3DHprint

Per Mejdal Rasmussen

Cable extension box using the WAGO 221 inline splicing connector.&nbsp;Benefits<ul><li>Compact.</li><li>Very strong strain relief.</li><li>Mountable with countersunk screws.</li></ul>How to make<ul><li>Print in PETG, because it is more fire retardant than ABS or PLA.</li><li>Insert WAGO 221-2401 or WAGO 221-2411 inline splicing connector.</li><li>Secure with M3 screws and nuts. Suggest screws are 14mm with hex head.</li></ul>If this model useful for you, please support me by clicking on the “Boost” button above.<ul><li>At 100 boots, I will make and release a model that can split the connection.</li></ul>&nbsp;Video:<figure class="media"><div data-oembed-url="https://youtu.be/SfNtMvaK5H4?si=KGLEgdQbKCcScEe7"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/SfNtMvaK5H4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Extension box for WAGO 221 splicing connectors

Wago

AU3D

This is an upgraded tray/shelf for IKEA Skadis, enhanced with custom-designed hooks crafted with minimal tolerances to ensure an exceptionally snug and secure fit. Except from removing the supports which takes about 5 seconds per shelf, these shelves do not need any post processing or glueing. There are 11 sizes ranging from 60mm to 260mm in width. Tray height: 25mm. Tray depth: 60mm<h3>Updates</h3>18.01.2024: Added trays for the 60-120mm range.<h3>Skadis Collection</h3>I am constantly developing more IKEA Skadis attachments. Check out my<a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/453266" rel="nofollow noopener">IKEA Skadis Shelves, Trays and Container</a><a target="_blank" href="https://makerworld.com/en/u/2942852598/collections/188108" rel="nofollow noopener">General IKEA Skadis Collection</a>

IKEA Skadis Container D60 H25

IKEA

schiko

I was asked if I could create a hotend holder similar to my <a target="_blank" href="https://www.printables.com/model/629756-skadis-34-nozzles-holder-for-bambu-lab-a1-mini" rel="nofollow noopener">existing version for the A1 (mini)</a>. So here it is, a holder for 3 or 4 assembled Bambu Lab hotends (X1…/P1…) for Ikea Skadis.&nbsp;No support needed. Just print as oriented in the stl files and take care that the pegs are massive. I used a modifier cube with 100% concentric infill (see print profile).&nbsp;The holder is quite flat, so I recommend using the <a target="_blank" href="https://makerworld.com/en/models/92747" rel="nofollow noopener">Skadis Lock Plug</a> (10mm) to prevent the holder from sliding out of the pegboard holes.

Skadis 3 / 4 Hotends Bambu Lab Holder

BambuLab

TechDino

Gingerbread man cookie cutter

Things to Make

Eldenroot

<h3>This is the remix of the <a href="https://www.printables.com/cs/model/208880-rapid-metric-screw-measuring-tool-m2-m5-up-to-50mm" rel="nofollow">Rapid Metric Screw Measuring Tool (M2-M5, up to 50mm)</a> from @fivesixzero.</h3>&nbsp;<h4>This is a SLIM version - shorter printing time, less weight, slim design… but top quality stays untouched! :)</h4>&nbsp;<h3>Remixed Things</h3>I made few changes, notably:<ul><li>reduce the Z-axis length by 45 % (only 6 mm!)</li><li>remove recesses on the bottom for threaded heat-set inserts</li><li>change the design of the holes for attaching magnets to regular hole</li><li>change the height of recesses on the bottom for M2-M5 nuts to follow reduced length of the tool</li><li>few small visual tweaks in design (not important) …</li></ul><h3>Print instructions</h3><ul><li>PLA/PETG (preferred)</li><li>0,15mm layer height (Prusa Mini/Mini+) - Quality settings</li><li>0,4mm nozzle type</li><li>4 perimeters</li><li>enable generate support material for a printing bed - type “Snug”</li><li>avoid crossing perimeters enabled</li><li>15% infill; type “Gyroid”</li><li>seam position - type “Nearest”</li><li>all others stock (Prusament settings, PrusaSlicer 2.5.0)</li></ul>I have uploaded two types of files for printing:A) one-color print - mark the labels with permanent marker (no water soluble)B) two-color print - one color is for the body, the second color is for the labels&nbsp;You can also download included .stl/.step/.3mf/.f3d files for easier remixing! Choose what you prefer.&nbsp;If you like my work, please click to “Like” button. Thank you!

Rapid Screw Measuring Tool - SLIM edition

Tools

MakeUpOrganizer