3D_Laser_Design

Verounsen

Dear middle school teachers This is a puzzle to learn the cantons of Switzerland or to see who can do it the fastest. I have simplified some of the cantons. There is an expert version without the canton abbreviations, if anyone would like that, please let me know and I'll add it. Have fun! :)&nbsp;---&nbsp;Sehr geehrte Mittelstufenlehrpersonen Dies ist ein Puzzle, um die Kantone der Schweiz zu lernen oder als Wettbewerb, wer es am schnellsten legen kann. Einige Kantone habe ich etwas vereinfacht. Es gibt eine Expertenversion ohne die Kantonskürzel, falls die jemand möchte, bitte melden, dann reiche ich sie nach. Viel Spass! :)

Swiss Cantons Puzzle (26 Pieces)

Educational

ThreeD-Michael

<figure class="table" style="width:50%;"><table><tbody><tr><td>News 2024-04-10:Please also check out my new <a target="_blank" href="https://makerworld.com/en/models/422861" rel="nofollow noopener">Blade Dispenser</a> for this Bed Scraper:<figure class="image"><a href="https://makerworld.com/en/models/422861" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/843986/2024-04-10_3fff13c94089c.png"></a></figure></td></tr></tbody></table></figure>This is the XL version of my popular <a target="_blank" href="https://makerworld.com/en/models/231936" rel="nofollow noopener">Optimized Bed Scraper</a> with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer!&nbsp;Each blade weighs just 1.8 grams - and since each blade has two cutting edges, only 0.9 grams of filament is required per cutting edge. It couldn&#39;t be more economical, and you can now replace the blades more often without feeling guilty.&nbsp;Print Settings:This design has been optimized for printing with a layer height of 0.2 mm, so please do not use a different value. The first layer should have a line width of at least 0.5 mm. In order to get the sharpest possible blade, you should choose a smooth printing surface if possible.The locking mechanism has been optimized for PLA, so I recommend this filament for the handle. You can also print the blades with PLA - as long as you don&#39;t scratch on a bed that&#39;s too hot for PLA. In this case, I would recommend a more heat-resistant filament, for example PETG.&nbsp;Assembly:That is very easy. Simply slide the blade into the handle. But be careful - the blades are sharp, so don&#39;t push them in with your finger, but insert them loosely and then push them all the way by pressing the blade on a solid surface.

Optimized Bed Scraper XL

Bed Scrapper

Pathfinder.Ant

Electric Water Gun Toy - UZI：1.材料：pla，petg，abs均可/Materials: pla, petg, abs all available；2.打印机尺寸：220mmx220mm以上的平台/Printer size: Platform size 220mmx220mm or above；3.颜色：效果图及实物图采用黑色与卡其色/Color: Black and khaki colors are used in the renderings and actual images；4.射程：7-8m；/Range: 7-8m；5.电控清单：波箱采用恒力冠玩具配件厂的SQ-03,击发开关采用同一家的防水开关，电池为3.7v14500电池一节，电池盒为14500或者5号电池盒即可，连接线若干。后续拓竹官方上线配件，将第一时间添加相关配件。/Electrical control list: The wave box adopts SQ-03 from Hengli Crown Toy Accessories Factory, and the ignition switch adopts the same waterproof switch. The battery is a 3.7v14500 battery, and the battery box can be a 14500 or No. 5 battery box, with several connecting wires. Subsequently, Tuozhu will officially launch accessories and add relevant accessories as soon as possible.&nbsp;

Electric  Water Gun  Toy - UZI（3.7v）

Spielzeug

Collecticraft

<h2>Insight Unveiled: The Divine and the Mortal</h2>Step into the realm where divine wisdom meets mortal curiosity with &#34;Insight Unveiled.&#34; This extraordinary project brings together the majesty of Zeus, king of the gods, with the enigmatic allure of the human skull.<h3>Key Features:</h3><ol><li>The Divine Visage: The bust of Zeus, crafted with meticulous attention to detail, exudes the power and authority befitting the ruler of Mount Olympus.</li><li>Mortal Remnants: Nestled within the bust lies a human skull, a poignant reminder of the fleeting nature of mortal existence and the eternal wisdom sought by humanity.</li><li>Symbolic Union: The juxtaposition of Zeus&#39;s divine countenance with the mortal skull creates a compelling visual narrative, inviting contemplation on the intersection of the divine and the mortal realms.</li></ol>Project Objectives:<ul><li>Explore themes of mortality, divinity, and the pursuit of knowledge.</li><li>Challenge conventional notions of power and authority by blending the divine with the mortal.</li><li>Spark introspection and philosophical inquiry into the nature of existence and the mysteries of the cosmos.</li></ul>Commercial License: <a target="_blank" href="https://www.patreon.com/CollectiCraft" rel="nofollow noopener">Patrons</a> gain exclusive commercial rights to utilize and distribute this unique fusion of divine and mortal symbolism

