piece and place it on the tubes, simply go ahead and secure it with a little bit of hot glue using a glue gun.For the Filament, I used Bambu Lab PLA Matte, but to get the best Glow I do recommend using Bambu Lab PETG Translucent for the Tube sections. <a target="_blank" href="https://uk.store.bambulab.com/products/petg-translucent?variant=40926167892028" rel="nofollow noopener">https://uk.store.bambulab.com/products/petg-translucent?variant=40926167892028</a>&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Resident Evil T-Virus Lamp

Lamps

casvg5

Just a simple funnel to aid in filling the AMS Drypod canisters with desiccant. It fits inside of the dry pod opening snuggle without having to hold it.

AMS Dry Pod Kit Funnel

Dessicant Holder

Halfway_Engineered

This parametric model can be adapted to fit any cupholder/cup combination while remaining support free. I have provided a selection of popular sizes as STL files and print profiles. If a custom size is needed you can either comment the cupholder and cup dimensions and I will upload the resulting model, or you can input your dimensions directly to the Fusion 360 file parameters by following the guide below.&nbsp;The bottom of the adapter is left hollow, so that it can double as a convenient car-trashcan if desired.&nbsp;I strongly recommend ABS or ASA if this will be left in the car long-term.&nbsp;Medium cupholder size based on 2012 Toyota Camry, as it is possibly the most average car.&nbsp;INSTRUCTIONS FOR PARAMETRIC EDITING<ul><li>Download the Parametric Cupholder Adapter.f3d file</li><li>Open .f3d file in Fusion 360 (File &gt; Open &gt; Open from my computer…)</li><li>Click “Modify” along top banner</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420841/design/2024-04-09_2dcc6f9110424.png">&nbsp;<ul><li>Click “Change Parameters” in pulldown menu</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420841/design/2024-04-09_7819cd3fa04c9.jpeg">&nbsp;<ul><li>Update parameters as measured using the guide below</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420841/design/2024-04-09_53f7f865484ff.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420841/design/2024-04-29_b215acd21db95.png"><ul><li>Click File &gt; 3d print in the upper left corner</li><li>With the 3d print menu open on the right side of the screen, click the cupholder body</li><li>Ensure that the “Send to 3d Print Utility” button at the bottom of the 3d print menu is unchecked, then click “ok” at the bottom of the menu</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000420841/design/2024-04-14_5f522a3d4253c.png"><ul><li>Enable “save to my computer” and then select the folder where you would like the .stl file saved.</li><li>Click “Save”</li><li>Open the generated .stl file in Bambu Studio</li><li>Print with 3 wall loops and 15% infill</li></ul>

Parametric Cup Holder Adapter (Support Free V2)

Cup Holder

Desmodromic

Love these hex pattern baskets, bins or trays for organizing things around the house. This one was a request from my spouse and is easily scaled vertically if you need to adjust the height. Just watch if you scale too short in the Z axis as the overhang on the hexagons gets rough. These are a little over 6 1/4" long, 4" wide and around 4-1/8" tall (160mm x 100mm x 105mm) on the exterior. I designed in strong corners and edges and some small support ribs on the long hex pattern surfaces. They print nicely in PLA and are efficient on filament, around 86g per basket. My recommended designer profile has 5 top and bottom layers for strength and speed. Print times are long due to the pattern but I like how they look and how lightweight they are.

Pantry Organizer Basket

Crate

ozarkexpeditions

<h2>Fully Customizable 6-Side Dice for Games, Decisions, or Date Night!</h2>Unleash your creativity and add a personal touch to your game night with our Customizable SCAD Dice! Designed for enthusiasts and gamers alike, these dice are fully customizable using new Parametric Model Maker right in MakerWorld, giving you the power to choose from a range of emojis, symbols, and words to create a truly unique gaming accessory. Whether you&#39;re looking to make decision-making more fun or just amp up your tabletop games, our dice are perfect for any occasion.  <blockquote><figure class="image image_resized image-style-side" style="width: 18.9%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000463568/design/2024-06-10_7825e1d7757f3.png"></figure>📢 Update V3: Our dice maker now includes the ability to have pips and custom text on the dice! This feature is designed for power users. To use it, simply enter &#34;pip&#34; in the custom text field, and the corresponding pips for that side will be rendered. Thanks for using the custom dice maker!</blockquote><blockquote>📢 Update V2: Now includes all of the available fonts on MakerWorld, along with other minor refinements! </blockquote><h3>How to Customize Your Dice</h3><figure class="image image_resized" style="width: 67.89%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000463568/design/2024-05-13_640f0a94939c8.png"></figure>Step 1: Choose Your Base Design - Start by selecting the type of dice you want to create, from tradition, emoji, or custom text.Step 2: Adjust the Size - Use easy sliding scales to change the size of the dice, chamfer percent, font size, text depth and more.  Step 3: Customize the Dice -<ul><li>Traditional: If you selected the traditional dice option, under the size setting you can adjust the size of the pip (dice holes) under the size settings.</li><li>Emoji: If you&#39;ve selected the Emoji route, please expand the Emoji section. This list is designed to make selecting emoji&#39;s very easy for example, you can create one that has different cuisine options to leave your dinner plans to chance!</li><li>Custom Text: If you&#39;ve selected the Custom Text route, please expand the Custom Text section. You can enter, words, numbers, or other emojis not provided in the previous dropdowns.<ul><li>Rotate your dice around to see if you need to update the text to be shorter or go back and change the font size to ensure all of the letters fit.</li></ul></li></ul>Step 4: Click Generate - Now spin around the model and ensure that all of the sides look exactly as you want them. Feel free to go back and make changes.Step 5: Click Download - Select the Download 3MF file option and you can send it to the printer in no time. Happy rolling your new favorite dice.<blockquote>If you would like to see more generative models like this one, give a thumbs up 👍, boost 🚀, and make sure to follow. 😊</blockquote><h3>Tips</h3><ul><li>More Details: If you select complex emojis for your dice, you may want to try the adaptive layer height setting to ensure it prints the detail as expected. While we designed this to work with the most standard 0.4mm nozzle, if you would like more intricate details, consider using a 0.2mm nozzle. </li><li>Mind the Margins: Ensure that your designs have enough margin from the edges of the dice. This helps prevent parts of your design from getting cut off during the printing process.</li><li>Mix and Match Elements: Don&#39;t hesitate to mix emojis or custom text to create unique and functional dice. This can add a fun twist to your gaming experience.</li><li>Check for Updates: Stay updated with MakerWorld for any new features or improvements in the Parametric Model Maker. These updates might offer new customization options or improved tools.</li></ul><h3>Examples of Custom Dice Use</h3><ul><li>Decision-Making Dice: Create a dice with options like &#34;Yes,&#34; &#34;No,&#34; &#34;Maybe,&#34; and other responses for fun decision-making.</li><li>Game-Specific Dice: Design dice with symbols or text specific to your favorite tabletop game, enhancing the gameplay experience.</li><li>Date Night Dice: Customize a dice with different date ideas or activities to make planning a date night more exciting.</li><li>Number and Letter Blocks: Make educational dice with numbers or letters to help children learn in a fun and interactive way.</li><li>Story Dice: Create emoji blocks for making up fun stories with your kids, similar to a Mad Libs game.</li><li>Building Blocks: Design building blocks with different symbols or text to add a new twist to your construction playtime.</li></ul><h3>Feeback Welcome</h3>I would like to eventually have the one-stop location for all dice making needs on MakerWorld, so I can&#39;t wait to hear your feedback and continue making this better. For now, there are some known limitations, but we can work together to make an amazing experience. We hope that MakerWorld adds more default fonts and font weights to their experience soon.&nbsp;

