3Demoniak

Catapult Crush!Discover the ultimate 3D-printable game where players construct their castles using stackable blocks, towers, dungeons, and a fully functional gate complete with a removable portcullis !Then, unleash the chaos as you demolish your opponent&#39;s fortress with a working catapult and soft projectiles! Choose your side: stone versus wood, and select from 6 diverse characters (3 female, 3 male, with customizable helmets and armor).With its engaging gameplay, Catapult Crush is perfect for all ages, starting from 4 and up! Get ready for endless fun and strategic battles.&nbsp;Catapult Design : NGREGULSKI https://cults3d.com/en/3d-model/game/catapulte-ngregulski Gate Design : StandardOfUr https://www.thingiverse.com/thing:4804435 Characters Design : BriteMinis <a target="_blank" href="https://briteminis.com/" rel="nofollow noopener">https://briteminis.com/</a>Dungeon Design : VogMan <a target="_blank" href="https://www.printables.com/fr/model/685183-vogland-castle-tower-support-free" rel="nofollow noopener">https://www.printables.com/fr/model/685183-vogland-castle-tower-support-free</a> All the Designs are original one, no remix. More info on designers pages

Catapult Crush

Construction

Int-gineering

This Star Wars-themed toothbrush holder stand celebrates the duel between Anakin Skywalker and Obi-Wan Kenobi. Designed with silhouettes of the two iconic characters engaged in battle, the stand holds modeled replicas of Anakin's, Obi-Wan's, and Darth Vader's lightsabers, each serving as a unique slot for a toothbrush. It's a functional piece capturing the moment of Anakin's turn to the dark side.&nbsp;&nbsp;If you have 1 AMS, stop the print at 45mm and change filament, the blue and light gray, can be exchanged for red and gold for the buttons and parts of obiwans lightsaber.&nbsp;I don’t have an AMS, so the entire thing was printed in a single color, still came out great. The version that doesn’t require supports losses a bit of detail, since a lot of chamfers and fillets are required to remove 90-degree overhangs. The version that uses supports have not been tested yet, but its detailing is more accurate to the real thing.&nbsp;The lightsaber hilts should be big enough for a standard toothbrush.A single hilt version for electric toothbrushes will be made as well.&nbsp;&nbsp;&nbsp;&nbsp;

Lightsaber Toothbrush Holder single print

salle de bain

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

Zelda

JulesPrint3D

Remix of the Book Barn / Book Stand / Book HolderNow with 9cm cork coaster perfect fit for IKEA365 cork coaster 9cm.→ you can also use it without the cork coaster no support needed, round corners dimensions: 230 x 110 x 161mm <figure class="image image_resized" style="width:24.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/649128/2024-02-14_93ca5d056bc03.jpg"></figure><a target="_blank" href="https://makerworld.com/en/models/181248#profileId-199526" rel="nofollow noopener">You are looking for the 10cm cork coaster version? Click here</a>_________________________________________________________________Do you like drinking coffee or tea while reading a book? → put it on the holderAre you tired or need a nap? → place the book on the holderDo you need reading glasses? → place them in the holder

Book Rest/Barn/Holder, 9cm IKEA cork coaster

Livres

Nightthorn

Found this sword and shield at this link by ZoltanKi on Thingiverse: <a target="_blank" href="https://www.thingiverse.com/thing:3959727" rel="nofollow noopener">https://www.thingiverse.com/thing:3959727</a> <a target="_blank" href="https://www.thingiverse.com/thing:3935757" rel="nofollow noopener">https://www.thingiverse.com/thing:3935757</a> It didn't have a good wall mount for it, so I created one in Tinkercad. Make sure to scale ONLY THE SHIELD to 200% (the uploaded 3mf file is scaled and colored for you). Other than that, everything should fit together and mount nicely. The sword can be slid in behind the shield. I opted to mount my sword between the shield handle and the shield holder, but you can use the cut out option to slide it in further.. i just prefer the handle being out more.