Insight Unveiled: The Divine and the Mortal

Kunst

Allar3D

A simple universal quick release wall mount. Can be screwed to the item and wall, or just use double sided tape.&nbsp;Download the Medium-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/459408#profileId-367627" rel="nofollow noopener">Universal Wall Mount - Medium-Duty</a>Download the Light-Duty model from here: <a target="_blank" href="https://makerworld.com/en/models/464549#profileId-373195" rel="nofollow noopener">Universal Wall Mount - Light-Duty</a>

Universal Wall Mount - Heavy-Duty

usefull

nozzle wiper

The_Trap__

Kalibrierungs würfel 20 x 20 mm mit angeschrägten Kanten um evtl. vorhandenen Elefantenfuß zu kompensieren. Calibration cube of 20 x 20 mm with chamfered edges to compensate for any possible elephant's foot.

Calibration Cube 20x20

Callibration

Willi 3D

&nbsp;Create your BaBo organizer! A system created to store them all!&nbsp;Description:This is the BaBo duo riser modul. This riser can be mounted under the <a target="_blank" href="https://makerworld.com/de/models/16350#profileId-15235" rel="nofollow noopener">BaBo duo modules</a> to allow better visibility and the top glass can be stored while printing PLA. It also offers an adapter for the <a target="_blank" href="https://eu.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">LED Lamp Kit 001</a> to improve the lighting when working, there is also the option of installing LED strips up to a width of 12mm if you prefer them. Also a <a target="_blank" href="https://makerworld.com/de/models/93943" rel="nofollow noopener">spool holder</a> is available for the honeycomb version.&nbsp;Please do not use the LED lamps during the lidar calibration process, it may distort the results.&nbsp;It is only compatible with the [BaBo duo] modules and not with the [BaBo] modules, but you can use all the [BaBo] inserts.&nbsp;Thanks to Mr.Quen for allowing me to use his pictures.&nbsp;<figure class="image image_resized" style="width: 59.44%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051390/design/2024-04-19_8f6ac7e238f99.jpg"></figure>BaBo organizer is a stationary, very flexible system to store your tools, spare parts and even printing plates. The design is based on the iconic look of the Bambu Lab X1 printer. The entire system uses only 1 type of screw, M3x8 countersunk screws.&nbsp;Links:<ul><li><a target="_blank" href="https://makerworld.com/de/u/24485025/collections/12914" rel="nofollow noopener">BaBo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666853" rel="nofollow noopener">BaBo duo collection</a></li><li><a target="_blank" href="https://makerworld.com/en/u/24485025/collections/666866" rel="nofollow noopener">BaBo inserts</a></li><li><a target="_blank" href="https://www.printables.com/@Willi/store" rel="nofollow noopener">Exclusive models, printables. (Credit card)</a></li><li><a target="_blank" href="https://than.gs/u/1578655?plans=true" rel="nofollow noopener">Exclusive models, thangs. (Paypal, Credit card)</a></li></ul>Update:(31/10/23)<ul><li>improved connection between modules</li><li>print profile optimizations</li></ul>(07/11/23)<ul><li>added two TPU lips to prevent the glass from slipping out</li></ul>(17/11/23)<ul><li>bottom gasket option and Honeycomb version added</li></ul>(24/11/23)<ul><li>LED adapter for <a target="_blank" href="https://eu.store.bambulab.com/products/led-lamp-kit-001" rel="nofollow noopener">LED Lamp Kit 001</a> added</li></ul>(15/12/23)<ul><li>added LED stripes guides (In the &#34;Raw Model Files&#34; you can find a model that you can stick to your riser if you haven&#39;t printed the current version.)</li><li>removed bottom gasket</li></ul>Printing:Layer height: 0.2Supports: YesBrim: NoMaterial: all&nbsp;Assembly:Follow the instructions in the picture.<ul><li>printed parts</li><li>4 x M3x8 countersunk screws</li><li>optionally, a second set of seals can be mounted below</li></ul>If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work buy me a coffee (PayPal).</a> Thanks!&nbsp;Clubcontent:<figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051390/design/2024-06-13_f909dc1ad34ca8.jpg"></a></figure><figure class="image"><a href="https://www.printables.com/@Willi/store" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000051390/design/2024-06-13_9be72c33e8fd9.jpg"></a></figure>