Custom Dice! Design Yours on MakerWorld

Dice

Alkerion

This part will replace the original rubber part on your AMS front rollers.<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/f6749349-d236-4bad-bd16-f3c6b045a2ab.webp"></figure>&nbsp;Having wider roller will make your spools turn faster, improving load/unload time, and also reduce a lot the filament respooling rewind failures.Silicone tube also improve the friction between roller and spools.&nbsp;I&#39;ve used silicone tube of 10/14 (ID/OD), you must ensure they are soft like rubber to provide a good grip with spools.These should be fine :&nbsp;https://www.amazon.fr/gp/product/B08PP6ZR64https://www.amazon.fr/sourcing-map-Caoutchouc-Hautement-Elastique/dp/B09X15S148&nbsp;Version 2 : Now in two parts, the center and two different sides depending if you have original AMS or Hydra Pro mod.This V2 has now a small rind on the sides to prevent tube to move and prevent the rollers to turn freely.&nbsp;Printed in PLA with 0.4 nozzle, 0.16 layer height and 0.4 line width.&nbsp;Instructions :This mod require the removal of the original rubber :<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/3b927881-9075-44c9-9390-bef1d3cc2b11.webp"></figure>&nbsp;Once removed, clean the roller (remove the glue residues as much as possible) :<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/7e411b2d-7804-4cc0-9042-c06228fd5529.webp"></figure>&nbsp;And insert the new CENTER part (no glue required) :<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/df93ed55-6f1d-420b-aa95-7ad6243bf306.webp"></figure>&nbsp;Then glue (two small spots are far enough) the sides :<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/95c54b73-ccf9-466a-bba7-f2229081ac39.webp"></figure>&nbsp;Insert the silicone tube :<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/23a2f20a-fa6b-4fe2-89a5-6e507260a9af.webp"></figure>&nbsp;Cut the tube :<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/e1ff495a-451d-40e0-b0d9-6e34bc044fbd.webp"></figure>&nbsp;Install inside the AMS and ENJOY !<figure class="image image_resized" style="width: 75%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000452104/design/b7ceec58-16dc-4b5b-8209-80341f675343.webp"></figure>&nbsp;

Bambu Lab AMS Ultimate Front Rollers

Bambu Rollers

CraftyFox3D

Display your children&#39;s names and birthdates with this miniature street sign decor piece. Modular design to suit your needs. One Name and Date per sign. &nbsp;See Instructions Below:&nbsp;A great gift idea for Mother&#39;s day, new parents or grandparents. It could also be used to display any other important life milestones.&nbsp;This display is modular and prints with very few supports. Each nameplate is attached with a rotating connector that prints in 2 parts and simply snaps together. Simply snap the rotating pieces together, locking them in place and then press-fit the name plates into the connector.<figure class="image image_resized" style="width:23.21%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451789/design/2024-05-02_d149b4663c078.png"><figcaption>Snap fit together and will rotate freely</figcaption></figure>&nbsp;Editing Nameplates&nbsp;The file has 3 sizes of name plates (4&#34;, 6&#34; &amp; 8&#34;). Choose which size will fit your name best and use the Text tool in the slicer to edit your text. The font used is Roadway font and can be downloaded for free at <a target="_blank" href="https://www.dafont.com/roadway.font" rel="nofollow noopener">https://www.dafont.com/roadway.font</a> (install the font for all users and relaunch Bambu Studio to add the font to your list) <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000451789/design/2024-05-02_3f3b5994558c1.png"><figcaption>Using the Text tool, you can adjust the name and date for the sign. adjust text gap to help text fit nicely in the space provided.</figcaption></figure>Colors are a single color change and is set up for AMS but could also be done with a manual filament swap.

Birthday Baby Name Street Sign Decor

Street Sign

Techro3D

Car headrest cup holder.&nbsp;Made for standard 33cl drink cans. (The inner diameter of the cup holder is Ø70mm)&nbsp;For a shaft of Ø12mm (The hole is Ø12.25mm)&nbsp;Distance from the center of the hole to the inside of the hook.View the image below.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437882/design/2024-04-21_152dbeafb71f9.png"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000437882/design/2024-04-21_670a0b9dd678d.png">

Car headrest cup holder | simple, handy and strong

Cup Holders

E.T.

<h2>Airless Ping Ball 3.0!</h2>&nbsp;New mesh, new strength.&nbsp;Prints with a 3 layer raft for ease of adhesion and easy support removal!&nbsp;While this ball is a little heavy for table tennis, it DOES work (slams not guaranteed). Other uses include: Works as a fantastic cat toy if you toss a bell in at 60% print completion (or by itself).&nbsp;If you wish to sell this commercially, look <a target="_blank" href="https://cults3d.com/en/3d-model/game/airless-ping-pong-ball-3-0" rel="nofollow noopener">here</a>&nbsp;Thanks!

Airless Ping Pong Ball 3.0

Dog Toy

Prince Prints

Vendor events are popping up around me this year and I wanted a cleaner look for pricing my 3d printed Items.I made this two-piece price marker to save on filament. Print the price you need and glue it to the stand. If there is a price you need that I do not have listed, send me a message and I will be happy to add it.

Price Kit 

Price

standitupstore

The famous Robert Planter

Mothers Day Pot - Mother and Child

Planters

OlleMark

The Button Fidget is relaxing and satisfying stress reliever with 4 buttons that can be pressed over and over. Its not the quietest fidget toy so be aware. :D&nbsp;No assembly is required because it was designed to be print in place.&nbsp;Printed with bambus standard settings as shown below:<img src="https://makerworld.bblmw.com/makerworld/draft/164135/2023-11-10_0c9addac88474.png"><img src="https://makerworld.bblmw.com/makerworld/draft/164135/2023-11-10_7902e10def753.png">