Zelda Master Sword/Shield/Wall Mount

technerd

I&#39;ve made a cute shadow box from Basic PLA for valentine&#39;s day with various designs for the couples. Choose which couple you like most and put a total of 6 inserts (textured side facing down) into &#34;case_front&#34;. They have numbers from 001-006 on the build plates, and should easily slide down into the casing.&nbsp;Depending on which lights you want to use, USB or battery powered you can put fairy lights through the hole of &#34;case_back&#34; and fix them with some tape or use the pegs that are around the hole to form a circle. Check the photos for details. Fix the battery box with double sided tape into it&#39;s place. I bought a 3 meter fairy light (warmwhite) that uses 3x AA batteries so they last way longer than the version with the button cells. For the Amazon link to the warmwhite or RGB fairy lights - scroll all the way down.&nbsp;UPDATE 2024-03-27: created a collection with all my available inserts for the shadowbox. They can be combined with each other <a target="_blank" href="https://makerworld.com/en/@technerd/collections/962148" rel="nofollow noopener">https://makerworld.com/en/@technerd/collections/962148</a>&nbsp;UPDATE 2024-02-12: included STEP files for “007_diy_empty_insert” and &#34;case_back_003_RGB_fairy_lights&#34; if you want to create your own inserts in Fusion360 or change the backplate to fit your own lights.&nbsp;UPDATE 2024-02-02: new “case_back_003_RGB_fairy_lights.stl” now compatible with both models 3m/10ft &amp; 5m/16ft RGB fairy lights - I made the pegs longer &amp; bigger circle diameter to fit the bigger battery box from RGB lights.&nbsp;UPDATE: Btw. you can also use RGB fairy lights - here is what they look like in different colors:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-26_002518b3be6b18.jpg"></figure>&nbsp;Print the &#34;case_cap&#34; 2x and slide them over the front and back of the heart. They&#39;re press fit and should stay in place, if not use some drops of glue or double sided tape. The overall size of the box is 215mm x 215mm.&nbsp;For perfect results make sure to use the golden textured PEI plate and calibrate your filament.Check out the Youtube Video below on how to assemble it.&nbsp; Copyright:All my designs are protected by copyright. By downloading, you agree to use the files for personal purposes only. This means that you do NOT have the right to sell 3D prints of the digital files, including selling products made from molds. If you want to sell my prints commercially and legally, you can join my Patreon: <a target="_blank" href="https://www.patreon.com/technerd863" rel="nofollow noopener">https://www.patreon.com/technerd863</a> The digital files (STL and other formats) may never be resold, shared, remixed or given away.&nbsp;&nbsp;I will try to add new inserts for the box from time to time. Just check my profile or my collections for new uploads like the new castle Neuschwanstein inserts. Until now these are the included designs here. Happy printing!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-01-25_167328f55390e.jpg"></figure>&nbsp;Btw. these are the fairy lights (warmwhite and RGB) that I got from amazon. Size of the battery box is 74mm x 51mm x 19mm. It has an integrated timer and stays on for 8 hours, so the 3x AA batteries should last 1-2 months. &nbsp;3M warmwhite <a target="_blank" href="https://amzn.to/3V6ZIdr" rel="nofollow noopener">https://amzn.to/3V6ZIdr</a>5M RGB with remote control <a target="_blank" href="https://amzn.to/44UPHDw" rel="nofollow noopener">https://amzn.to/44UPHDw</a>(I may earn a commission if you use the above Amazon Affiliate links. This will help me to upload the designs for private use for free)&nbsp;The new “case_back_003_RGB_fairy_lights” is compatible with both models RGB and warmwhite!&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_87cee228f36e2.jpeg"></figure>&nbsp;New Inserts! Castle Neuschwanstein. Download them here: <a target="_blank" href="https://makerworld.com/en/models/167285" rel="nofollow noopener">https://makerworld.com/en/models/167285</a>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000156728/design/2024-02-02_736a10798e406.jpg"></figure>&nbsp;