[BaBo duo] AMS riser module

BaBo Modules

Engineering Projects

PLEASE READ THE INFORMATIONS, DO NOT QUICK DOWNLOAD AND PRINT IGNORING THE TIME I DEDICATED TO WRITE THEM!------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------&nbsp;Notice:Since I have respect for other designers&#39; designs I sent a private message to ask if I could post a remix and didn&#39;t hear back after several days.This remix is specifically for those who want the RISER in ABS.____________________________________________________________________________________________________________________________________________________<h2>DESCRIPTION:</h2>Since I print with high temperature materials, it is absolutely NOT RECOMMENDED to use PLA!&nbsp;Especially if you change the plates after printing ABS, PC , PAHT, PA6 ,…. , which have a different temperature resistance.&nbsp;For example, you finished to print a something in ABS, you remove the hot 90°C plate from the printer and you put back in YOUR 3D PRINTED PLA riser.Guess what can it happen? It melts! Because PLA Vicar Softening Temperature is only 57°C!<img class="image_resized" style="width: 64.62%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-10_7f5f01f25a2498.png">&nbsp;COMPARED TO THE VICAR SOFTENING TEMPERATURE OF ABS:<img class="image_resized" style="width: 67.33%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-10_646ab56ac6a668.png">&nbsp;That&#39;s why I warn you about the risk of printing the riser in PLA!  It was a BIG project that took me a lot of time and changes due to the type of filament and it is known that ABS does not have dimensional stability, but rather tends to shrink by almost 0.30mm for each print.&nbsp;&nbsp;This project was finished on the 30th December 2023 and I tested for 6 months! No issues!&nbsp;&nbsp;MY SECRET TO AVOID WARPING IS THIS NUMBER : 97°C FOR THE BED AND APPLY LIQUID GLUE OR NORMAL GLUE! THIS IS THE WAY I ALWAYS HAVE STRAIGHT PRINTS FOREVER! Just adding +7°C for the bed makes the difference! YOU HAVE ALREADY MY PROFILE SET UP WITH THAT NUMBER!Obviously the temperature may vary depending on the climate you live in!<h2>FILAMENTS:</h2>BAMBU LAB ABS (BLACK , GREEN , ORANGE &amp; SILVER) FOR ALL THE RISER PARTS AND BAMBU LAB TPU95-HF ONLY FOR THE GASKETS.Since the filaments are printed at different settings and temperatures, they cannot be in a single file, unfortunately! I&#39;ve already tried and it gives me an error, I&#39;ll tell you so you can save time!<img class="image_resized" style="width: 61.48%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_1afe2f7bdc7c88.jpg">&nbsp;<h2>CHANGES:</h2>&nbsp;<ul><li>CUSTOM DASH</li></ul><img class="image_resized" style="width: 56.89%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_eca946be9e631.jpg">&nbsp;<ul><li>CUSTOM BUTTONS IN 2 COLORS</li></ul>&nbsp;<img class="image_resized" style="width: 56.86%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_96a5980970217.jpg"><ul><li>NICE GAP BETWEEN THE TOP GLASS AND THE DASH, SO THE TOP GLAS LAYS PERFECTLY ON IT WITHOUT PROTRUDING</li></ul><img class="image_resized" style="width: 63.58%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_1c8ee98f53ff58.jpg"><ul><li>CUSTOM DRAWERS</li></ul><img class="image_resized" style="width: 60.14%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_1a9a646ccf676.jpg"><ul><li>TEXTURED