Button Fidget Print In Place

Fidget

Jeff Smith

The motor drive options for the V-Spooler that are out there are great, but for me they are a bit more than I am interested in spending. I wanted something that was lower cost, and in fact, had a few parts laying around like a creality stepper motor, cable, and 40mm fan that I had laying around. There are also a couple nice options folks have come up with to quiet the V-Spooler down, should check them out here on Makerworld.&nbsp;<figure class="media"><div data-oembed-url="https://youtube.com/shorts/G9EIm2ZMaKk"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=G9EIm2ZMaKk"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/G9EIm2ZMaKk" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>&nbsp;Disclaimer #1: I’m not a mechanical designer, but this seems to work well so far.I bought the following, and there are links for it from Amazon, or AliExpress, depending on how fast you want the parts and how much you want to pay.&nbsp;Disclaimer #2: As mentioned, I used a Creality 42-40 Stepper Motor that I had, a cable I had, and 40mm fan I had. The links below are for reference, there are a lot of alternatives. I didn’t use/purchase anything other than the DC Stepper Motor Driver with Control Module and the 12vdc power supply (though the power supply was bought a while ago for my filament dryer)&nbsp;Total from Amazon: ~$61 USDTotal from AliExpress: ~$35 USD (and it’s likely the exact same stuff from Amazon)&nbsp;DC Stepper Motor Driver with Integrated Control Module$26 on Amazon<a target="_blank" href="https://www.amazon.com/gp/product/B0C2PN6JB1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1" rel="nofollow noopener">DC Stepper Motor Driver with Controller Integrated Board DC 5~30V 4A Forward/Reverse Pulse Speed Angle Control Module Programmable PLC Serial Communication SMC02 Drive All-in-One for 42 57 Motor: Amazon.com: Industrial &amp; Scientific</a>$17 on AliExpress <a target="_blank" href="https://www.aliexpress.us/item/3256803378995316.html?spm=a2g0o.productlist.main.9.401a3e26OwBZIi&amp;algo_pvid=2553ee09-863a-4093-bd66-a5dcb482024f&amp;aem_p4p_detail=202404081414413052167654085920013512161&amp;algo_exp_id=2553ee09-863a-4093-bd66-a5dcb482024f-4&amp;pdp_npi=4%40dis%21USD%2117.73%2117.73%21%21%2117.73%2117.73%21%402103146c17126108815943461e87f6%2112000026308687122%21sea%21US%214400633662%21&amp;curPageLogUid=SEKiZi6VHQsn&amp;utparam-url=scene%3Asearch%7Cquery_from%3A&amp;search_p4p_id=202404081414413052167654085920013512161_1" rel="nofollow noopener">Drive Integrated 42 57 Stepper Motor Driver Controller Forward Reverse Control Driver Angle Pulse Speed PLC Serial Communication - AliExpress</a>&nbsp;Stepper Motor Cable (cut the non-motor end connector off to wire it)$9 on Amazon<a target="_blank" href="https://www.amazon.com/Stepper-Motor-Printer-Cables-HX2-54/dp/B0CRDXNWMZ/ref=sr_1_1_sspa?crid=AMDADBSUZM5Y&amp;dib=eyJ2IjoiMSJ9.Sm58gK5-bW423k3-1u26VEg1wfESJ-pcNeyBPpACJ8PQe_fwTvgxnXv10jlIicizJTLnDZt3q1HKiLkUONIuTkBgHabbmrpxzZLaAyaznGOBIZdYvGuV_0Bnkopw6srCNXVA8I5ghdcJNUa-JERmaGGB0dMF7RaJNdwAN_Nal4ManPAJxfCwbF_nlXj71fcJn6HAlZhoNShE6up0Hc0CMMXnXpVxxFjnTboC5BkI3VxgN5sqwnEiKKKRPHsEFxkmuDPujncdvxmGjxc9U8mKi2pgoKG6_XRPL1-VdFohKuY.1kb30R8S6xJ8INVKXYjJBmKUCfdbPMUU74HTm9oL8kE&amp;dib_tag=se&amp;keywords=stepper%2Bmotor%2Bcable%2Bender&amp;qid=1710902933&amp;s=industrial&amp;sprefix=stepper%2Bmotor%2Bcable%2Bender%2Cindustrial%2C133&amp;sr=1-1-spons&amp;sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&amp;th=1" rel="nofollow noopener">Amazon.com: 3Pcs 3D Printer Stepper Motor Cables Lead Wire HX2.54 4 Pin to 6 Pin, Stepper Motor Wires 1.5M for Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5 Pro 3D Printer Nema 17 Stepper Motor, : Industrial &amp; Scientific</a>$1.69 on AliExpress&nbsp;Stepper Motor (Nema 17)$8 on Amazon<a target="_blank" href="https://www.amazon.com/Stepper-Bipolar-TEQStone-Printer-Extruder/dp/B0BMX62X22/ref=sr_1_11?crid=1CEPYW8MNK6XB&amp;dib=eyJ2IjoiMSJ9.hN-9QQUUabt-Xybqh_2hec-ybclc74rcWQq9RQ-ijSV_qDq8uKDK_aVSEGo1g8s7hEzG9U7OOgXWaTDdZ_B8IMkHBT1Xt6MLR8CVQFCuLxS6f-eeal6c0sgAat6xouXY_rF_-d26A-9BWHlIb925QtNTOe60PU9vipbooCwETbF8IeHT5dqtInlv3oO5T9W7QgqlB78Lz1JtoUl-8t0J37vy40jo0pSOnD3gJngpaxk4A_TEjEIV98shwOlxH8shAD8HZ84e4nnFnYdMBJcyejM4uvn1GRvtQJQYegPt34M.a7k7wET8XcU_ATELeuy16g-xffZFNSzE2-HsNVuzfJE&amp;dib_tag=se&amp;keywords=nema+17+stepper+motor&amp;qid=1710903077&amp;s=industrial&amp;sprefix=nema+%2Cindustrial%2C104&amp;sr=1-11" rel="nofollow noopener">Amazon.com: Nema 17 Stepper Motor, 40N.cm 1.68A Bipolar 2 Phases 1.8 Degree, TEQStone 42-40 Step Motor for 3D Printer and CNC, 27.5in 4-Wire Cable : Industrial &amp; Scientific</a>$10 on AliExpress and includes cable.<a target="_blank" href="https://www.aliexpress.us/item/3256805120725241.html?spm=a2g0o.productlist.main.23.5da7PdJ7PdJ7x2&amp;algo_pvid=79423135-d702-4288-bc8e-a165619f4d4b&amp;algo_exp_id=79423135-d702-4288-bc8e-a165619f4d4b-11&amp;pdp_npi=4%40dis%21USD%219.78%219.78%21%21%2170.10%2170.10%21%402101fb1317109033543927230e1d0b%2112000032570708603%21sea%21US%214400633662%21&amp;curPageLogUid=Mwd75P22l6yh&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">42 Steppers 4 Lead Stepper Motor Nema 17 Motor With 1m Cable 42BYGH 38MM 1.5A For Anet A8 A8+ A6 ET4 /X/ Pro ET5 /X/Pro 3D Print - AliExpress</a>&nbsp;40mm 12vdc Fan$9 on Amazon (4 pack)<a target="_blank" href="https://www.amazon.com/MakerFocus-Printer-40X40X10mm-Appliances-Replacement/dp/B07CH6YC32/ref=sr_1_5?crid=2WYRXERTZG54J&amp;dib=eyJ2IjoiMSJ9.Bbstdcp2tztqALgoiFHfG52Zdms0PqjLzVKgsIka1hZK4DcRBd_VZDP-uVFRl90siMcX48GSJxm7MRozFwapgHnKZ84e6KZhOhFgvCc_fF7e-sLXdk_8ur6-QvnqEOE5Hc0u8pZmmXAdlQxej4kqXaxVtW5p1n8tWQPdCKjffl33HhSRUbN4RhS2fk0IKW-xcyz_eM3O9itdFKsYf-S4oHBUIGI_7-w4b-cWQXt4XTTQW3A5i30fwSpEylMDG9geJmtxDv8iPxiSTnO7sgza32oI4lddA-pK0htEtooH_FM.tD8Z3CAcUfbf2ICjlUFK4qcp8cMGJ7mMURNw9Y7rHLQ&amp;dib_tag=se&amp;keywords=40mm%2B12%2Bvolt%2Bfan&amp;qid=1710903522&amp;s=industrial&amp;sprefix=40mm%2B12%2Bvolt%2Bfan%2Cindustrial%2C116&amp;sr=1-5&amp;th=1" rel="nofollow noopener">Amazon.com: MakerFocus 4pcs 3D Printer Fan 12V, 40mm 12 Volt Fan 0.08A DC Mini Quiet Cooling Fan 40X40X10mm with 28cm Cable for 3D Printer, DVR and Other Small Appliances Series Repair Replacement : Electronics</a>$1.37 on AliExpress<a target="_blank" href="https://www.aliexpress.us/item/2251832453788606.html?spm=a2g0o.productlist.main.7.61ca2jxg2jxg53&amp;algo_pvid=f18cab15-844c-407a-b017-ea0d6f204a55&amp;algo_exp_id=f18cab15-844c-407a-b017-ea0d6f204a55-3&amp;pdp_npi=4%40dis%21USD%211.37%211.37%21%21%211.37%211.37%21%402101e7a317109035084911289e1844%2112000036692295751%21sea%21US%214400633662%21&amp;curPageLogUid=EPKsUh5VSq6D&amp;utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">New 4010 Fan 40MM 4CM 40*40*10mm Fan For South and North Bridge Chip Graphics Card Cooling Fan DC5V 12V 24V 2pin 3pin - AliExpress</a>&nbsp;120vac to 12vdc power supply$9 on Amazon<a target="_blank" href="https://www.amazon.com/gp/product/B0B51R6R2Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&amp;psc=1" rel="nofollow noopener">Amazon.com: Arkare 12V 3A Power Supply Adapter 36W ac/dc Charger AC 100V-240V to DC 12Volt 3amp Power Cord 12V 2.5A 2A 1.5A 1A 800mA 500mA for Security Camera BT Speaker GPS Webcam Microphone Receiver with 10TIPS : Electronics</a>&nbsp;AliExpressThere are countless. Just be sure it’s 12vdc, 3amp, and has flying leads (red/black) to connect to the Stepper Motor Driver/Controller.Other parts used were: M3 barrel head hex screws and heat sets. None of the screws are longer than 10mm, most were 5mm.&nbsp;Pictures<figure class="table" style="width:52.56%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:1.0pt solid windowtext;padding:0in 5.4pt;vertical-align:top;width:124.6pt;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_c75389d9cc66d.jpeg"></td><td style="border-bottom-style:solid;border-color:windowtext;border-left-style:none;border-right-style:solid;border-top-style:solid;border-width:1.0pt;padding:0in 5.4pt;vertical-align:top;width:124.6pt;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_c337774828712.jpeg"></td><td style="border-bottom-style:solid;border-color:windowtext;border-left-style:none;border-right-style:solid;border-top-style:solid;border-width:1.0pt;padding:0in 5.4pt;vertical-align:top;width:145.15pt;"><figure class="image image_resized" style="width:81.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_c8b0e8b309eaf.jpg"></figure></td></tr></tbody></table></figure><ul><li>There are two versions of each piece, one with chamfers on the holes and one without.  </li></ul>Design &amp; CoolingThe fan drives air upwards at an angle around the stepper motor and out through the bottom where the air passes by the electronics on its way out the back.<figure class="table" style="width:83.4%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="border:1.0pt solid windowtext;padding:0in 5.4pt;vertical-align:top;width:152.75pt;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_8bc55ae3779a3.png"></td><td style="border-bottom-style:solid;border-color:windowtext;border-left-style:none;border-right-style:solid;border-top-style:solid;border-width:1.0pt;padding:0in 5.4pt;vertical-align:top;width:175.5pt;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_df549361a3f9d.png"></td></tr></tbody></table></figure>&nbsp;Wiring12vdc power to the back of the DC Motor Controller, also connect the red/black lead from the FAN to the same screw down connector/terminal.<img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_fe2f42d21aff5.jpeg">The connections from the DC Motor controller to the motor<img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_0fb8e65d864ed.jpeg"> The following diagram outlines the connections. Note that the cables might not perfectly line up but it’s important that A+ is to A+, etc. If you’re not sure, look it up before connecting and powering up the system. <img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_32864e0e04df5.png" alt="A diagram of a machineDescription automatically generated"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_268509ae25abd.png" alt="A close-up of a batteryDescription automatically generated">&nbsp;Remixed Drive Axle &amp; Motor Drive GearI printed everything but the drive axle and drive gear with PLA. That said, PLA will NOT be able to handle the torque, maybe PLA+, but I printed with PETG and it’s more than strong enough to withstand the stress/torque of the stepper motor.&nbsp;Note: Depending on your printer settings, you may have to slightly increase the size of the drive axle (1%) to accommodate variances in printing. It should already have enough clearance for the drive gear to float a little in the axle, but not overmuch causing slop or wear.&nbsp;If you’ve already printed and assembled the V-Spooler, you’ll need to do a little disassembly around this piece to use the new drive axle.&nbsp;I used a heatset on the screw hole in the drive gear (attaches to motor shaft). You will also want to put a heatset in the end of the drive axle as described in the original V-Spooler instructions. <img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_b5c6869fef87e.png" alt="A black plastic object with holesDescription automatically generated"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_dcb431eb13951.png"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_32dd6a7605a49.jpeg">Drive Axle remixed from <a target="_blank" href="https://www.printables.com/model/698287-v-spooler-remixable-parts" rel="nofollow noopener">V-Spooler Remixable Parts by Fyrby Additive | Download free STL model | Printables.com</a>&nbsp;Settings on DC Motor ControllerSubdivision set to 4 or the stepper motor may vibrate and make excessive noise. This might vary depending on the stepper motor make, but this creality was clean with 4. I would expect this to be common among Nema 17 stepper motors, but I’m no expert so some experimentation might be needed if 4 doesn’t work for you.<figure class="table" style="width:73.9%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="border:1.0pt solid windowtext;padding:0in 5.4pt;vertical-align:top;width:269.75pt;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_543f627a9bc33.jpeg"></td><td style="border-bottom-style:solid;border-color:windowtext;border-left-style:none;border-right-style:solid;border-top-style:solid;border-width:1.0pt;padding:0in 5.4pt;vertical-align:top;width:269.75pt;"><img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_61bb5900859a1.png"></td></tr></tbody></table></figure>&nbsp;&nbsp;Amp setting rotary selector, I left this at the default.<img src="https://makerworld.bblmw.com/makerworld/draft/833022/2024-03-20_3b59f2d0c9989.jpeg">&nbsp;I think that is everything, any questions, don&#39;t hesitate to ask.

