3DbyRayRay

Mam1IQ

This 3D printed kitchen cabinet or drawer handle is designed with 96 mm hole spacing, perfectly blending functionality and modern design. &nbsp;I replaced all the handles in my kitchen with these models, and they have been operating smoothly for six months. Made from durable PLA matte filament, these handles not only ensure longevity but also offer a sleek finish. &nbsp;A noteworthy benefit of these 3D printed handles is their ease of replication. If a handle ever breaks, you can simply print a new one, making this a practical and sustainable choice for any home improvement enthusiast.

Modern Kitchen Cabinet Handle

Kitchen

Nazca3D

A simple quick release universal wall mount. It can be screwed to the object and the wall. Square version that supports high loads, modified and strengthened at the critical stress points directly by bambustudio

Universal Wall Mount square

Parts

OlleMark

Updates:2023-10-27 - Added a 50mm and 25mm height variant of the large box&nbsp;Stackable hexagon storage boxes in multiple sizes.&nbsp;Printed with elegoo PLA in black, white and red on a BBL P1P and Flsun V400 with a standard 0.2mm layer height.&nbsp;I tried to make it use as little filament as possible but still be strong enough.More sizes can be added if needed :)&nbsp;Dimensions:Small 160*120*80mm / 160*120*120mmMedium 200*125*100mm / 200*125*150mmLarge 250*200*100mm / 250*200*150mm / 250*200*50mm / 250*200*25mm&nbsp;V2 is now available on my profile!

Hexagon Storage Boxes Stackable

Storage

zheng da qian

这是一款大疆action3.4兼容的收纳盒使用时需要带着原厂兔笼将其放入还可以放置一张tf卡，四个滤镜以及原厂充电管家采用卡扣收纳设计力度适中.我此次分享模型目的仅供个人使用不允许分享所以在模型上加入了一段文字This is a DJI action3.4 compatible storage box. When using it, you need to bring the original rabbit cage into it, and you can also put a tf card. The four filters and the original charging housekeeper adopt the buckle storage design with moderate strength. I share the model for personal use only, so I am not allowed to share it, so I added a paragraph to the model.

dji action Storage box 大疆action收纳盒

Camera stuff

Cyber

Moderne Vase im Spiral Design.&nbsp;Modern vase in spiral design.