SURFACE FOR THE DRAWERS</li></ul><img class="image_resized" style="width: 75.75%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_11d9260027ade8.jpg"><ul><li>DRAWERS EASY TO PRINT</li></ul><img class="image_resized" style="width: 59.11%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_303bb8fa66b288.jpg"><ul><li>TEXTURED SURFACE FOR THE FRONT PARTS OF THE RISER NAMED AS 1 &amp; 2 IN THE FILE</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_53dd9c358fb298.jpg"><ul><li>EASY MULTI-COLOR PRINT FOR THE FRONT PARTS OF THE RISER NAMED AS 1 &amp; 2 IN THE FILE , SO BLACK AND SILVER ABS AT LAYER 0.01mm</li></ul><img class="image_resized" style="width: 60.98%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_6786cf89d7fe7.jpg"><ul><li>CARBON FIBER TEXTURE ON THE GASKETS</li></ul><img class="image_resized" style="width: 71.67%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_8c398dc492fcf8.jpg"><ul><li>RESISTANT TO HIGHER TEMPERATURES AND LOADS</li></ul><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_baa3a2035ce5b.jpg"><ul><li>PERFECT HEIGHT FOR THE BUTTONS AND ALIGNED TO THE DASH</li></ul><img class="image_resized" style="width: 63.56%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_b2605e346754a8.jpg">&nbsp;&nbsp;<h2>TOOLS:</h2>TWEEZERS, x4 M3 SCREWS 2 FOR EACH DRAWERS AND POSSIBLY SANDPAPER TO SMOOTH THE SUPPORTS, BUT IT IS AN EXTRA!&nbsp;<h2>EXTRAS:</h2>POWER BANK AND USB LED CONTROLLER EASY TO FIND ON ALIEXPRESS OR AMAZON TO TURN ON &amp; OFF THE LED OR TO CHANGE THE COLOR. YOU NEED TO STRIP THE LED WIRED AND CONNECT TO THE CONTROLLERS PINS.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_82bbaff0d601.png"></figure>THIS IS THE EASIEST WAY TO TURN ON AND OFF THE LED WITHOUT USING EXTRA ELECTRONICS LIKE ARDUINO OR ESP32:&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_623ddf5dc8ed4.gif">&nbsp;LIGHT SET UP:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_bfd9cdbe23cdf8.gif">&nbsp;<h2> </h2><h2>HOW TO ASSEMBLE TO RISER:</h2>1 CONNECT THE INSERTS TO THE RISER AND TO THE DASH<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_bd31adf091d4b.gif">&nbsp;&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_3015b3a3d85a9.gif">&nbsp;2 INSERT THE BUTTONS AND LAY THE GASKETS IN POSITION<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482604/design/2024-06-02_6d4e8885e2d87.gif">&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h2>NOTICE:  </h2>I don&#39;t provide back grills for the part 3 &amp; 4. Furthermore maybe you will find some side grills too loose and some others too tight._________________________________________________________________________________________________________________________________________  &nbsp;Remember this profile works only for ABS, in case you have tolerances problems , play adding +0.30mm or -0.30mm to the part. But as good I saw , each model doesn&#39;t need changes.&nbsp;_____________________________________________________________________________________________&nbsp;<h2>NOTICE: DO NOT POST ANY OF YOUR PROFILE</h2>_____________________________________________________________________________________________&nbsp;&nbsp;&nbsp;Give me a like and follow my page.If you need help, just send me a message.&nbsp;&nbsp;<h2>Happy printing.</h2>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<h2> </h2>&nbsp;&nbsp;&nbsp;