V-Spooler Easy Motor Drive

V-Spooler

Grogu/Yoda

MakerVerse Designs

Fully 3d printed crocs shoes<ul><li>Printed with Overture TPU</li><li>PLA for the snap button</li></ul>Important notes:<ul><li>It is for EU shoe size number 42 (male), but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-19_0266f756a989a.png"></figure><ul><li>If the shoe is too big to fit to the printers height, use the “WithSupport”-Version, rotate in Y-Axis (green) and use the cut tool in Bambu Studio to create a new flat surface parallel to the print bed<ul><li>I uploaded an .stl file without cut on the bottom for better scaling</li></ul></li></ul>&nbsp;<ul><li>There are two ways to print this:</li></ul><ol><li>Use a textured PEI bed and print it standing up without support</li><li>Or use another not so sticky bed and print it standing up with support</li></ol><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-04-12_cc0523cbae068.png">&nbsp;If you can&#39;t get enough of printed shoes, check out my new model (Slide Shoes, Adilette):<a target="_blank" href="https://makerworld.com/en/models/488792#profileId-401842" rel="nofollow noopener">https://makerworld.com/en/models/488792#profileId-401842</a><img class="image_resized" style="width: 41.76%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000425034/design/2024-06-08_bb258037ea2a1.png">Have fun with it and leave a like or subscribe if you like it!If there are any suggestions for improvement, feel free to write a comment.

