Die 3D Stube Minden

Mr.Jay

Collection of 6 coasters. Easy print, about 1 hour per coaster.Version without 2024: <a target="_blank" href="https://makerworld.com/en/models/86006#profileId-91912" rel="nofollow noopener">https://makerworld.com/en/models/86006#profileId-91912</a>

Happy New Year! Coasters Collection New Years Eve Party multicolor 

3D Stube Minden (2024 Makes)

V2<ul><li>added “0.8” cap</li><li>improved print profiles</li><li>changed the bottom of the cap (no hollowing, more stable, easier to fit)</li><li>added different color profiles</li></ul>V1 3x Caps (0,2/0,4/0,6mm) to visualise the current used hotend (Dont forget which hotend you put it… there might be people, that can simply remember… I cant ! ^^ )

Extruder visualiser for Bambu Lab A1 series (0,2/0,4/0,6/0,8 mm nozzle) *NEW V2 version*

Designs (3D Stube Minden)

tellus1019

Having trouble with dark lighting 3D printers? This LED Riser will solve all your problems!&nbsp;<ul><li>Easy printing</li><li>Easy assembly</li><li>No screws/glue required</li><li>Tilted LED lighting in the chamber</li><li>Interlocked with ON/OFF control</li></ul>&nbsp;It is adjusted to print at the perfect size. If shrinkage occurs, e.g. with ABS filament, it may make it difficult to close the glass top panel. If this is the case, adjust the print size according to the shrinkage.&nbsp;&nbsp;Caution Do not use PLA if you require higher bed temperatures. If you use a bed temperature above 70 degrees Celsius, print with ABS or PETG.&nbsp;&nbsp;What you Need Prepare the LED light ribbons sold by Aliexpress.With this LED tape from Aliexpress, you can choose between X1C and P1S/P1P. <a target="_blank" href="https://aliexpress.com/item/1005005952550058.html" rel="nofollow noopener">https://aliexpress.com/item/1005005952550058.html</a>&nbsp;&nbsp;Assembly Instructions1. Print out all parts Print all parts included in the profile. There are 4 risers and 8 clasps.&nbsp;2. Insert the LED power cable Pass the LED power cable through the front left part. There is a hole in the corner to take out the cable.Take out the cable from there.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/397274/2023-12-03_c4cab4720153c.jpeg">　<img src="https://makerworld.bblmw.com/makerworld/draft/397274/2023-12-03_006467bd8cdce8.jpeg"> 3. Insert LEDs into all parts Insert LEDs through all parts. Insert the LEDs from the edge of the parts and push them in. The load will increase when you turn a corner, but this is not a problem if you push the LED in little by little.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/397274/2023-12-03_b8d16bb2d8de3.jpeg">&nbsp;4. Fasten the parts with clasps. Fasten the parts with clamps at the front, back, left, and right, for a total of 8 locations. Push the clasps into position. It is easier to fix the lower part first, then the upper part.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/397274/2023-12-03_8755c1e4ca1db.jpeg">&nbsp;5. replace existing LED power cable with new cable After the LED Riser is completed, plug in the power cable.First, turn off the printer. Locate the LED connector from the power supply area at the top inside the 3D printer. Disconnect the existing LED connector and connect the new LED power supply.&nbsp;Check the wiki for details. Connector location differs between X1C and P1S/P1P.&nbsp;X1C <a target="_blank" href="https://wiki.bambulab.com/en/x1/maintenance/replace-the-chamber-led" rel="nofollow noopener">https://wiki.bambulab.com/en/x1/maintenance/replace-the-chamber-led</a>P1S/P1P<a target="_blank" href="https://wiki.bambulab.com/en/p1/troubleshooting/p1p-led-failture" rel="nofollow noopener">https://wiki.bambulab.com/en/p1/troubleshooting/p1p-led-failture</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/397274/2023-12-03_d34840bcf9cfa8.jpeg">&nbsp;6. Check the LED operation Turn on the printer. Change the LED lighting setting and check if the LED lights up. If there is no problem, the LED should light up in conjunction with ON/OFF.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/397274/2023-12-03_779a84dacb5a1.jpeg">

X1C/P1S/P1P Best LED Riser - Perfect size / No screws / No glue

Mods (X1C, P1S, AMS)

OLLESTORE

Storage box for A1 Mini. Designed to be placed under the heat bed next to the A1 chassis. Styled following the A1 mini design language. &nbsp;The staight side is not upright but hugs the slight slope of the chassis. The curved side should be facing outward.

A1 Mini Under Heat Bed Storage Box - with logo

Mods (A1 / A1 Mini, AMS Lite)

MakerWorld

This is a well-designed 4-color Lichtenstein Castle model with rich details on exteriors. It can be 3D printed in multiple colors with Bambu Lab AMS.&nbsp;Recommended filaments:Bambu PLA-CF Burgundy Red(14200)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231516275" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231516275</a>Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-cf?variant=40828231581811</a>Bambu PLA Basic Gray(10103)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-basic-filament?variant=40909352960115" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-basic-filament?variant=40909352960115</a>Bambu PLA Matte Dark Blue(11602)<a target="_blank" href="https://store.bambulab.com/collections/pla-1/products/pla-matte-filament?variant=40789984968819" rel="nofollow noopener">https://store.bambulab.com/collections/pla-1/products/pla-matte-filament?variant=40789984968819</a>Hotend: 0.4mm Hardened SteelPrint time: 24.3h

3D Stube Minden (2024 Makes)

Designs (3D Stube Minden)

Mods (X1C, P1S, AMS)

Mods (A1 / A1 Mini, AMS Lite)

3D Stube Minden (2023 Makes)