3DIDOL

amulej

For those delicious little blobs that come out of your printer! Compatible with AMS lite top mount support brackets&nbsp;Make sure you select the appropriate print profile, or find the model you want in the “Download STL” section<ul><li>v1 will extend to the AMS support bracket</li><li>v2 will center the wall to the poop launcher and is available as 4 different options<ul><li>normal - 2mm walls (5.5h print time and uses 205g of filament)</li><li>normal with 10x5 mm magnets</li><li>slim -1.2mm walls (4.2h print time and uses 130g of filament)</li><li>slim with 10x5 mm magnets</li></ul></li></ul>&nbsp;v2 - all 4 options (normal, normal+mag, slim, slim+mag) print profile has all 4 options on different print plates so you can choose which one you want<img class="image_resized" style="width: 57.77%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000102763/design/2024-06-15_021b79093c0e1.png">&nbsp;Magnet snap in action<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000102763/design/2023-12-27_50f9bee64a246.gif">&nbsp;&nbsp;If you have a different dimension of magnets, let me know and I&#39;ll add the designCustom magnet sizes available in the &#34;Download STL” section<ul><li>6x2 mm v1</li><li>12x3 mm v2 slim</li><li>8x4 mm v2 slim and normal</li><li>8x2 mm v2 slim and normal</li></ul>

A1 poop bin with magnets

A1 Accessories 

Snugg-Arrific

Replica of Tom Cruises's blaster from the movie Oblivion. Just make the decals and/or paint. Enjoy

Oblivion Blaster (Tom Cruise)

Props

OdinStampe3D

This Dry box spool holder is designed to specificallyfit this cheap cereal box and Hygrometer you can buy on Amazon:Cereal box: <a target="_blank" href="https://www.amazon.it/gp/product/B08JTH2NZJ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B08JTH2NZJ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1</a>Hygrometer: <a target="_blank" href="https://www.amazon.it/gp/product/B09WGLXRM5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B09WGLXRM5/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>I use them to store filament in a dry environment, by placing the following silica beads inside the tank:Silica: <a target="_blank" href="https://www.amazon.it/gp/product/B07VG9W5JX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.it/gp/product/B07VG9W5JX/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a>

Cereal box - Dry box - Spool and Dessiccant holder

Filament Items

Miguel M.

This is a Modular and multi-size tape dispenser.I first designed this as a single size (3/4in) non modular dispenser, held together with screws. The comment I got the most was : were are the other sizes?I refined the design, corrected a few mistakes in the files and made the whole thing fully customizable. You can now make this thing as wide as you want, holding as many rolls of any size you need.<h4>Versions</h4>My original screwed version is still available for those who like the look of the screws. This version is unfortunately not modular, but is now available in all sizes.The Glued version is the modular version available for tape rolls ½ in, ¾ in, 1 in and 2 in wide tape.Both version have holes on the bottom that accept 6x3mm round magnet. This dispenser was originally designed to go on my metal toolbox… use as many or as little magnets as you want/need (or none at all).The Spindles accept standard 3inch (inside diameter) rolls.There are 2 versions of the frames. The old version is wider, that is the only difference. They both work the same. the newer version uses less plastic keeps the total width of the dispenser reasonable and obviously saved printing time. I recommend the old wider version if you are printing a single 1/2 inch roll dispenser to make it more stable.I made a second version of the front and back 2 inch spacers that has triangular openings. Again this saves plastic, but it also makes it look a lot lighter, airier, open…. both versions function the exact same. Your choice.<h4>Printing</h4>I print My dispensers in PLA<ul><li>0.2mm layers</li><li>10% grid infill</li><li>2 perimeters for glued version</li><li>3 perimeters minimum for screwed version in order to have more material to drill and tap the holes.</li></ul>To print a dispenser you will need:<ul><li>1 LH frame</li><li>1 RH frame</li><li>1 Spindle (select a size)</li><li>2 pins</li><li>1 front Spacer (select same size as spindle for spacers)</li><li>1 Mid Spacer</li><li>1 back spacer</li></ul>If you are printing a multi-roll dispenser you will need:<ul><li>1 separator for each additional size you want to add</li><li>A set of spacers of the desired width</li><li>A spindle and 2 pins of the desired width.</li></ul>I included a clip that can be used to screw down the dispenser and keep it from moving if desired.I included STL for all versions of every partG-codes included for glued version (Modular)<h3>UPDATE!!</h3>I have uploaded a new model that lets you print a heavier base for this dispenser. The base replaces the spacers and can be filled with material of your choice to add weight.<a target="_blank" href="https://makerworld.com/en/models/492593" rel="nofollow noopener">https://makerworld.com/en/models/492593</a><h3>Assembly</h3>&nbsp;Screwed version:You will need 12x 6-32 screws 5/8 long (7/8 long for the old version frames) this length works with the ½ inch spacers, you can use longer screws for the wider versions if you wish to do so.Open the pilot holes in the spacers to 0.1065 (no.36 drill) and tap the spacers. You need to tap half way from each side of the spacers.You can also use 3mm screws approx. 16mm long ( 22mm for old/wider version of the frames) pre drill to 2.5 mm before tapping.Do not over torque the screws, this is just plastic and only needs light tightening.&nbsp;Glued versionThis version is a bit more user friendly.The parts in the glued version all have spherical registrations to align the holes. The important thing is to make sure that you cleanup the semi spheres from any stringing or imperfection before assembly. A quick light pass with sand paper is sometimes a good idea on the “male” spheres. The “female” spheres are usually pretty clean.I use C.A. glue to put everything together, I imagine epoxy would work very well also.I use clamps to press everything together and close all the gaps, and this works very well.I suggest doing a full gluing sections all at once to make sure every thing is glued square and will fit correctly with the following section. ( If you are going the modular route)If you don&#39;t have access to clamp, weights can certainly do the trick.Insert the pins in the spindle, they should go in tight. If not, a drop of glue will fix that. If too tight a little bit of sand paper should do the trick.You will need a ½ inch wide hacksaw blade. Cut to required length and insert in slot. Fit should be tight.I included a clip that can be used to screw down the dispenser and keep it from moving if desired. I could not think of an elegant way to add weight to this so this clip might help screw it down to keep it from moving around. A clamp also works well on the side of a work bench. Check back soon for a hook I&#39;m thinking of to lock it into a surface/shelf/bench in one quick motion…. will add it within a few days.Cabinet door adhesive rubber bumpers also work great to help keep it in place.&nbsp;That&#39;s a lot of info… don&#39;t hesitate to post a message if anything needs clarification.Thanks for downloading this if you did and don&#39;t forget to post your make! I&#39;m always curious to see what people do with the stuff I post. Constructive criticism always welcome.And If you have a minute, check out my other models!&nbsp;&nbsp;