Crocs Shoes - Fully 3d-printed

Crocs

untiedlaces

The small size and short printing time make it ideal for trial 3D printing.&nbsp;Print in Place with supports.&nbsp;Print at 30mm/s maximum.&nbsp;Please take pictures of your Demonic Egyptian Cat and share them with us!&nbsp;⚠Warning⚠&nbsp;Be careful in environments with young children and pets!&nbsp;This model contains small parts.&nbsp;If not stored correctly in an environment with young children or pets, it may lead to accidental ingestion or injury.&nbsp;If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in a proper place.&nbsp;Do not apply strong force!&nbsp;Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries.&nbsp;In addition, debris from damage to the model may be accidentally ingested by infants or pets.&nbsp;If the model is damaged, dispose of it immediately.&nbsp;Store them in an appropriate place.&nbsp;After 3D printing, store the model in an appropriate place out of reach of young children and pets.&nbsp;Proper adherence to the precautions will ensure the safe use of the model.

Winged Egyptian Cat

LorenzCR

Auto tuning fin to be glued with 3M double-sided tape.Dimensions:Height 65mmLength 170mmWidth 70mm

Fin auto tuning

Shark Fin

Demamba Prints

Used Polycam to scan a statue of a Cat stretching with a bird perched on it's tail.Thought it came out really well and wanted to share it.&nbsp;Etsy Page: <a target="_blank" href="https://demambaprints.etsy.com/" rel="nofollow noopener">https://demambaprints.etsy.com</a>Tik Tok: https://www.tiktok.com/@demambaprintsPolycam scans here: <a target="_blank" href="https://poly.cam/@DeMambaPrints" rel="nofollow noopener">https://poly.cam/@DeMambaPrints</a>

Stretching Cat with Bird on Tail

Statue

Wickieprints

UPDATE: I added a new profile with a top piece with a label on it where you can put your price or name on it. You can edit it in Bambu studio. Just put some text to it. &nbsp;&nbsp;I made this rotating keychain display. It&#39;s very sturdy and requiers no glue or anything else. If you want a taller one just simply make the middle rod taller. It rotates very smooth and doesn&#39;t fall over.&nbsp;I added a second profile with a mid wheel option to make it as tall as you want. &nbsp; You can sell our designs we made and are available on our makerworld page. Wit a small sub on our Patreon you get a commercial license to sell and back our non profit founding for Children with special needs: <a target="_blank" href="https://www.patreon.com/wickieprints/posts" rel="nofollow noopener">https://www.patreon.com/wickieprints/posts</a>

Keychain display rotating

Display Stand

EDDIEB3D_

Create your own suspended String Art TEXT! Created this base for those who want to create their own. Not limited to text, you can add any STL in the middle just make sure to follow the steps in the how to video here: <a target="_blank" href="https://www.tiktok.com/t/ZTLr3m69X/" rel="nofollow noopener">https://www.tiktok.com/t/ZTLr3m69X/</a>&nbsp;

Create Your Own String Art (Rectangle)

Sign

RDesigns

The Allround Box V1.5 OUT NOW! <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a>This is the older Version of “The Allround Box”!Please switch to the new one, if you don&#39;t need replacements parts from this site.&nbsp;-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;&nbsp;The box is assembeld with pieces of filament, so screws arn&#39;t needed anymore!&nbsp;If the filament falls out of the hinges, glue the ends a little with super glue.&nbsp;For the sealing, TPU can be used.&nbsp;Attention:Pay attention to the comments in the parametric design in Fusion 360!&nbsp;Release Notes:27.03.2024<ul><li>The V1 avaliable now!<ul><li>Screws are replaced trough small pieces of Filament that perfectly fit in!</li><li>The Design in Fusion 360 is Parametric, most of the dimension can be changed.</li><li>The Latch design stands out with it&#39;s wheels, which lock into place perfectly!</li></ul></li></ul>31.03.2024<ul><li>Update V1.2!<ul><li>Some model issues fixed.</li><li>Better fit for non sealed boxes.</li><li>Filament holes widened</li></ul></li></ul>05.04.2024<ul><li>Update V1.3<ul><li>Some parametric design issues fixed.</li><li>TPU seal geometry more water resistant</li></ul></li></ul>12.06.2024<ul><li>Version 1.5 OUT NOW!</li><li>You can find it here: <a target="_blank" href="https://makerworld.com/en/models/492885#profileId-406546" rel="nofollow noopener">https://makerworld.com/en/models/492885#profileId-406546</a></li></ul>&nbsp;

Rugged Storage Box V1 (Parametric, Screwless) 

Containers

hubuki

Holds 4 k-cups at a time, prints in 2 peices and press fits together. Use double sided tape to secure, and load in from front.

Keurig K-Cup Under cabinet holder

Household

TBH113

Usefull holder for your one blade and all the combs

One blade and combs holder and organizer

Y0shiii

Simple mount for screwing 10mm wide LED Strips to a surface. The hole is 3mm wide.

LED Strip Holder Clamp 10mm strip width 3mm screw size

LED Strip

neilskig01

made this for my daughters business for taking pictures without the need for hiding backgrounds.

Photo box

Photobox

Valeria Momo

Complete set of Decorative Letters (A-Z) to stick / attach on your door or wall. If you prefer to place the letters on your desk or shelf, check <a target="_blank" href="https://makerworld.com/en/models/389456#profileId-290376" rel="nofollow noopener">this </a>model. You will also find the e (&) and heart symbols, so you can compose complex writing.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779490/2023-11-19_c8d27404379f3.png"></figure><h2>Printing suggestions</h2>AMS ready (only 15 color changes). Very easy printing, no advice to suggest.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/779490/2023-11-19_c8d27404379f3.png"></figure><h2>Commercial license</h2>Do you want to sell prints of this model? You can purchase commercial licensing for this model<a target="_blank" href="https://patreon.com/ValeriaMomo?utm_medium=clipboard_copy&utm_source=copyLink&utm_campaign=creatorshare_creator&utm_content=join_link" rel="nofollow noopener"> by joining the Commercial License in my Patreon</a>.

Decorative Letters (A-Z) to stick

Alphabet

Daniel3D

10.01.23 Update: Due to the change by makerworld, the box was renamed from "Bambu Filament Swatches Rugged Box" to "Filament Swatches Rugged Box". Tags have also been removed13.12.23 Update: Added print plates for one sample (X1,P1,A1)13.12.23 Update: Added new inserts: Non branded, PLA, PETG, ABS, ASA.11.12.23 Update: Added pictures for assembly23.10.23 Update: Added sample23.10 23 Update: New Version of the insert with more space.&nbsp;Rugged box for Bambu Filament Swachtes. All 80 pieces fit exactly into the holder or you can print them out yourself. The file for a sample is included Print with 0.2mm layer, 15% infill.&nbsp;the only thing you need are six M3x30 screws.You simply screw it into the hole provided as shown in the instructions in the picture&nbsp;&nbsp;The latches are redesigned from https://www.printables.com/de/model/39729-tool-box-parametric

Filament Swatches Rugged Box

Tool Box

K2_Kevin

Other sizes (4x3, 4x5, 4x6) available here: <a target="_blank" href="https://makerworld.com/en/models/201205#profileId-221569" rel="nofollow noopener">https://makerworld.com/en/models/201205#profileId-221569</a>&nbsp;Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;&nbsp;PRINT SETTINGS:<ul><li>Layer Height: 0.2mm</li><li>Supports on drawers only: RECOMMENDED (Tree Supports on front lip ONLY)</li><li>Build Plate: I recommend using GLUE / Nano Polymer to prevent warping!</li></ul>&nbsp;What&#39;s changed &amp; reimagined?<ul><li>Added drawer stops!!! Don&#39;t accidentally spill your screws.</li><li>Added alignment space for easy stack-ability</li><li>Added large magnet top</li><li>Smooth sided version so they sit close together without gaps.</li><li>28 Drawer slots</li><li>Included my own and original no scoop drawers</li><li>Compatible with all original drawers.</li><li>6x3 magnets with glue. Glue in hole(s), then use another magnet on top to slide/drop them in place.</li></ul>Video of the ScrewUnit in action! <a target="_blank" href="https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067" rel="nofollow noopener">https://www.tiktok.com/@k2_kevin/video/7333459188099730719?is_from_webapp=1&amp;sender_device=pc&amp;web_id=7287757770546497067</a>&nbsp;&nbsp;Reimagined design of Modbots organizer.ModBots Original: <a target="_blank" href="https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915" rel="nofollow noopener">https://thangs.com/designer/Modbot/3d-model/Voron%200.1%20Hardware%20Organizer-23915</a>

ScrewU-nit Hardware Organizer Storage

Bambu Tools

UsefulPrints

Hogwarts Castle

Castles

Little Mac Designs

This 3d Printed Resting Succulent Planter is perfect for sitting on your desk to bring a smile to your face every time you look at it!