X1C FULL ABS RISER

Ams Riser

DrJones

While playing with gear designs I came up with this idea, and I found it interesting enough to share. The gears can move side to side, but they don&#39;t fall out.After printing the 60mm version I also uploaded two longer ones (80mm and 100mm rail length).&nbsp;If you like interesting uncommon gear fidget things, try the <a target="_blank" href="https://makerworld.com/en/models/484859" rel="nofollow noopener">&#34;binary sun gear&#34;</a>.

gear rail fidget toy

Fidget Toys

mcmaven

This is a 3D-printed model of a triple-axis tourbillon, which is based on the tourbillon in a Jacob and Co. Twin Turbo Furious watch. A tourbillon is a mechanism employed to counteract the effects of gravity within a watch. This intricate model includes an escape wheel, triple-axis outer frame, and a base with an integrated motor. It functions on the same fundamental principles as a traditional watch tourbillon.&nbsp;With precise assembly and calibration of the escape wheel, spring, and base drive gear, this tourbillon can smoothly rotate in three axes and maintain accurate timekeeping. The provided print settings in the Triple-axis Tourbillon Model for Kit-007.3mf file are already customized to ensure that all screw holes are clear and ready for assembly.&nbsp;Printed plastic ‘screws’ are printed to scale and used as caps to cover the steel screws that actually hold it together.<a target="_blank" href="https://youtu.be/2-7S2i6AUyM" rel="nofollow noopener">Here </a>is a real-time video of the tourbillion in action.&nbsp;Note: There are two different designs defined for the Tourbillon: the 3MF version and the STL version.&nbsp;The 3MF (Triple-axis Tourbillon Model for Kit-007.3mf file) version was designed specifically to work with Bambu printers and the Bambu slicer, and uses the Triple-axis Tourbillon Model Hardware Kit motor to drive it. It is a slightly modified version of the original STL tourbillon version. To build the 3MF version you only need to order the <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a>, which provides all the non-printed parts (screws, bearings, shafts cut to length, motor, etc.) needed to build a complete model. <a target="_blank" href="https://www.youtube.com/watch?v=HRNbihDXNwE" rel="nofollow noopener">Here </a>is a video of assembling the 3MF version with the Bambu 007 hardware kit. Note that some of the sections in the Furious Build Notes PDF file below also apply to assembling the 3MF version, with the primary difference being the construction and components of the Base and the drive mechanism.&nbsp;The STL (Raw Model Files) version is a set od files that was designed to work with any printer or slicer. It also uses a more complex Arduino controlled stepper motor mechanism to drive it. To build the STL version you can order a kit of all the non-printed parts <a target="_blank" href="https://www.makerrx.com/collections/projectkits/products/twin-turbo-furious-tourbillon-kit" rel="nofollow noopener">here</a>, otherwise you will need to order the parts listed in the Furious Build Notes PDF instructions individually. If you order the STL version of the hardware kit or buy the parts yourself, you will need to program the firmware into the Arduino before it will work. The Furious Build Notes PDF file below, describes the assembly process for the STL version. For some of the larger parts, ‘full’ (e.g., Base Outer Ring.STL) and ‘split’ versions (Base Outer Ring a.STL and Base Outer Ring b.STL) of the same part are included. The ‘full’ parts require at least a 220x220 bed for printing. The ‘split’ parts may be printed separately on a diagonal on a smaller bed, then glued together to form the larger part.&nbsp;The following filaments can be used to create a model that looks like the pictured gold, silver, copper and black version:<ul><li><a target="_blank" href="https://shrsl.com/4cim5" rel="nofollow noopener">PLA Silk Gold</a></li><li><a target="_blank" href="https://shrsl.com/4cim4" rel="nofollow noopener">PLA Silk Silver</a></li><li><a target="_blank" href="https://shrsl.com/4cim3" rel="nofollow noopener">PLA Silk Copper</a></li><li><a target="_blank" href="https://shrsl.com/4cim2" rel="nofollow noopener">PLA Basic Black</a></li></ul>Here is a video of the construction of the 007 kit. And some sections in the Furious Build Notes.PDF file may be useful for constructing the 007 kit.<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=bHEU9rnnu88"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bHEU9rnnu88" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Disclaimer: This model is part of the Creator Program, When you purchase the Triple-axis Tourbillon Model Components Kit through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to public.)&nbsp;The Hardware Kit for the Triple-axis Tourbillon Model for Kit-007.3mf file can be found here: <a target="_blank" href="https://shrsl.com/4d484" rel="nofollow noopener">Triple-axis Tourbillon Model Hardware Kit</a><a target="_blank" href="https://shrsl.com/4cfzj" rel="nofollow noopener">.</a>

TT Furious Tourbillon

Bambu Maker Kits

IIKS

Super Secure Filament Clip for Bambu Lab Spools&nbsp;Features:<ul><li>Protrusion Clips onto spool rail in order to secure clip.</li><li>Clip designed to hold filament with perfect force in order to prevent damage.</li><li>Prints well without supports.</li><li>Quick print time (5 min) → 10min total including setup.</li></ul>Install:&nbsp;Install clip at an angle (pointed towards spool) in order to properly clip on protrusion.  NOTE: The depending on your spool, printer, filament and environment, the clips may be too stiff or too loose. <ul><li>For stiff prints, lower the number of walls and infill. </li><li>For loose prints, increase the number of walls and infill. </li><li>If the filament is too difficult to insert, scale the part down in the z-axis.</li></ul>