3DPrintingLabs13

lucamoretti86

ModelDo NOT adjust the size in your slicer!! The layers will not come out right. Do not change the size, this will cause errors in color change compromising the entire print. Use my print profile or you will not get the desired results. It can be printed safely without AMS and on any printer. I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you!&nbsp;Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Jade White At layer #16 (1.36mm) swap to Charcoal At layer #18 (1.52mm) swap to Gray At layer #20 (1.68mm) swap to Sakura Pink At layer #26 (2.16mm) swap to Jade White for the rest.

mickey mouse easter - HueForge

Easter 

svest1466

Hello there! Here is a Jack Skellington/Mickey Mouse Lightbox, face down and the back plate just slides on the back! Can hang on wall or stand up. Flow rate set to 1.04 for cracks and disabled prime tower due to size of the model Here is the link to the LED strips i used. <a target="_blank" href="https://www.amazon.com/gp/product/B0BG885LVL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.com/gp/product/B0BG885LVL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a> Let me know how it is!

Jack Skellington/ Mickey Mouse lightbox

halloween

Gunslinger_208

These decorative butterflies are easy to print and can be shaped using some hot water if printed in PLA. The first layer is only 0.2mm thick so should be semi-translucent depending on the filament colour used.Please post pictures if you make these. I'd love to see them in more colours.

Butterflies

misc

3DPmom

This is a fun fidget that fits nicely in your hand or perfect for playing with in your pocket.&nbsp;3D PRINTING SETTINGSLayer Height 0.2mmPLA works great15-20% Infill Dimensions of Mouse Layered Fidget: 2 1/2in x 2 1/4in x 7/8in You could scale up on this but I would caution about scaling down too much because that will thin the walls and tighten the spaces between the layers resulting in a less satisfying fidget.

Mickey Mouse Layered Fidget

aden

3DUP Varese

ITALIANO&nbsp;Questo stand per cellulare l'ho pensato perchè non mi piaceva vedere quel foro sulla bambulab P1S  e dato il fatto che tutte le volte mi trovavo a lanciare la stampa dal cellulare per poi appoggiarlo sul tavolo  mi sono deciso a realizzare uno stand apposito.L'ho realizzato seguendo la linea della stampante in modo che non mi dia fastidio con movimenti accidentali con le mani e poi anche per l'estetica, il montaggio è semplicissimo, va inserito nel foro fino in fondo e poi va applicata la clip che serve per non far uscire lo stand quando si inserisce il cellulare.La difficoltà maggiore sta nell'inserire la clip, sopratutto per chi ha mani grandi come le mie ma se cè l'ho fatta io, ci può riuscire chiunque.La larghezza della fessura dove inserire il cellulare è di 12 mm&nbsp;ENGLISH&nbsp;I thought of this cell phone stand because I didn't like seeing that hole on the P1S bamboo and given the fact that every time I found myself launching the printout from my cell phone and then placing it on the table I decided to create a special stand.I made it following the line of the printer so that it doesn't bother me with accidental movements with the hands and then also for aesthetics, assembly is very simple, it must be inserted into the hole all the way and then the clip must be applied which is used to prevent the stand from coming out when inserting the mobile phone.The biggest difficulty is inserting the clip, especially for those with hands as big as mine but if I did it, anyone can do it.The width of the slot where to insert the mobile phone is 12 mm

PORTA CELLULARE PER BAMBULAB

printer needs

dantman88

Nintendo Switch joycon adaptor to hold your favorite beer!

Beerio Kart

scott

Meng Prints

Cover for front housing for P1/X1printed one color - a black centre is hard to see

Batbu Labs - "Bambu Face" as Batman Logo

Lauren wants

shamrockwood315

3 Leaf clover or shamrock. This is easy and quick to print&nbsp;For your personal use only

Shamrock - 3 Leaf clover - 2024 Good luck Charm

st. patrick

A-Gang 3D Adventures

Print face down using lightbox settings.&nbsp;.2 Layer heightArachne Walls0 walls transitioning filter marginavoid crossing walls&nbsp;Top surface pattern - Hilbert Curve