Resting Pot - Mini Succulent Planter

ale_elli

this is a nice penholder for all Star Wars fan!

Darth vader penholder

Darth

Mandala

Sneaker

@Repkord on Printables created this. I uploaded it under the Share model and will receive no points for downloads. The description is copied from the Printables page. Any donate or affiliate links go directly to @Repkord.&nbsp;----&nbsp;Welcome to RepRack! A modular, inexpensive, functional, easy to source, mass filament storage and spool holder system. Wall mountable or for use on the desktop. RepBox compatible. All source files are included to either 3D print or laser cut your own. The rail system is compatible with our new <a target="_blank" href="https://www.prusaprinters.org/prints/135700-slip-rod-cover-for-reprack-and-repbox" rel="nofollow noopener">slip rod covers</a> allowing you to print directly from the rack in any number of configurations.&nbsp;To give you a sense of expense a 10 foot long RepRack holds ~50 spools and costs about $20 or so in materials depending on how you decide to make it.&nbsp;<a target="_blank" href="https://www.repkord.com/products/reprack-starter-kits" rel="nofollow noopener">If you prefer to buy starter kits directly from Repkord rather than make yourself you may do so here</a>&nbsp;Ready to make your own? Read on:&nbsp;The hallmark of the RepRack system is its versatility. You may wish to use it for storing large amounts of filament spools neatly on your walls. Perhaps you want a small rack to hang above your printer that you can print directly from. Maybe desktop use with anti-skid feet is your preference? Perhaps you want a rack you can load and unload from your <a target="_blank" href="https://www.repkord.com/collections/repbox-2/products/repbox-2-the-3d-printing-spool-management-solution" rel="nofollow noopener">RepBox</a>… we've got you covered there too.Take a look at the photos to get a sense of how the system works. You can print or laser cut as many or as few of the RackHangers as you need. If you are printing them we HIGHLY recommend using the thickest nozzle you can as that will greatly increase the part strength. Locate the hangers everywhere you can anchor it to a wall stud or something secure. For hanging options you may use continuous french cleat strips or the provided individual brackets. If using printable brackets again use the thickest extrusion you can for the most strength and locate them closer together. Laser cut hangers may be spaced up to 32" apart OC typically if using ¼" thick (6mm) material. For laser cutting we recommend melamine or plywood. Never plain MDF. 3/16" (4-5mm) May also be suitable if used in closer spans. When in doubt, more is better.<h4>BILL OF MATERIALS</h4>Non-Printable Parts:<ul><li>½" EMT (~19mm Outer Diameter pipe) Conduit commonly found at local hardware supply stores like <a target="_blank" href="https://www.homedepot.com/p/1-2-in-x-10-ft-Electric-Metallic-Tube-EMT-Conduit-853428/100400405" rel="nofollow noopener">Home Depot</a>, Lowes, ACE, or other regional home stores. In addition you may be able to source it at any local Electrical supply store. Simply cut to length using a standard pipe cutter, hacksaw, abrasive cutoff wheel or similar metal cutting tool. Often times home stores can cut to length for you if you plan what you need ahead of time.</li><li>#6 x 5/8" (16mm) Thread Forming Screws for Plastics… also known as Plastite screws. These screws work really well fastening 3D printed parts to other materials. If you need a source for these <a target="_blank" href="https://www.repkord.com/products/6-x-5-8-16mm-thread-forming-screws-for-plastics-50-pack" rel="nofollow noopener">Repkord sells them in packs of 50 here</a>.</li><li>#8 x 3" (75mm) Wood screws for anchoring cleats to wall. You'll need at least two per printable cleat, less if you cut your own cleats. The total number needed will of course depend on how long your RepRack installation is. We HIGHLY recommend anchoring into studs or solid material. Wall anchors may be used as well but you will need to decide how many and what spacing is appropriate for the load intended.</li><li>Optional French cleat… see the provided drawing below for cutting your own french cleat strips. You will need to drill and countersink your cleat at whatever intervals you decide are appropriate for proper anchoring to the wall. <a target="_blank" href="https://www.repkord.com/collections/repbox-2/products/repkord-wall-mount-kit" rel="nofollow noopener">Wall mount kits with a 485mm (19") long cleat and fasteners are available from Repkord here.</a></li></ul>Printable / Laser Cuttable Parts (USE PETG FOR BEST RESULTS):<ul><li>Hanger Sides… at least 2 but as many as you need for the length of rack you're trying to build.</li><li>Rod Clamps… for laser cut hangers you'll want two clamps per hanger. There's an option to use the “U” style if you decide to clamp the pipe to the bracket after you've already run the pipe through it. Its sometimes easier to get your wall mount spacing right this way. The standard clamps are a bit more robust but you need to attach them prior to threading the rod through the hanger holes.</li><li>Optional Printed single wall mounts… If you're not using continuous runs of french cleat you'll need as many of these as you have hangers. Print them using the thickest extrusion you can for maximum part strength.</li></ul>Optional Add-Ons:<ul><li><a target="_blank" href="https://www.prusaprinters.org/prints/129972-rackstand-repwinder-stand-for-repbox-231-and-repra" rel="nofollow noopener">Rack stands / RepWinder stands </a>- Go here for the cardboard spool / <a target="_blank" href="https://www.prusaprinters.org/prints/6174-repwinder-v214" rel="nofollow noopener">RepWinder</a> stand solution compatible with <a target="_blank" href="https://www.repkord.com/products/repbox-2-the-3d-printing-spool-management-solution" rel="nofollow noopener">RepBox 2.3.1</a> and up and RepRack.</li><li><a target="_blank" href="https://www.prusaprinters.org/prints/131429-rackroller-open-source-flange-roller-add-on-for-re" rel="nofollow noopener">Rack Rollers / RepBox Compatible Bearing Flange Rollers</a></li><li><a target="_blank" href="https://www.prusaprinters.org/prints/135700-slip-rod-cover-for-reprack-and-repbox" rel="nofollow noopener">Slip Rod Cover for EMT for printing directly from the pipes</a></li><li><a target="_blank" href="https://www.repkord.com/products/repkord-wall-mount-kit" rel="nofollow noopener">French Cleats for RepBox, RepWinder, RepRack, and Catch Bin kits.</a></li></ul>Files are available to all. We appreciate your recognition of our brand as the creator of this system and are very excited to see how you use it. Remixing for personal use is allowed but we do kindly request that you maintain our branding if doing so. Your support of our company allows us to continue to create and share projects like this with the community. If you would like to see more open source contributions like this from us please consider donating whatever amount you feel is fair to help our efforts here: <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=2C3K3DV44QAFQ" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=2C3K3DV44QAFQ</a>&nbsp;By no means is this required but it is ALWAYS appreciated.

