3dprintingguy

Scubafan

Update 10.01.2024Some people comented that the 0.6mm front isn't thick enough. I added a Version with a 1mm front. I hope that will solve the problem.&nbsp;&nbsp;I created my first Lightbox. :)Use my print profile, it printed perfect on my P1S.&nbsp;Electronics:I used a 12V LED light strip, a DC barrel connector, a 12 V power supply and some wiresThe power supply and the DC barrel connector I used<a target="_blank" href="https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.de/dp/B016LV20X6?ref=ppx_yo2ov_dt_b_product_details&th=1</a><a target="_blank" href="https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B09PD6J4BN?psc=1&ref=ppx_yo2ov_dt_b_product_details</a>&nbsp;Assembly:<ol><li>Print the Front and the Back part. There are no holes in the model, just add the holes via Bambu Studio. It depends on your light strip or if you want to use a barrel connector. U can also just use a drill.</li><li>Measure the length of the light strip.</li><li>Solder the wires and the barrel connector to the light strip (picture 1, 2 and 3)</li><li>Mount everything into the front part</li><li>Fore the back part I used normal aluminum foil with some double sided tape to reflect the light. See pictures</li><li>Close the box</li></ol>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_b7851640541d2.jpg"><figcaption>Picture 1</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_7897fa77bffc48.jpg"><figcaption>Picture 2</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_d910e85742451.jpg"><figcaption>Picture 3</figcaption></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_d70fcf0c1c1e3.jpg"><figcaption>Light without aluminum foil at the Back part, darker in the center</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_efb4a2cd1aa2b8.jpg"><figcaption>Light with aluminum foile in the Back part, light is more evenly</figcaption></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_95d87bfe26336.jpg"><figcaption>Add duoble sided tape to the back part</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/723578/2023-11-09_67df2d1d879d08.jpg"><figcaption>Cut the aluminum foil and tape it to the back part</figcaption></figure></td></tr></tbody></table></figure>&nbsp;

Star Trek Starfleet Command Lightbox

star trek

kurtvdv

Guitar stand:<ul><li>Simple to print model</li><li>Simple to assemble</li><li>Strong base for you precious guitar</li><li>3 files (Right - Middle - Left)</li><li>Customizable</li><li>No support needed</li></ul>Dimensions:<ul><li>This model holds a guitar up to 12,5cm wide</li><li>Ground width of left and right L-Stand: 18,5cm</li><li>Height of left and right L-stand: 20cm</li></ul>Tools needed:<ul><li>4 x M3 inserts</li><li>4 x M3 screws length 25mm</li></ul>If yo don't have M3 inserts or screws, you can alternatively use glue to put the parts together.&nbsp;Assembly guide:<ul><li>Print the 3 parts</li><li>Insert the 4 inserts in the middle part</li><li>Put the 3 parts together and put in the 4 M3 srews</li></ul>&nbsp;Optional - recommended:<ul><li>To protect the surface of you precious guitar, you can use felt pads.</li><li>To personalize this guitar stand, you can add a name in Bambu studio.</li></ul>Print time and used material<ul><li>Print time of 3 parts: 6 hours and 30 minutes</li><li>PLA Gold filament, approximately 225gr</li></ul>&nbsp;If you find my model useful, please like :-)

Guitar stand

guitar

253Bigfoot

There are eight dowel segments that you must fit into a box. You should be able to get seven pieces in with ease. What about the last piece?Print includes handy cover.Enjoy

Dowel puzzle 

puzzle

PrintMyDesign

Easy to print

EARRING RABBIT

jewelry

Nates Print Shop

This Grinch-themed lithophane was crafted using the Bambu Lab PLA CMYK Lithophane Bundle. It's designed specifically to fit the BL Frame.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

Grinch Christmas Lithophane

Litho

cruse2382

family of bears 5 bears 2 adults 3 children

family of bears 5 bears with tabs

to print

bambaxp

Melody whistle made in two versions. The first has only a free pin to insert inside the cylinder, the second has a fixing tab to prevent the pin from coming out. Printable in both 0.20 and 0.16

