3D Print 4U Studio

NotMyButter

Drip bracket for the Elegoo Saturn 4 Ultra.

Elegoo Saturn 4 Ultra Drip Bracket

Saturn

richienko

Few minutes of printing to tame your cable monster. I uploaded MANY variations in the zip file.&nbsp;Basic variations are uploaded as models, all of the other ones are in the Zip file.&nbsp;Zip file contains all variations in folders in multiple levels: thickness/width/cablesize/. For example if you need large, clip for 10mm cable, you can go inside folder “thickness_1_29” inside it is “width_20”, in which is folder “cable_10” and there you can choose which lip size you want.Note that clips with thickness 2.19 are quite stiff, IMHO the 1.29 thickness is ideal.Hole for screw is 4 mm or 1/8".All clamps have slightly rounded edges to reduce the possibility of damage to your precious cables.&nbsp;Before you ask:I chose hexagonal holes for screws because I noticed many people have issue with vertical round holes.&nbsp;If you need other sizes or dimensions, just ask in comments. I got you. ❤️&nbsp;TODO:<ol><li>I'll make version for 2 screws to hold cable where you want to.</li></ol><h3>Printing instructions</h3>PLA is totally fine, but PETG is better as it's more flexiblePretty much use standard 0.2 mm standard profile.I recommend to use glue if you are printing thin ones without brim with PLA. Test one before printing large amount ;)<h3> Filename</h3>Model filename contains all dimensions:th1_29_w20_cable30_lip20.stl&nbsp;th1_29 - material thicknessw20 - clip widthcable30 - space for cable (diameter of inside hole)lip20 - lip where screw hole is (I actually have no idea how it's called properly, sorry)&nbsp;Color matched dimensions for better visualisation:&nbsp;<figure class="image image_resized" style="width:82.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/95594/2023-12-09_6cb1da1f23f81.png"></figure>&nbsp;<h3>Wall thickness</h3>Material thickness, higher value means more stiff and more durable cable clip. I tried to match default line width settings for 0.4 standard nozzle size.&nbsp;Variations:<ul><li>0.84mm (th0_84) for 0.4 nozzle: 2 walls printed</li><li>1.29mm (th1_29) for 0.4 nozzle: 3 walls printed</li><li>2.19mm (th2_19) for 0.4 nozzle: 5 walls printed</li></ul><h3>Width</h3>Clip size. Choose larger one if you need to direct cable somewhere.&nbsp;Variations:<ul><li>8 mm (5/16")</li><li>12 mm (~1/2")</li><li>16 mm (5/8")</li><li>20 mm (~13/16")</li></ul><h3>Cable size</h3>Size of hole/arc. Space for cable. Room for conduit. You name it.&nbsp;Variations:<ul><li>4 mm (1/8")</li><li>5 mm (3/16")</li><li>6 mm (~1/4") - should fit Cat6 regular UTP (unshielded) cable</li><li>8 mm (5/16")</li><li>10 mm (~3/8")</li><li>15 mm (~5/8")</li><li>18 mm (~3/4")</li><li>20 mm (Just short of 13/16")</li><li>25 mm (1")</li><li>30 mm (1 3/16")</li></ul><h3>Lip</h3>If cable is sturdy, choose smaller lip as it should hold cable closer to the place of attachment. Holding larger lip is better (at least with my fat fingers).&nbsp;Variations:<ul><li>15 mm (~5/8")</li><li>20 mm (Just short of 13/16")</li></ul>&nbsp;If you want to identify cables by clip I can think of three possible variants: 1. choose large lip and add text in the slicer.2. put sticker on the lip and write on that with sharpie (sharpie directly on the print will result in smudge)3. write on the lip with oil based tech pen.

Cable clamps/clips

Storage

Storage tray for 9x Medium sized Dungeons and Dragons miniatures, Star Wars Imperial Assault, Star Wars Miniatures and other similar-sized based minis.&nbsp;Printed in PLA 0.6mm Nozzle, 2 walls, 15 % infill.&nbsp;To be used with the Miniature Storage for Kallax, to be uploaded soon&nbsp;&nbsp;Related Prints:<a target="_blank" href="https://makerworld.com/en/models/403020#profileId-304696" rel="nofollow noopener">https://makerworld.com/en/models/403020</a> Medium-sized miniatures tray<a target="_blank" href="https://makerworld.com/en/models/403020" rel="nofollow noopener">https://makerworld.com/en/models/403025</a> Huge Sized miniatures tray<a target="_blank" href="https://makerworld.com/en/models/410684" rel="nofollow noopener">https://makerworld.com/en/models/410684</a> Large Sized Miniatures tray(coming soon) Kallax Storage Shelves

D&D Medium Miniature tray

Kallax Miniatures Storage

Turtleyawesome

This is another item I needed to create in my ever evolving pursuit of the perfect airbrushing setup! (Hence the unfinished plywood currently!) It was made to be able to route the airbrush hose away from my chair and not get tangled up in the armrests. Two size 4 screws were used so you will need to just use the right length for the material you are screwing into. No special parameters I just did it with 4 walls and 25% infill. It was printed it flat on the build plate and just did a little tidy up of the hole afterwards.I hope this helps someone with their setup too, many thanks!

Airbrush Hose Guide

Airbrush

tgsparky77

Thought I'd make a themed bookend. This is my first version. Need to glue the base to the body. Its a little hard to glue them square but it can be done. I'll design another that will be a lot easier to glue but thought I put this one up for now.&nbsp;V2 Added a slot in the body and a tab in the base to make it easier to glue. Haven't tried it yet but it should work. I allowed for 0.2mm gap incase peoples printers aren't too dialed in.

Star Wars Book Ends

Star Wars

toolmantim313

Same setup as the 10pc plate holder, but in a compact 5 plate model! Link to the 10pc setup below. The model picture is of the 10 plate version attached to the side of the X1.&nbsp;Simple rack to hold up to 5 build plates. Screws together with 3mmx14mm socket head cap screws. I included both 3mf and stl files with a multi color stand 3mf file. The 10 plate holder stands on it's own, but this 5 plate version will most likely need the stands if you wish to have it vertical, or opte to use 3m tape and attached it to the side of the X1 like I did. Although since the stand does bolt onto the rack, you can use it to mount to the underside of a bench or shelf in the vertical position. &nbsp;And be sure to check out my Hex system adapter mounts so you can mount the rack to the a hex wall!https://makerworld.com/en/models/28605#profileId-24995&nbsp;10 pc Rack systemhttps://makerworld.com/en/models/19526#profileId-18252

Saturn

Storage

Kallax Miniatures Storage

Airbrush

Star Wars

Bambu