RepRack: Open Source Spool Holder And Storage System by Repkord

RepRack

izboxo

Don't you hate mess on your table? This will solve one of your problems.&nbsp;MagSafe version. <a target="_blank" href="https://makerworld.com/en/models/229007#profileId-246518" rel="nofollow noopener">Here</a>&nbsp;You can find supported watches inside print profiles.&nbsp;<img src="https://cezarsalat.eu/watch.gif"><img src="https://cezarsalat.eu/watch3.GIF"><img src="https://cezarsalat.eu/mount.GIF">-------------------------------------------What you will need.<ul><li>4x 3x25mm Screw</li><li>Or print Double sided tape mount. And use tape.</li><li>Basic skill in screwing</li></ul>-------------------------------------------&nbsp;

Table Watch Charger Holder

Watch Stand

01makes

Desk USB charging station plus cable organizer&nbsp;<h2>About</h2>&nbsp;I created this organizer to house my USB charger, with stands for my phone and Apple Watch, and additional routed cables for charging other devices. I&#39;ve also included a pencil holder attachment as an option.<ul><li>The organizer can hold a 8cm wide, 10cm long, and 3cm tall charger with space to plug in USB connectors and mains power.</li><li>For reference, the internal usable space of the organizer box is 165mm x 105mm x 40mm tall.</li></ul>&nbsp;<h2>Printing</h2>&nbsp;The print profile I have uploaded has supports (and support blockers) set for the various parts. Print only the parts you require. If you download the raw files, please refer to my print profile for recommended support configuration.&nbsp;&nbsp;<h2>Assembly</h2><ul><li>Install the attachments (phone stand, watch charger stand, pen holder etc) to the organizer&#39;s lid. Start with the right most attachment, paying attention to the orientation and turning counter clockwise to lock into place.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_7dff21030e8538.jpeg"></figure><ul><li>Put your USB charger into the organizer</li></ul>&nbsp;<ul><li>Route the USB cables you will be using into the organizer box. Coil the excess length within the organizer box before plugging the connectors into the USB charger</li></ul>&nbsp;<ul><li>Fit the organizer lid to the box, taking care to align the tab that is on the lid with the box.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_59bfbabba80c7.jpeg"></figure>&nbsp;<ul><li>Finally cap the cable holes with the appropriate caps. There are 3 to choose from:<ul><li>Cap for a single cable</li><li>Cap for two cables, on opposing sides</li><li>Cap for two cables, on the same side</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_f7ae51ad47f628.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_fba24bcf72da8.jpeg"></figure>&nbsp;<h2>Design and share your attachments</h2>&nbsp;Three attachments are provided in my design:<ol><li>Phone stand: this should fit most slab phones</li><li>Apple Watch charger stand</li><li>Pencil holder</li></ol>&nbsp;If you wish to make your own attachments, for example, if you&#39;ve a non-Apple watch charger, I&#39;ve upload the model for the attachment base. The model can be found here: <a target="_blank" href="https://makerworld.com/en/u/1401660476" rel="nofollow noopener">https://makerworld.com/en/u/1401660476</a>&nbsp;&nbsp;&nbsp;<h4>A like or follow will be most appreciated to help others discover this model. TYSM!</h4>&nbsp;__&nbsp;

USB charging station cable organizer desktop box 

Bed stand

SH Designs

Take professional looking photos of your 3D printed models. This tabletop photo studio light box is seamless, providing an infinite background style without corners or seams. Similar tabletop cycloramas sell for $180 at photography supply stores. Print yours for around $10 in 6 hours!&nbsp;I printed this in Bambu Basic Jade White. For black or darker color backgrounds I recommend using matte filament to prevent reflections or visible printing seams. The background can be sanded and painted for a smooth custom finish of any sheen or effect. I am going to print one with matte black and sprinkle in some stars for an infinite space background! I'll upload the photos when it is complete.&nbsp;All photos were taken with iPhone. For the light source, I used an adjustable desktop LED lamp with color temperature controls. This was perfect as I was able to move the light source easily to where I needed it. There are several affordable options on Amazon and elsewhere. &nbsp;Note: Bedslinger-type printers may need to print a little slower to prevent vibration at the top of the print. Just monitor your model for any movement in the last hour and slow down your printer if necessary to eliminate any vibration artifacts. Since printing, I made the walls 2 layers thicker than my prototype and added a rib to each end of the background to stabilize the walls and prevent vibrations at the corners, and also for added opacity.

Photo Studio Light Box

Photo

Jopek Design

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_rk3rntee47nu.png"></figure><h4>Dimensions (LxWxH)</h4>132 x 150 x 32mm (100% scale)<h4>Basic information</h4>The design was inspired by the Green Sea Turtle, which is undoubtedly one of the most iconic sea animals. The model is is split into 6 movable parts: a shell, which serves as a centerpiece, a head, and 4 fins. It prints in place, and no additional assembly is required. The base model is slightly oversized, so that all the fine details come out nicely, namely if you're printing in multicolor. If you're printing it in a single color only, and aren't bothered with loss of definition too much, feel free to downscale it to your liking. The model has been thoroughly tested, and should print fine up to 50% of the original size in single color, if you have a well calibrated, and reasonably accurate setup.<h4>Files information</h4>I've included 5 files: All of them are in the .stl format, and sorted into 2 folders. The folders are labeled Single color and Multicolor, the single color folder contains 1 file, which is a plain, 1 piece version of the model, intended for single color printing. The Multicolor folder contains 3 files for multicolor printing, each file is named after the color, which was used on the example model in the image gallery. Import them all at once into your slicer as one file with multiple parts, and it should automatically align the parts, and assign an individual color to each of them.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_vigsf58o172r.png"></figure><h4>Material</h4>PLA<h4>Layer height</h4>0,2 mm<h4>Infill</h4>>15%<h4>Support</h4>None. The model doesn't require any support material.<h4>Scaling</h4>Possible, but mind the accuracy of your setup. If you go too far with your scaling experiments, you might run into issues such as fused segments, or fragile links. If you have a well calibrated setup, you should be able to print the model at up to 50% of the original size without any issues, other than a definition loss.<h4>Orientation</h4>Default, laid flat on the belly<h4>Adhesion aid</h4>Not necessary, the contact area with the buildplate should be sufficient. However if your print surface suffers from poor adhesion, consider using an adhesive spray, or some other kind of adhesion booster. Using a brim is possible, but not recommended, as it would be too difficult, and inconvenient to remove afterwards.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_s3a36s7dnq9a.png"></figure>This section contains a list of all updates and fixes, which were introduced to the model along the way. Each update will be thoroughly explained, so that you know, which issue was each specific update addressing. If you're having any problems with the model, you can check here, if a new, revised version of the model, has already been released in a response to your problem, or not.If you run into any issues with the model, please pay a visit to a section of known issues, which can be found just below the Updates and fixes. If you won't find your specific problem in there, don't hesitate to contact me via dm!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_iogqewhn95rb.png"></figure>There currently aren't any known issues/work in progress. If you run into any, please contact me via dm.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_gdflo6b9cpom.png"></figure>My work is free for personal, non commercial use. If you want to sell, or monetize my models in any other way, please contact me via dm, and we will talk over further details, terms and conditions, and your individual pricing plan.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/584757/2024-02-04_g5kaaodclbq6.png"></figure>If you like my work, and want to support it, you can buy me a coffee at <a target="_blank" href="https://www.buymeacoffee.com/jd3d" rel="nofollow noopener">https://www.buymeacoffee.com/jd3d</a> , so that I can keep my designs free for everyone.