Tape Dispenser, Multi-size/Modular

Tools

Josh-3D

[update] 2024-07-01 - I added step files for both cases to the raw files. (Download STL in the dropdown above where you open in bambu studio or can download 3mf/stl files will show you all of the raw files available) <figure class="image image_resized" style="width: 36.53%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474983/design/2024-07-01_434f40da238c7.png">&#34;</figure><figure class="image image_resized" style="width: 30.84%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474983/design/2024-07-01_146ac6cdc4db9.png">&#34;</figure>[Introduction]A set of printable cases, slim and stylish, in two sizes! I originally set out to make a version of the case I did for my mega swatches, but sized for the original Bambu swatches. I really like this design though, and decided to make it a little more versatile yet. For each size I have a swatch insert (40 and 80 swatch capacity each), along with empty inserts for each too, so they can be used as a regular case! Unlike my other cases, this case design doesn&#39;t use a magnet to keep the lid closed, but instead relies on a friction fit. Having too lose of a hinge pin can make the fit less frictiony.&nbsp;[Tools &amp; Hardware]Hardware4 M2x8mm Self Tapping Screws (Bambu&#39;s BT2x8mm self tapping screws)2 2x13mm Dowel Pins (I used 2 of the brass dowel pins from Bambu. You can likely use a piece of filament too)&nbsp;[Assembly]&nbsp;Like with my other case, assembly is pretty straight forward.&nbsp;Start by sliding in the insert you&#39;d like to use, if you want a swatch box or just a regular case!<figure class="image image_resized" style="width: 57.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474983/design/2024-05-25_dff0722846c6f.png"></figure>&nbsp;Install the two screws into the end cap to fix it to the insert, and then put in the dowel for the hinge<figure class="image image_resized" style="width: 56.57%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474983/design/2024-05-25_c5dc4729320cd.png"></figure>Next, install the lid, then install the second dowel in place. Secure the other end cap in place and screw it tight.<figure class="image image_resized" style="width: 56.31%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000474983/design/2024-05-25_e507524c30501.png"></figure>&nbsp;That&#39;s it! Enjoy!-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you&#39;re looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.

Compact Multi-Use Case in two sizes

Storage

soarpix

<h2>Custom WILLYS JEEP</h2><ul><li>Complete model kit</li><li>Spinning wheels</li><li>This model does not need any additional non-3dprinted parts</li><li>The design is divided in many different parts in order to allow printing different parts with different colors</li></ul>If you want rim and tire separated you can find it here: <a target="_blank" href="https://makerworld.com/en/models/433445" rel="nofollow noopener">https://makerworld.com/en/models/433445</a>&nbsp;Resolution: 0,2 Supports: Yes Infill: 15% Filament Material: PLA&nbsp;If you have any questions, let me know in the comments or on my youtube channelHAPPY PRINTING!<h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2><h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000433442/design/2024-04-18_ega264w78jwu.jpg" alt="image">                <h2>Click here to wach the video =) <a target="_blank" href="https://youtu.be/eVaXzeeD8cM" rel="nofollow noopener">https://youtu.be/eVaXzeeD8cM</a></h2>

A1 Accessories

Props

Filament Items

Tools

Storage

Toys