Slide Whistle

music

3DPrintable.art

Cute little mummy toy, with exaggerated head and round eyes with a playful expression.&nbsp;Please note that printing this model will require supports. Use the easy print profile by default. Just change the scale to print the size you need.&nbsp;Photos of dual color prints, one using a glow in the dark PLA filament. Be creative and share your results!&nbsp;For a more detailed print you might want to decrease the <a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/layer-height#effect-of-layer-height" rel="nofollow noopener">layer height</a> or experiment with<a target="_blank" href="https://wiki.bambulab.com/en/software/bambu-studio/adaptive-layer-height" rel="nofollow noopener"> variable layer heights</a>. In any case, expect the printing time to increase significantly, especially for multi-color prints.&nbsp;COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Cute Little Mummy

mini fig

Micro Center- Inland Filament

Legend of Zelda Tears of the Kingdom Master Sword&nbsp;Inland Filament Used: <ul><li><a target="_blank" href="https://www.microcenter.com/product/485632/inland-175mm-pla-3d-printer-filament-1kg-(22-lbs)-cardboard-spool-blue" rel="nofollow noopener">Blue PLA</a></li><li><a target="_blank" href="https://www.microcenter.com/product/486259/inland-175mm-pla-3d-printer-filament-1kg-(22-lbs)-cardboard-spool-silver" rel="nofollow noopener">Silver PLA</a></li><li><a target="_blank" href="https://www.microcenter.com/product/623232/inland-175mm-pla-silk-3d-printer-filament-10-kg-(22-lbs)-spool-gold" rel="nofollow noopener">Gold PLA</a></li><li><a target="_blank" href="https://www.amazon.com/dp/B00YQB85PG?ref=myi_title_dp&th=1" rel="nofollow noopener">Inland PLA on Amazon</a></li></ul>Printer Settings:<ul><li>22H 3M total</li><li>The Hilt may need supports, but with good cooling and bed adhesion you may not need supports</li><li>10% Gyroid Infill, 2 Perimeters, 45mm/s</li></ul>STL designed by <a target="_blank" href="https://www.instagram.com/dsk001_3d/" rel="nofollow noopener">dsk001_3d</a>

Legend of Zelda Master Sword

Cosplay

DV_nw---

Tirebowl

bowls

jjjlee

Remixed from the version uploaded by <a target="_blank" href="https://www.printables.com/@ericsnis" rel="nofollow noopener">@ericsnis</a>&nbsp;<h3>UPDATE (2023-11-03)</h3><ul><li>Added 10mm to overall length (better ergonomics</li><li>Changed the front edge angle for a lower approach angle as I needed a lower angle sometimes. This will mean added supports (see image below)</li><li>Thumb indentation 1mm deeper and improved shape for better printing</li><li>rounded off back corners.</li><li>There are two versions. One with pockets for magnets (SCRAPERITE HANDLE_V2_MAG), one without (SCRAPERITE HANDLE_V2)</li></ul>For magnets: I just used what I had on hand, which aren't very strong, but do the job. You can purchase it here: <a target="_blank" href="https://www.aliexpress.com/item/1005001614233816.html?spm=a2g0o.productlist.main.31.3ff54358OrqFbK&algo_pvid=01d34fbb-a435-4b82-b074-1d0c9d10b089" rel="nofollow noopener">Aliexpress</a>Pause at layer 24 (if using 0.2mm layer height) or 2.6mm, insert magnets using double-sided tape then resume.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/201207/2023-11-25_nb9jqi6w0i65.jpg"></figure>Supports: add to areas in green.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/201207/2023-11-25_lg2tz5f0r4n2.jpg"></figure>&nbsp;Iterative revision to both suit my aesthetic preferences as well as added a slight functional upgrade with the new grip texture on the sides.Images show it printed with:<ul><li>0.2mm layer height</li><li>Need supports under square holes under the blade + chamfered front edge</li><li>eSun PLA+, matte</li><li>Used 4 layers for wall thickness</li><li>15% Gyroid infill</li></ul>The blades fit super tight as per the original model.Created from STEP file for better resolution of curved features.

Scraperlite Plastic Razor Blade Handle V2

tools

mounty

<h2>NEW</h2>often requested: here is the new bidirectional version for people who don&#39;t want to be told what to do ;)<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Thank you for your support :)</boostcontent></boostme>&nbsp;&nbsp;funny clicky fidget ratchet with knurled knob on the one side and hex nut on he other.basic filamen- (instead of matt) providing better click and longer life due to less wear over time.carefully brake free the lever from the surface bevor assembly!&nbsp;new bidirectional version: <img class="image_resized" style="width: 58.12%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000058667/design/2024-07-01_d49dd8cd16879.png"><ul><li>heart sprint - works in both directions</li><li>symmetrical teeth for bidirectional action</li></ul>new longlife version: &nbsp;<img class="image_resized" style="width: 56.93%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000058667/design/2024-05-17_bbeb62285539d.png"><ul><li>double-spring ensures long life</li><li>open heart - better sound</li></ul>______________________________________________________________________________________________________V1<img class="image_resized" style="width: 48.17%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000058667/design/2023-11-05_33e37c728610e8.png">&nbsp;<ul><li>single lever provide more precise and predictable click</li><li>the spring-loaded lever on rotor allows more tention but also more spring travel = results in better sound and less wear over time</li><li>shaft guide compensate the tilt resulting from single lever</li><li>no supports needed</li></ul>origin:<img class="image_resized" style="width: 33.43%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000058667/design/2024-05-17_21342536db6db.png">kind regards <a target="_blank" href="https://emojipedia.org/de/oktopus" rel="nofollow noopener">🐙</a>