Modern Vase Spiral Design

Nice vase

dubios

Use a layer height of 0.16 mm. Still fitting problems? → See &#34;Troubleshooting&#34; section below.&nbsp;A purge deflector on which you can slide different baskets to save space - this is the mini pms (purge management system) - print it on one plate without support, 0.16mm layer height in about an hour.&nbsp;Basket(s) locks into place when pushed in and you can reduce vibration sounds with the printable TPU mats, a piece of fabric or a piece of rubber (scroll down for more information).<h2>Standard mini pms</h2><ul><li>Upgradeable with different baskets (standard basket, deeper standard basket, XL basket, XXL basket, Monster basket, Thinner standard basket): <a target="_blank" href="https://makerworld.com/en/models/160727" rel="nofollow noopener">Baskets</a></li><li>If you know right away you don&#39;t want the standard basket use a “Standard purge deflector” and choose your basket (<a target="_blank" href="https://makerworld.com/en/models/160727" rel="nofollow noopener">baskets</a>).</li><li>Stronger basket lock version available, read “stronger basket lock” section in the “Troubleshooting” section below, before printing.</li><li>“Troubleshooting (versions) for the standard edition” available, section below.</li><li>Carefully selected and extensively tested dimensions: Walls are designed, that they are match the 0,16mmx2 Wall thickness with a small infill cap (1mm-4*0,16mm). This makes the basket slightly flexible, stable and lightweight. Also, the standard basket is intentionally close to the print bed so that the small strips that get caught on the nozzle also fall into the basket. The distance has been tested extensively (everyday day use, A1 mini) so that the basket does not come too close to the print bed and even if the basket bends slightly there is still enough clearance. </li></ul><h2><a target="_blank" href="https://makerworld.com/en/models/168981#profileId-185597" rel="nofollow noopener">Lightweight mini pms</a></h2><ul><li>Smaller and thinner than the &#34;Standard mini pms&#34; so it is printable in under an hour.</li><li>A little bit wobbly but still a full mini pms.</li><li>Stronger basket lock version available.</li><li>Link: <a target="_blank" href="https://makerworld.com/en/models/168981#profileId-185597" rel="nofollow noopener">https://makerworld.com/en/models/168981#profileId-185597</a></li></ul><h2><a target="_blank" href="https://makerworld.com/en/models/164085#profileId-180108" rel="nofollow noopener">Just a purge deflector with this design</a></h2><ul><li>Link: <a target="_blank" href="https://makerworld.com/en/models/164085#profileId-180108" rel="nofollow noopener">https://makerworld.com/en/models/164085#profileId-180108</a></li></ul><h2><a target="_blank" href="https://makerworld.com/en/models/375011#profileId-274943" rel="nofollow noopener">A basket that fits under the mini pms</a></h2><ul><li>Link: <a target="_blank" href="https://makerworld.com/en/models/375011#profileId-274943" rel="nofollow noopener">https://makerworld.com/en/models/375011#profileId-274943</a></li></ul><h2>How to print:</h2>If you are not printing this with a print profile: print without support, tolerances are designed for a layer height of 0.16mm and PLA, but other layer heights and filaments could also work.&nbsp;<h2>Vibration noise information</h2>You can use a printable TPU mat, a piece of rubber, folded paper or fabric to reduce vibration noise from the poop in the basket, I used some adhesive strips under the piece to attach it. When printing with specific sideways movements, a vibrating noise can occur when the poop lightly touches the side wall. This is least likely to happen with a rubber or TPU base, alternatively the wall can also be covered with the aforementioned pieces.<h3>How to print TPU mats and TPU inserts with walls:</h3><ul><li>You can use the provided print profile or edit your own</li><li>0.16mm layer hight than edit the strength section:<ul><li>6 Walls (you can play with that, one loop should be 0.16mm wide)</li><li>0 (zero) Top shell layers</li><li>6 bottom shell layers (you can play with that, one layer is 0.16mm high, so 6 layers are 0.96mm high)</li><li>Sparse infill density 10% Honeycomb (you can play with both settings, maybe 15% Gyroid with only 4 bottom shell layers is more silent)</li></ul></li></ul>&nbsp;<h2>Troubleshooting (versions) for the standard edition:</h2>Have you used a layer height other than 0.16 mm? Then this may be the reason, but you may be able to find a solution below without reprinting<h4>Sits your container too tight on the purge deflector or doesn&#39;t slide on?</h4><ul><li>Then you can simply grind the small bar on the purge deflector or, of course, print one of the following versions.</li></ul><figure class="image image-style-side"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000131754/design/2024-01-29_66cfe5a866825.jpeg"></figure><h4>Stronger basket lock standard purge deflector</h4><ul><li>Use this deflector version if the basket doesn&#39;t snaps into place with a light click.</li><li>I used it for PLA-Matte filament from eSun.</li></ul><h4>More tolerance standard purge deflector</h4><ul><li>Use this if a basket for the standard mini pms doesn&#39;t fit. This version has more tolerance at the slider (thinner and the lock bar is also thinner).