Articulated Sea Turtle (singlecolor and multicolor)

Turtles

LiL_PPJ

CUTE DRAGON KEYCHAIN

Keychain

Diggle

After watching my nephew attempt to build his own race track for his hot wheel monster truck at the beach, I decided to help him out with a few designs to make his own track. <ul><li>180 Bank</li><li>Ramp/Jump</li><li>Rumble Bumps</li></ul>Haven't been able to test on sand, but I recommend Printing with the top of the mold facing the bed, so supports dont affect the inner mold surface finish.

Monster Truck/Motocross Track Sand Molds

Kids

Gr3dstampaidee

i have different tools (scissors, wrench, caliper, ecc..) piled in my drawerno supporteasy print&nbsp;accessories add<ul><li><a target="_blank" href="https://makerworld.com/en/models/141937#profileId-154516" rel="nofollow noopener">IKEA SKADIS TRAY by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/151801#profileId-165723" rel="nofollow noopener">IKEA SKADIS SCREWDRIVER by Gr3dstampaidee - MakerWorld</a></li><li><a target="_blank" href="https://makerworld.com/en/models/169213#profileId-185817" rel="nofollow noopener">IKEA SKADIS SCRAPER BAMBU LAB PEGBOARD by Gr3dstampaidee - MakerWorld</a></li></ul>

IKEA SKADIS TOOL HOLDER

Skadis

DesignCraft

DISCLAIMER: Print profiles NOT created by DesignCraft may contain outdated model versions or suboptimal slicer settings. Use at your own risk! I have no control to moderate or remove these third party print profiles.&nbsp;The Polymaker v2 print profiles are the original print profiles updated with new models. They're redesigned based on user feedback and also use 30-40% less material. Please refer to the Disclaimer above and also please read the Considerations section below.&nbsp;Description:&nbsp;This adapter system wraps the edges of a POLYMAKER 1kg cardboard spool in order to:<ul><li>provide smooth rotation within a Bambu Lab AMS</li><li>prevent carboard debris from depositing within a Bambu Lab AMS</li></ul>Notes:<ul><li>I've tested with several POLYMAKER PolyTerra spools and the diameters tend to vary slightly.</li><li>The Polymaker.A model fits most of my POLYMAKER spool rims. Polymaker.B has a slightly smaller inner diameter. I use both of these models on my spools.</li><li>It is possible to have Polymaker.A fit on one side of a spool and Polymaker.B fit on the other side.</li><li>The size of the holes on the spool is NOT an indicator of spool diameter from my experience.</li><li>Tested on PolyTerra spools but also may be compatible with PolyLite, PolyMax, and PolyWood.</li><li>Shown as printed with Bambu Lab PLA Basic at 0.2mm</li></ul>Features:<ul><li>Reusable</li><li>POLYMAKER nameplate for easy identification when reusing</li></ul>Instructions:<ul><li>Print Polymaker.A and test BOTH SIDES of the POLYMAKER spool to see if it fits snug. If the ring is too loose for either side then print Polymaker.B and test again.</li><li>See attached photos</li></ul>Considerations:<ul><li>Print Material: Please print with a basic PLA or PETG to minimize any shrinkage.</li><li>Too Tight? Too Loose? Cardboard expands with humidity and contracts when dried. A cardboard spool that has absorbed too much moisture may cause the adapters to fit very tight. Placing the spool in a filament dryer, such as the SUNLU S2, for a bit should resolve this. Note, you should not dry the spool with the adapters attached as they can warp in the heat. Keep in mind that after a long drying session the adapters may fit too loose. This should resolve itself shortly as the cardboard reabsorbs some moisture from the air.</li><li>AMS Lid Doesn't Close? All of the spool adapters I make are less than the official AMS spool clearance limit of 202mm, as specified on the official AMS product page, and as tested within my own AMS. However, some people have stated their spools are rubbing against the lid with the adapters attached. It's hard to say what's causing this since I cannot reproduce the issue myself, however, I've created an <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">AMS Lid Riser</a> which allows you to keep your AMS lid closed while providing additional clearance for larger filament spools. It's a quick and easy print which you can find on <a target="_blank" href="https://makerworld.com/en/u/243407759" rel="nofollow noopener">my profile</a> or directly here: <a target="_blank" href="https://makerworld.com/en/models/33133" rel="nofollow noopener">https://makerworld.com/en/models/33133</a></li></ul>

POLYMAKER PolyTerra Bambu Lab AMS Cardboard Spool Adapter Ring

Spools

Marek Tomaszewicz

A fire hydrant that can be used as a small container. You can scale it to the desired size. When having a problem with fittment, just adjust the cap scale slightly.

Fire hydrant (container)

Fire Hydrant

IceGabrielito

That's another HueForge model! It's ready to be printed.&nbsp;&nbsp;If you want, here you have text file from Hueforge:&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm&nbsp;&nbsp;Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA BambuLab Basic Jade White&nbsp;&nbsp;Swap Instructions: Start with Black At layer #6 (0.6mm) swap to Red At layer #12 (1.08mm) swap to Yellow At layer #18 (1.56mm) swap to White for the rest.

Star Wars Darth Vader (HueForge)

Hueforge

TheBasedDoge

Simple build plate holder for 5 plates, plus the official bambu lab scraper model. Pre-colored for multicolor printing. Also fits the thicker aftermarket build plates such as the carbon texture / 2 sided ones.&nbsp;Also included a version without bambu logo.&nbsp;&nbsp;If you want a version WITHOUT the scraper holder:https://makerworld.com/en/models/57708#profileId-59462

5X Build Plate + Scraper Holder - Minimalistic for P1/X1

Build Plate Holder

3dcreativecustom

led light box10%- infillArachne - wall generator17% infill/wall overlap

kawasaki light 

Creative MinerX

Shelf

marcelcountry

<figure class="media"><div data-oembed-url="https://youtu.be/ho177dw0Ji8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ho177dw0Ji8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Per gli amanti dello SVAPOContenitore di 7 boccette Chubby Gorilla da 120 ml + 1 boccetta Chubby Gorilla da 20ml&nbsp;For SVAPO loversContainer of 7 Chubby Gorilla bottles of 120 ml + 1 Chubby Gorilla bottle of 20ml&nbsp;

Liquid Holder for Vaping

Vape

Cap’s Builds

Desiccant Holder

Dessicant Holders

Jasonuht

Have some fun with your friends or coworkers. Let them know that they beat the odds and became the person they are today with this silly little award.Printed at 200% of the original design.AMS for color swap with a total print time of 2h 37m.

Strongest Swimmer Award

Toys

GamerForge

I designed a Screwdriver Hex Bit holder for 72 Bits. (60 small bits, 12 long bits)

Shaver

Custom Name

Solder

Lamps

Dessicant Holder

Cup Holder

Crate

Dice

Bambu Rollers

Street Sign

Cup Holders

Dog Toy

Price

Planters

Fidget

V-Spooler

Grogu/Yoda

Crocs

Cat

Shark Fin

Statue

Display Stand

Sign

Containers

Household

Shaver

LED Strip

Photobox

Alphabet

Owl

Tool Box

Bambu Tools

Castles

Planters

Darth

Mandala

RepRack

Watch Stand

Bed stand

Photo

Turtles

Keychain

Kids

Skadis

Spools

Fire Hydrant

Hueforge

Build Plate Holder

KRX

Shelf

Vape

Dessicant Holders

Toys

Tools

Dragons

MultiColor

Space

Bambu Riser

Bambu