Ratchet Fidget

fidget

WagZPrintZ

A melted snowman.. you know the gig.. &nbsp;You'll need to heat the edges to give it that “melted” look! &nbsp;Scale to whatever size you wish, but keep thickness the same as original so it bends easier once heated!

Melted Frosty

xmas

SPStudio

Following the success of my <a target="_blank" href="https://makerworld.com/en/models/53742" rel="nofollow noopener">Pull Out Poop Chute design for the P1P P1S X1C</a>, here is my new version for the A1 Mini.&nbsp;<h2>Highlights:</h2>Easy to Print - Separated into 2 plates for easy print from Makerworld AppLarge Size - reduce emptying frequencyStability++ - The chute is being held to the side of the printer with 1 or 2 original screws under the printerPull Tray Design - Easy to empty chuteNon Purge Baffle Design - This chute do not use any Baffle and just a wall to let poop bounce off, my test shows that if a baffle is installed it may cause a significant amount to pile up the side, without the baffle the poop may pile up too but the movement of the arm will compress them down (without a baffle in the way) which is a + way to handle huge amount of poop like shown in the product photos.&nbsp;However you can choose to attach a Baffle instead of the Deflector (Long Pink Plastic in photo) but i would think the deflector will work properly.&nbsp;Please don't use silk material. Thank you.&nbsp;&nbsp;<h2>Available on 2 versions. </h2>Please choose carefully the version you want. Large or Smaller Version.&nbsp;<ul><li>If you own the P or X series or a large printer, you can choose the Large Version so it can store even waste before needing to empty the bin.</li><li>If you own just the A1 mini, please choose the A1 Mini Smaller Version, Same design just smaller to fit the A1 Mini Bed</li></ul>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2023-11-27_439c8260cb703.jpg"></figure>&nbsp;<h2>Installation Instructions:</h2>Use a small philips screw driver or a small allen key poke through from the tp so the support inside the hole will come out easily<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2023-11-27_a0296a7c75832.png"></figure>Proceed to remove the 1 or 2 screws from the bottom of the machine then put them through the 1 or 2 hole on the tray and screw it back in. It may NOT tighten but its ok.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2023-11-27_622b2109791f1.jpg"></figure>Then take the Deflector piece (Pink in the below photo) and use a dab of glue and stick it at the side of the poop chute. Please don't use too much glue, may cause damage to the print walls and it wont be pretty anymore.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2023-11-27_18ff1d017387f.png"></figure><h2> </h2><h2>End product should look like this when done.</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2023-11-27_93ea1b5116f83.jpg"></figure>That is all. Enjoy your new large & convenient pull tray poop bin.&nbsp;&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">AMS FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:719.41px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) AMS Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For AMS Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:728.247px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- AMS Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external PTFE tube and allow the most smooth, least friction angle to go into the AMS buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:726.528px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 AMS Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external PTFE tube and allow the most smooth, least friction angle to go into the AMS buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:733.906px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- AMS Fix - Stack the AMS on tp (Using a carefully measured holder to hold the PTFE in a curved angle that will allow filament to go through with the least possible amount of friction when the AMS is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:742.552px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- AMS Buffer PTFE Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the PTFE tube exit the AMS buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:753.212px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 AMS Buffer Right PTFE Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the PTFE tube exit the AMS buffer to move into the printer extruder. Easy Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:763.194px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder AMS Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the PTFE tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:787.569px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder AMS Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the PTFE tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:787.101px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with AMS Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:802.934px;"><img src="https://makerworld.bblmw.com/makerworld/draft/381835/2023-11-19_96f9eed020e9b.gif"></figure>

A1 Mini Pull Tray Purge Bucket Bin

a1mini

digitallyforgeddesigns

Looking for a piece of pop culture to add to your 3D design collection? Look no further than this intricately designed Mandalorian N-1 Starship 3D model available on makerworld.com. This model is a meticulous re-release of the iconic Starship seen on The Mandalorian series, made exclusively for personal use. Immerse yourself in the Star Wars universe with this fan art model, featuring the highest level of attention to detail and accuracy. Various screen-captured images from the series have been used as reference for this design to make sure every engine part and gun detail is as accurate as possible. Browse through our available images to understand the quality of this model further. For any fan of The Mandalorian, this 3D model is a must-have addition to your collection. Find it on makerworld.com by searching for the "Mandalorian N-1 Starship" under the "Pop Culture" category. Let your love for the series bear fruit in this magnificent 3D model offering.