</li><li>In all my tests, I did not have to use this version (I used BambuLab PLA, eSun PLA mat, generic PLA and PETG). So consider checking your layer height again (0.16 mm), try drying the filament and recalibrating your filament before using this version.</li></ul><h4>Thinner standard basket - for Standard mini pms</h4><ul><li>It can occur that the standard basket is too close to the print plate (A1 mini), mostly to a wrong layer height.</li><li>This version is slightly thinner to fix this problem if it is not the layer height.</li></ul><h4>Other problem? Just leave a comment so I can take a look at it.</h4>&nbsp;<blockquote>Looking for cool other things to print? Check out my Magic Bookshelf! <a target="_blank" href="https://makerworld.com/en/models/147616#profileId-161046" rel="nofollow noopener">https://makerworld.com/en/models/147616#profileId-161046</a></blockquote><blockquote>If you like my work, please feel free to support it with a small tip, I can never have enough filament and good coffee to help me with prototyping: <a target="_blank" href="https://www.buymeacoffee.com/dubios" rel="nofollow noopener">https://www.buymeacoffee.com/dubios</a> or <a target="_blank" href="https://ko-fi.com/dubios" rel="nofollow noopener">https://ko-fi.com/dubios</a></blockquote><blockquote>Check out my other models!: <a target="_blank" href="https://makerworld.com/en/u/2166054501" rel="nofollow noopener">https://makerworld.com/en/u/2166054501</a></blockquote><blockquote>Update 06.04.24<ul><li>added TPU inserts with walls</li></ul>Update 28.02.24<ul><li>added a step file for remixing the baskets (remixing means major changes, not just adding a logo, have fun!)</li></ul>Update 02.02.24<ul><li>The dubios lettering has been removed from the front and is now on the inside.</li></ul>Update (01.02.24)<ul><li>New design to meet the new community guidelines.</li><li>The chamfer at the bottom of the baskets has been removed to minimize rare print problems.</li><li>BIG BOY basket has been removed - use L or XL basket.</li><li>Minor fixes on the L (deeper standard) basket and XXL basket.</li><li>The lightweight edition has been updated with the new purge deflector design (still thinner) and the basket has been updated (like the thinner standard basket, but for the lightweight rinse deflector).</li><li>Added TPU mats for the Thinner standard basket and lightweight basket.</li></ul>Update (28.01.24)<ul><li>The purge deflector connection to the printer is now a lot more stable tahn the old version to work well with the new baskets.</li><li>Purge deflector design update (rounded corners) and little details.</li><li>New baskets versions for the standard pms available, for a better overview, these have been published as remixes.</li></ul>Update 27.01.2024:<ul><li>Vibration damping mats that you can print with TPU are now available for the standard basket and the BIGBOY basket (see instructions before printing).</li><li>All purge deflectors for Standard mini pms sitting now more stable on the purge wiper than the old version.</li><li>The BIG BOY basket is slightly smaller at the back, which has solved a problem when used on the A1 mini.</li><li>The stronger basket lock for special Filaments - purge deflector for Standard mini pms is now suitable for most PLA-Matte filaments without grinding.<ul><li>Very strong basket lock version which you can than customize by grinding has also been added</li></ul></li><li>A version of the purge deflector for Standard mini pms with greater tolerance is now available (try other versions first before printing)</li></ul>Update 26.01.2024:<ul><li>The baskets for the standard mini PMS (standard basket and BIG BOY basket) are now slightly larger on the right-hand side to catch more of the threads that sometimes fall off the right-hand side of the purge wiper.</li><li>The bevel under the BambuLab lettering has been modified to make it easier for the printer to produce a beautiful result.</li></ul>Update 18.01.2024:New stronger basket lock version of the Standard deflector added if problems with the basket lock occur (like when using PLA-Matte)&nbsp;Major Update 15.01.2024:<ul><li>The old mini-pms is now called Lightweight mini pms, the new one is called Standard mini pms or just mini pms</li><li>All mini pms editions:<ul><li>Fixed adapter (the oval to stuck the mini pms on the printer), see hot fix update 15.01.2024</li><li>The slider (holder) for the “baskets for mini pms” now click slightly in</li><li>Chamfer bottom edge instead of rounded for an smoother print</li></ul></li><li>Standard mini pms (new ones):<ul><li>Significantly more stable than the lightweigt edition thanks to the thicker &#34;purge reflector for standard mini pms&#34;.</li><li>The standard basket is now slightly larger, making it much easier to throw the test strips in and less of the purge shooter goes astray</li></ul></li><li>Standard mini pms BIG BOY:<ul><li>Thanks to the new design, it is now possible to attach a much larger basket without any losses, the mini BIG BOY (maybe in future comes also a deeper one)</li></ul></li></ul>Hot fix update 15.01.2024:<ul><li>purge deflector oval has been adapted, it now fits better on the printer</li><li>the slider (holder) for the “basket for mini pms” now clicks slightly in</li></ul></blockquote>

