3D-EXP

No print support, no post process needed!Just print, assemble and enjoy! :)Downloaded package includes:<ul><li>all necessary components</li><li>different clamp lengths for various countertop thickness (0.5 inch to 3.0 inch),</li><li>four sets of jaws for holding a variety of shapes</li><li>tools</li></ul>Please remember, steel screws will always be better than printed ones. If you decide to print them, please ensure to tighten them very gently. If you want to replace them, you will need standard Socket Head screws. (4pcs M6x0.8 - 8mm long and 4pcs M6x0.8 - 20mm long).I tested this vice printed with PLA-CF and it works great, but PET will work perfectly fine as well.For better thread quality, I recommend lower printing layers or simply use “variable layer height” in your slicer to print properly and fast.&nbsp;Step #1Print and assemble the vice screw.<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_1343d1b25fe4c.jpg">&nbsp;Step #2Measure the thickness of your countertop to which you want to install the vice and choose the appropriate clamp length for printing.<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_c5cb630cedaed.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_ec589e721a567.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_621b4acc5cfd8.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_08a2925cb801f.jpg"><img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_09703e5736a8a.jpg">&nbsp;Print and assemble the needed components for step 2.<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_b5ff4be6585ae.jpg">&nbsp;Step #3Print and assemble the bearing (16 rolls needed) or just print the solid bushing.<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-09_2c12dcac49883.jpg">&nbsp;Step #4Print out the remaining parts and assemble them.<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-11_7153b1fffe959.jpg">&nbsp;Important!When you install the bearing or bushing make sure the main screw turns easily, if not, loosen the bearing or bushing half a turn and check again.Secure the bearing or bushing with an additional nut.<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-11_89743b5779d35.jpg">&nbsp;Packet &#34;Step-4&#34; includes 2 options for the back part of the vice. Print only one depending on your preference (with or without packet for tools).<img src="https://makerworld.bblmw.com/makerworld/draft/849983/2024-03-11_6026910d03519.jpg">&nbsp;ENJOY :)

Vice 3.0" x 5.0" - 100% 3d printed.

Hardware

Bambu Lab Plates Holder for 1, 2 or 3 plates