Mandalorian N-1 Starship

starwars

喵喵mya

层高0.1，首层0.1， 100%填充打印 标签区域尺寸为30mm*40mm,2mm圆角&nbsp;原始文件中有F3D文件，可以使用Fusion360进行二次创造&nbsp;色卡本身需要需要使用0.1的层高，起码要保证首层是0.1层高，100%填充，收纳盒对打印配置要求不高，默认即可，盖子推荐使用透明PETG材料打印&nbsp;为了适配gridfinity，添加了一个长度更短的版本，这个版本的收纳盒附带了gridfinity的模块，底部可以预留了4x2mm的磁铁的槽位，如果不需要这个模块，也可以将它移除&nbsp;&nbsp;0.1mm layer,0.1mm first layer,100% infill&nbsp;The label area size is 30mm*40mm with 2mm rounded corners&nbsp;Click the Raw Model Files button to download the F3D file, Edit with Fusion360&nbsp;The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing&nbsp;To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/316654/2023-12-28_d7e7bab1f51b.png"></figure>

打印耗材色卡 Filament Sample Card 

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

toys

JDJDJD

<h2>Meet The Shifty!</h2>&nbsp;The Shifty allows you to quickly and easily center your build plate on Bambu Lab 3D Printers (X1C/P1S/P1P Style).&nbsp;This is the first and original Build Plate Guide ever to be shared on MakerWorld.&nbsp;As a brand new product, I&#39;ve meticulously designed the Shifty to make your life easier, every time you insert your build plate.&nbsp;<h3>How it works:</h3>&nbsp;The Shifty build plate guide increases the contact area of the built-in plate guides. This means you have more room for error when sliding your plate into place.&nbsp;It also eliminates cases where the plate skips over the existing guides, or lands on top of them uncentered and un-level which can cause failed prints.&nbsp;The increased guide height also allows you to slide the plate in at a greater angle, which is more comfortable and minimizes instances when the plate clamps down before it&#39;s properly positioned.&nbsp;<h3>How to use:</h3>&nbsp;Slide your plate in like normal, but aim the back left corner of your plate towards the Shifty. Once you make contact it will take over and shift your plate perfectly into place.&nbsp;The Shifty is low profile and clips to the back left corner of your bed, out of the way from activity.&nbsp;<h3>Installation:</h3>&nbsp;Step 1 - Connect The Front:&nbsp;Insert the front tab into the notch located at the front of the built-in guides.&nbsp;Step 2 - First Click:&nbsp;Wrap it around towards the back and press so it “clicks” into place. (see video below).&nbsp;Step 3 - Second Click ←- Double Check This One:&nbsp;After you hear the first click as shown in the video, you may have to press down on rear hook (right side of back edge) to seat it properly into place. This is the second click. I recommend pressing down in the back even if you think you have it in place just to make sure.&nbsp;When properly installed, the Shifty will be very snug, perfectly level, and without distortion.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000083480/design/2023-12-04_8cba772444acc.gif"></figure>&nbsp;&nbsp;If you have any questions, feel free to direct message me.&nbsp;&nbsp;<h3>Tips and Notes:</h3><ul><li>The Shifty is designed to look cool and print beautifully. The supports are custom tailored and break away easily in one piece with a simple twist for most materials. For some materials, you can simply twist counterclockwise while it&#39;s still on the plate and it will cleanly break away.</li><li>To replace or remove, access it from the bottom side of the bed and press backwards on the back edge until it unclips.</li><li>When properly installed, the Shifty will be very snug and perfectly level. If it isn’t, study it&#39;s shape and check the back edge, you may need to push it down on the back edge so it snaps into place.</li><li>If you print a lot of high-temp materials, consider making a Shifty in PETG, ASA or ABS. These profiles are tested and also available.</li><li>At this time I&#39;m releasing the left side only. I have a right side model completed, but am not releasing it for now since the left-only approach works well and keeps the Shifty away from the back right purge strip activity. Feel free to mirror a right side in Bambu Studio for your own use, but please don&#39;t upload profiles with the right side mirrored at this time.</li></ul>