A1 poop bin A1mini bucket A1 mini basket mini pms

Bambu Lab A1 mini upgrades

nyx_nk

Banana case

Food things

Codyinbody3

As some of you may know I have a ton of honeycomb models printed and put up in my printing room so I thought I'd design a Honeycomb Wall Shelf to put some of my smaller models. These shelves are stackable and dont use a lot of material like the other Honeycomb Shelves I've found. It prints fairly quickly too. Enjoy!

Honeycomb Wall Shelf

Lego things

Dzaboka

A articulated model of Peppa Pig i made for my little niece :)&nbsp;I used Bambu Labs Pla Matte White, Sakura Pink, Dark Red and Pla Basic Dark.&nbsp;U can find her baby Brother George Pig to play along here: https://makerworld.com/en/models/425224#profileId-328766

Articulated Peppa Pig

Kids Things

Yakuza

Hello, I made this wall and part as alternative to hexagon system. I made some useful parts, but there are a lot of other on the way.<ul><li>drill holder</li><li>variable bigger tool holders</li></ul>and many other. If you need something specific, it is no problem to prepare, please send me a message&nbsp;&nbsp;<h2>11.3.2024 added these items:</h2><ul><li>Ratchet & Socket Sets - ¼" 3/8" ½" ratchet & socket holder</li><li>Caliper holder</li></ul>

Modular workshop tool wall - OCTAGON

Tools

Darren

AUTOTRAY LITE&nbsp;<figure class="table" style="width: 95.57%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_5b16cb3dce6a.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_63e85c7e5eb8b.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_8b4c3443c53cb.jpg"></figure></td></tr></tbody></table></figure><boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoyed this model and want to encourage me to come up with more original and innovative designs please consider boosting this model.  I mainly design more unique and complex models that take longer to print.  Due to print time they get downoloaded less frequently than quick to print models.  Boost are a way to compensatie for this and are always greatly appreciated.   Thank you</boostcontent></boostme>&nbsp;Design&nbsp;This is a more compact version of Autotray that can be printed on any printer with a 180 mm x 180 mm plate including the A1 mini, P1 and X1. The full sized Autotray is here: <a target="_blank" href="https://makerworld.com/en/models/425827?from=search#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827?from=search#profileId-329526</a><ul><li>It is quick to print. 8.5 hours for P1 and X1 and 11.5 for A1 mini</li><li>It has much fewer parts than the full sized Autotray</li><li>Is is quick and simple to assemble and disassemble with clips (see the Clip cards).</li><li>The angular position of the tray can easily be adjusted.</li><li>It folds easily for storage.</li><li>I have included print profiles for the X1 and the A1. The print files are in 3 parts. The main unit, the rear headrest brackets and the optional components.</li><li>Support is only required for the rear headrest brackets</li><li>The hinges for the steering wheel brackets and the rear headrest brackets are print in place.</li><li>The rear head rest bracket features a rotating cylinder to lock the bracket in place.</li><li>No external parts are required</li></ul>Options and features<h2 style="text-align: center">*** NEW OPTIONS FOR AUTOTRAY LITE ***</h2>Here are some new options for Autotray Lite.  Be sure to check back as I will be adding to these in the next while.&nbsp;<figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_54c652af38c7.png"></figure></td><td>Car basketball add-on A great way to relieve boredom when waiting in the car.  I enjoyed making and playing this game. You can get this add-on <a target="_blank" href="https://makerworld.com/en/models/461087#profileId-369765" rel="nofollow noopener">here</a>     </td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-11_5b00ce96e39de.png"></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_5f73650b40ee5.png"></a></figure></td><td>Autotray Laptop/tablet add-onThis is one of the new optional add-ons for Autotray to allow use of a laptop/tablet.  The trays replace the tablet holder and can be quickly and easily be added and removed.  Enjoy!  &nbsp;You can get this add-on by clicking <a target="_blank" href="https://makerworld.com/en/models/459198" rel="nofollow noopener">here</a>&nbsp;&nbsp;</td><td><figure class="image"><a href="https://makerworld.com/en/models/459198" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-09_e2f1cc338a717.png"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width: 93.76%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 97.33%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_e32eaf1e349e2.png"></figure></td><td>Chopstick holder add-on This add-on is for a chopstick holder.  I added print profiles for the A1 and the P1 and X1 as well as a STL file.</td><td><figure class="image image_resized" style="width: 93.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-10_456ee0b5f4d96.png"></figure></td></tr></tbody></table></figure>Autotray includes many options and features which can quicly and easily be attached to Autotray with clips:<ul><li>Phone mount brackets (back and bottom)</li><li>Nintento Switch mounting brackets</li><li>Fry holder</li><li>Ustensil holders</li><li>Tablet holder</li><li>Mouse pad</li></ul><figure class="table" style="width: 96.61%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_791d636e9d508.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_aa448f0f2541b.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-04-17_df39a6ff45d86.png"></figure></td></tr></tbody></table></figure>Autotray has mounts to enable adding other parts and features.  Assembly is quite simple. It is shown in the gif.&nbsp;Autotray full size&nbsp;Autotray is also available in a larger 3d model suitable for in car offices etc.  The link for the 3d model is : <a target="_blank" href="https://makerworld.com/en/models/425827#profileId-329526" rel="nofollow noopener">https://makerworld.com/en/models/425827#profileId-329526</a>&nbsp;I welcome any comments and suggestions about improving Autotray.&nbsp;My designs &nbsp;I enjoy creating 3d models that others can use and appreciate.  It is a very fun pastime.   I find it very rewarding to see my models downloaded and printed.  I put lots of thought, time and effort to create each model print out multiple iterations to make sure it works just right. &nbsp;If you liked my model and wish to encourage me please give it a like or a boost. If you wish you can also help me with my <a target="_blank" href="https://ko-fi.com/darren3dmodels" rel="nofollow noopener">filament costs</a>.  Thank you.&nbsp;My Models&nbsp;If you are interested, here are some of my creations. You can also see all my models on my <a target="_blank" href="https://makerworld.com/en/@user_1543154938" rel="nofollow noopener">profile</a>.&nbsp;<figure class="table"><table style="border: 1px double rgb(179, 179, 179)"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/425827?from=search#profileId-337902" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_8cb4bfc480828.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/425827#profileId-337902" rel="nofollow noopener">Autotray</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/439932#profileId-345597" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_80f1fc53f1258.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/439932#profileId-345597" rel="nofollow noopener">Versa Mount</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/447157#profileId-353793" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_252dfd34be1da.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Table saw</a><a target="_blank" href="https://makerworld.com/en/models/447157#profileId-353793" rel="nofollow noopener">Outfeed </a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/440873#profileId-346595" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_c0c403ecc4bc.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/440873#profileId-346595" rel="nofollow noopener">Treat helper</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/457210#profileId-365192" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_7677874c7a172.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/457210#profileId-365192" rel="nofollow noopener">Ipad tablet stand</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><a href="https://makerworld.com/en/models/432891#profileId-337490" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000432891/design/2024-05-05_f02e210418cb4.png"></a></figure><a target="_blank" href="https://makerworld.com/en/models/432891#profileId-337490" rel="nofollow noopener">Autotray Lite</a></td></tr></tbody></table></figure>&nbsp;&nbsp;