Lovers Valentine Day Shadowbox

Shadow box 

Faite une blague à vos amis ou aux livreurs de colis :D

Panneau Sonnette cassée

Humour

creolet.marco.markl

The "NautiCup" is a versatile pencil holder designed for desks in children's rooms, home offices, or workplaces.&nbsp;Complete information about this project, including links to both free and licensed versions, is available on its dedicated page in my Wiki. If you like my work, please hit "Like" and don't forget to follow my profile.&nbsp;Wiki (English): <a target="_blank" href="https://wiki.creolet.com/en/projects/nauticup" rel="nofollow noopener">https://wiki.creolet.com/en/projects/nauticup</a> Wiki (German): <a target="_blank" href="https://wiki.creolet.com/projects/nauticup" rel="nofollow noopener">https://wiki.creolet.com/projects/nauticup</a>&nbsp;Slicer Print SettingsThe print settings are simple, but specific, and are designed for a 0.4-mm nozzle:<ul><li>Wall Generator: preferably Arachne</li><li>Walls: 3</li><li>Bottom-Layer: 3</li><li>Top-Layer: 3</li><li>Infill: 0% (Zero Percent)</li><li>Ensure Vertical Shell Thickness: Off</li></ul>Collection of all NautiCup Pencil holders<a target="_blank" href="https://makerworld.com/en/u/1762145450/collections/14978" rel="nofollow noopener">https://makerworld.com/en/u/1762145450/collections/14978</a>&nbsp;

NautiCup - Rope Pencil Holder (3 Compartments)

Décoration

fay3dlab

So i've been delaying making this gate for months now since my nephew ask for me to make him one.. i was busy and it didnt match any contest i know.. until the "Make some noise contest" from instructables.. so im making a muscial gate that play music and sound effects when it opens..<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=lTGXbfN7cJQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/lTGXbfN7cJQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Instuctions on how to make them can be found here: https://www.instructables.com/Jurassic-World-Musical-Gate/

Jurassic World Musical Gate

Cinéma 

A beautiful Wall-e and Eve keyring !

Wall-e Eve Keyring

Porte clés

TheBear

<h3>A fancy party requires fancy accessories - so, show off that beautiful first layer! </h3>Presenting the foldable Bow Tie!Easy to print, easy to assemble and easy to enjoy! Inspired by my <a target="_blank" href="https://makerworld.com/en/models/70917#profileId-75180" rel="nofollow noopener">Christmas Gift Bow</a> design. &nbsp;Personally, I don't own a bow tie - but I still like the idea of wearing one for New Year's especially. And if I'm going to wear a fake bow tie, I atleast want it to look special and fancy. So, here we are!&nbsp;&nbsp;<h2>Assembly</h2>Assembly is very straight forward, and can be seen in the GIF below. Simply fold the sides inwards and slide them onto the locking peg. Bend the ribbon around to the back and slide the tab into the slot. The Bow Tie is now assembled!<img src="https://makerworld.bblmw.com/makerworld/draft/275103/2023-12-14_0f74972131a65.gif"> &nbsp;&nbsp;<h2>Putting On and Removing the Bow Tie</h2>After assembly, I highly recommend you to slightly bend the two corners marked in the picture below upwards. This enables the Bow Tie to be easily slid onto your shirt button.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/275103/2023-12-14_fcffa4e0061ea.jpg">&nbsp;&nbsp;And as illustrated in this short GIF, you can easily slide the ribbon onto a shirt button:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/275103/2023-12-14_b5591a0fa85d7.gif">&nbsp;&nbsp;&nbsp;&nbsp;To remove the Bow Tie, you simply need to pinch it on the bottom and push it upwards a bit, like so:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/275103/2023-12-14_484ec26958ae4.gif">&nbsp;&nbsp;&nbsp;<h2>Print Settings</h2>If you decide to slice the model on your own, then it is crucial that you change the infill pattern, so it doesn't align with the folds. If the bow is oriented on the build plate at a 45 degree angle, please use 15% Infill Direction. This way, the lines won't run parallel to the folds.<img src="https://makerworld.bblmw.com/makerworld/draft/275103/2023-12-14_741c2cf0f669c.png">&nbsp;&nbsp;&nbsp;Enjoy and Happy Printing!

Foldable Bow Tie!

Fête

GhengisAhn

Zelda Hylian shield. You can print these out in multiple pieces or as a single unit. Pictures of the printed parts are multiple pieces and then press-fit together. &nbsp;Handle is included to epoxy onto the back and works as a stand for a desk, or to shield parry annoying office shenanigans.

Hylian shield from Zelda

Nintendo

BEAMink

Spiderman name tag. Add name in Bambu Studio

Spiderman Name Tag

Marvel

SnapPrint3D_SuperCrazyPrints

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready! <a target="_blank" href="https://www.supercrazyprints.com/" rel="nofollow noopener">https://www.supercrazyprints.com/</a>&nbsp;Check out my other models: <a target="_blank" href="https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models" rel="nofollow noopener">https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models</a>

Pokemon-Chibi Eevee (NO SUPPORT)

Pokémon

Trifcho

Tic Tac Toe game with a twist - big ghost eat small ghost. Each player starts with 9 ghost of the same color - three of each size. Like tic-tac-toe, line up 3 in a row to win! Players can gobble up their opponent’s pieces to take their place.

Tic Tac Toe Game with a twist

Jeux

Olivier3dPrint

A deatshstar lamp from the starwars saga&nbsp;Stand can be found here : <a target="_blank" href="https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files" rel="nofollow noopener">https://www.printables.com/fr/model/23859-designer-lithophane-moon-lamp/files</a> &nbsp;You can buy me a Tea (i do not like coffee ;) ) here <a target="_blank" href="https://ko-fi.com/olivier3dprint" rel="nofollow noopener">https://ko-fi.com/olivier3dprint</a>&nbsp;If you want using the BambuLab Led Kit 001, <a target="_blank" href="https://makerworld.com/en/models/431731#profileId-336300" rel="nofollow noopener">i made on for this</a>

StarWars deathstar lithophane lamp

Lampe

LayerModels

<h4>Create your own name in 3D!</h4>The file contains the complete alphabet in the standard font. Print the letters you need and snap them together. Don't forget to print the endcaps to complete your nametag.You can even use the letters to print your own message or slogan.&nbsp;Other fonts are available <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/3d-letters" rel="nofollow noopener">here</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/3d-letters" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/364477/rich_content/68da15ea-d698-41a1-8dbf-c369975fbdd6/thumbs/cover/800x1208/png/overview-fonts.webp"></a>If you like my work please consider supporting me by downloading one of these cool fonts for less than the price of a coffee, thanks!&nbsp;Print settings&nbsp;The 3D letters were tested in PLA with 0.2mm layer height. Print in the given orientation and no support is needed. Ensure a good first layer adhesion with sufficient bed temperature and slow first layer speed. Avoid elephant footing.&nbsp;----------&nbsp;Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