Autotray Lite - A1, P1 and X1 compatible

Car Things

ArgiCZ

Holder for 9x9 cm paper note blocks with pen compartment.&nbsp;Nice honeycomb design.&nbsp;You can choose without pen compartment <a target="_blank" href="https://makerworld.com/en/models/104692#profileId-161098" rel="nofollow noopener">here</a>.

note block stand with pen compartment - honeycomb design

Desk Things

Ziemniaczany

Nice and easy to use container with twist lock.&nbsp;New version of container is out.https://makerworld.com/en/models/471636#profileId-381290

Container with Twist Lock / No supports 

Nice Things

Vixvvo 3D

Patreon commercial licenses will be accessible through my Patreon page, 'Vixvvo3D', at the affordable rate of $6 per month. I aim to consistently post and model new content on a weekly basis. Your support on <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a> is greatly appreciated! (edited)&nbsp;&nbsp;Keychain Display Carousel&nbsp;I created this rotating keychain display. It's sturdy and requires no glue or additional support. If you prefer a taller display, just extend the middle rod or you can request it, i will be happy to make you a different sized extension. It rotates smoothly and remains stable without tipping over. You can stack layers as high as you want and adjust the rod height accordingly!&nbsp;<ul><li>Plate 1 - Screw Cover, Keychain Hook, Long Extension, Divider</li><li>Plate 2 - Top Octagon</li><li>Plate 3 - Carousel Stand</li></ul>&nbsp;&nbsp;