3D Name from letters - Standard font

Personnalisation 

braga3dprint

Unleash the power of Dragon Ball Z with this dynamic 3D printable lightbox showcasing its iconic logo. Crafted with precision and flair, this emblematic design pays homage to the legendary anime series. Ideal for fans and collectors, this Dragon Ball Z-themed lightbox radiates energy and nostalgia, infusing any space with the spirit of adventure and martial arts prowess emblematic of the beloved series. If you don't have or don't want to install LED's you can just glue the parts together and have an awesome sign! WARNING!- remove purge line at the beginning of the print, it may interfere, specially with bigger prints! <img src="https://i.redd.it/uo838wkstaqa1.png">&nbsp;&nbsp;Materials and tools: - glue gun - aluminum tape - led strip (here is the one I <a target="_blank" href="https://pt.aliexpress.com/item/1005004253095880.html?spm=a2g0o.order_list.order_list_main.16.1df1caa45b098E&gatewayAdapt=glo2bra" rel="nofollow noopener">use</a>): simple 1m white led USB- soldering iron (optional)&nbsp;RECOMMENDATIONS- use a textured PEI sheet - remove purge line at the beginning of the print! - use the print profile, it has quite a few setting changes that help achieve the best results - make a hole for the USB strip wherever you like it best with a soldering iron, drill or in the slicer- use the aluminum tape on the inside of the backplate to help with light diffusion - glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible Bambu Studio Settings: I always recommend using the print profile I provided since it has settings with which I've been able to get the best results. If you choose not to here are the main slicer settings I recommend: - preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 to 1.08 - Quality → Wall generator → Arachne - Quality → Wall transitioning threshold angle → 50º - Strength → Advanced → Infill/wall overlap → 20% to 25% - Quality → Advanced → Avoid crossing walls - Increasing retraction / reducing temperature can help reducing wisps - Order color printing from lightest to darkest color How to make a hole in Bambu Studio:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=OsA23WCxRtg"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/OsA23WCxRtg" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Assembly video:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=QNsShLmXYh0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/QNsShLmXYh0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;How to print without AMS:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=RUSTGxOOS_U&t=102s"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RUSTGxOOS_U?start=102" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Dragon Ball Z LightBox LED Lamp

Light Box

planpa3d

I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.Just can’t wait to see the Movie being released this year!!Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.NOTE: This version does not include the Switch game holder insert, the hex pieces to hold the spikes, nor the spiked pieces themselves.If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,<a href="https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer" rel="nofollow">https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer</a>&nbsp;I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm<a href="https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1" rel="nofollow">https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1</a>&nbsp;All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together. The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.With the trim printed and assembled, it should be glued to the completed bottom shell.When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.You can follow me on instagram, <a href="https://www.instagram.com/pla.n.pa/" rel="nofollow">https://www.instagram.com/pla.n.pa/</a>to find out what I designs I am currently working on.&nbsp;If your interested in selling prints of my designs, become a Patreon supporter here…<a href="https://www.patreon.com/planpa3d" rel="nofollow">https://www.patreon.com/planpa3d</a>&nbsp;Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…<a href="https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert" rel="nofollow">https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert</a>&nbsp;Happy Printing,Jeremiah&nbsp;

Turtle shell container

Mario

Chris Pirillo

Introducing the adorable 3D printable Baby Yoda (Grogu) model, a must-have collectible for Star Wars fans and 3D printing enthusiasts alike. This captivating design perfectly captures the irresistible charm of the beloved character from the hit series "The Mandalorian."Original image generated in MidJourney, STL’ed in HueForge.&nbsp;This meticulously crafted flat model brings Baby Yoda to life with astonishing accuracy. The intricate details of Grogu's endearing facial features, large round eyes, and pointy ears are flawlessly replicated, showcasing the remarkable craftsmanship of the design. Or… close enough.&nbsp;Once printed, this Baby Yoda model becomes a versatile addition to your Star Wars collection. Display it on your desk, shelf, or even use it as a charming decoration for special occasions. Its flat design allows for easy placement and transportation, making it an ideal gift for fellow Star Wars enthusiasts or anyone captivated by the lovable creature from a galaxy far, far away.&nbsp;Let this 3D printable Baby Yoda (Grogu) model bring joy and a touch of Star Wars magic into your life. Whether you're a fan of the series, an avid collector, or simply looking for an exciting 3D printing project, this model is sure to delight and impress everyone who encounters it.&nbsp;Obviously, this description was written in AI, too. LoL&nbsp;I sliced this at a .08mm layer height. <ul><li>Black to layer 4</li><li>Dark grey to layer 6</li><li>Light grey to layer 25</li><li>White to layer 38</li></ul>

Star Wars (Inspired) "Yoda Baby for Me" HueForge Grogu

Star Wars

MEAF designs

Easy to print and fun to make!Perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter and details are separated files so you can print it in different colors even without an AMS.&nbsp;Designed two styles for every “O”. so you can choose what you like.<ul><li>First "O": choose between santa claus or tree ornament</li><li>Second “O”: choose between snowman face or snowman body</li><li>Third “O”: choose between reindeer or christmas elf</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_n84evi4tipld.gif"></figure>&nbsp;split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_o1xtzxx4tz4i.png"></figure>&nbsp;&nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for letters and base. --- 0.2 for detailsNozzle diameter: 0,4mm or 0,6mmInfill: 10 -12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so you will need some glue depending on your printer and/or filament calibration&nbsp;&nbsp;&nbsp;

Christmas hohoho Sign

Noël

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>

Ghost Booh

Halloween

If you like my work, support me by leaving a like !Get access to really cool models every months on my PatreonAnd don't Forget to Follow me !<a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener"><img src="https://dreamityourselfmusician.com/wp-content/uploads/2020/10/patreon-france.jpg" alt="BODY3D"></a><a target="_blank" href="https://www.tiktok.com/@body_3d" rel="nofollow noopener"><img src="https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSrfIHeAYT6KeLQTVHxvXORYsILY6oVXlNVmg&usqp=CAU" alt="BODY3D"></a> <a target="_blank" href="https://cults3d.com/en/users/BODY3D/3d-models" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_6b0967a6c4cbc.png"></a> <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_63b5664660755.png"></a>

Kenny Door Stop

South Park

flexi.factory

This Flexi Panda is an articulated print-in-place model that needs NO supports. The stand is printed in 3 parts and easily snaps together with no need for glue Included are 7 files: -Panda -Bamboo stick (for panda to hold) -Stand Platform -Stand Base -Stand ladder -Painted Bambu AMS Panda -Painted Bambu AMS Stand Also Optimized for AMS, meaning if you are using a Bambu Printer with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience! Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports. ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.To legally sell PRINTED models, you may obtain my permission through this link:<a target="_blank" href="https://www.patreon.com/FlexiFactory" rel="nofollow noopener">https://www.patreon.com/FlexiFactory</a> or www.myminifactory.com/users/FlexiFactoryPlease help support the creative work of each 3D artist and NEVER share or sell a digital file.<h2>3D PRINTING SETTINGS</h2>Easy Print. Can be scaled upNo Supports (adding supports will hinder functionality) Mostly Print-in-place (the stand snaps together) 15% infill I always like to use 3 walls PLA works great

Flexi Factory and Bambu Lab Collaborative: Panda Bear and Stand

Flexi

GuyH77

NOTICE: I have learnt a lot from this design. As a result I have created a new base ramp which is now released. This design is still valid and I will continue to maintain it. It serves it&#39;s purpose of the original designed goal. I designed this scoop to aid removal of larger debris that could interfere with the bed movement. My new design is an attempt to try and improve on the removal of very small bits of plastic. That is one criticism of this design. &nbsp;Alternative Design: Only tested by me so far: <a target="_blank" href="https://makerworld.com/en/models/507985#profileId-423740" rel="nofollow noopener">https://makerworld.com/en/models/507985#profileId-423740</a>&nbsp; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -&nbsp;A simple two part print that forms a ramp at the front of your Bambu Lab printer making it easier to scoop out any stray bits of plastic.&nbsp;I printed standing up with a brim. The reason for this orientation is to get a nice smooth wall and strong clips. Split the stl to objects.&nbsp;The two halves should slide together with a snug fit. The clips help locate the scoop in the base of your printer.