01makes

<p>Pill organizer with removable containers, 3 different sizes</p><p>&nbsp;</p><h2>About</h2><p>I designed this after gathering some ideas for a pill organizer that:</p><ul><li>Has removable containers for each course of pills, making it easier to tip the pills out. </li><li>Comes in 3 different sizes, for 1 to 3 courses of pills per day. </li><li>Has a closing clip to secure the box from accidental spillage. The closing clip can also be opened and closed with one hand. </li></ul><h2>Printing</h2><ul><li>The print profile that I&#39;ve uploaded has the parts for all 3 sizes of the organizer. Print only the parts you need, in the color scheme of your choice.</li><li>The print profile also has support and support blockers already configured.</li><li>If you download the raw files, please refer to my print profile on where to place the support and support blockers.</li><li>I recommend PETG but PLA will also work.</li></ul><h2>Assembly</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000192958/design/2024-02-19_10d0ab8730c1d8.jpeg"></figure><ul><li>The Lid and Closing Clip are attached to the organizer Body by pushing the rotating pins into place <u>firmly</u>.</li><li>If the fitment is too tight, you can file the pins slightly.</li></ul><p>&nbsp;</p><h4>I hope you&#39;ll find this useful. Please give a like to help others find this model. TYSM.</h4><p>&nbsp;</p><p>___</p><p>&nbsp;</p>

Pill organizer box removable containers, 3 sizes

Organizers and Boxes

<p>Ferris wheel kit card</p><p>&nbsp;</p><h2>About</h2><p>Easy to assemble kit card for a ferris wheel. Ferris wheel can be spun.</p><p>&nbsp;</p><h2>Printing</h2><p>The print profile contains both single- and two-color kit card print models. It also contains the individual parts in case you prefer to print without the kit card frame.  Both PLA and PETG may be used.</p><p>&nbsp;</p><h2>Assembly</h2><p>&nbsp;</p><p>Trim off the kit card frame (if you printed the kit card version).  The parts will snap fit together.  Use glue if you wish for a more permanent assembly, taking care not to affect the spinning function.</p><p>&nbsp;</p><p>&nbsp;</p><h3>Makes a great weekend project!</h3><p>I printed and gave one to my kid.  He assembled it himself, and played with it for some hours.  Then he decided to spend some time coloring it to his heart&#39;s content. Now he falls asleep spinning it, lol.   He has asked for a carousel next ;)</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000212279/design/2024-03-03_9699b6b23fe8b.jpeg"></figure><p>&nbsp;</p><h4>Have fun with the model, and please check out my other works!</h4>

Kit card - ferris wheel flyer

Games and Toys

<p>Car cabin decor - Giant dice</p><p>&nbsp;</p><h2>About</h2><p>80mm cube dice that can be hung in a car cabin.</p><p>&nbsp;</p><h2>Printing</h2><ul><li>No AMS required, just print the parts in different colors.</li><li>Please ensure your printer bed and selected filament have good adhesion.</li><li>There are two choices for the “1” side of the dice, a single dot pip or a heart shaped pip.</li><li>The print profile I&#39;ve uploaded has brim enabled for the dice body. If you are downloading the raw files, please refer to the print profile I&#39;ve uploaded for brim settings.</li><li>Depending on your climate, use materials that are suited for car cabins.</li></ul><h2>Safety</h2><ul><li><u>Ensure safety first if hanging the dice within the car cabin</u>: <ul><li>The dice should not create distractions for the driver or obstruct the driver&#39;s view.</li><li>The dice should not adversely impact other objects around it as the vehicle moves.</li><li>The string used should be shorten to not allow a small hand to pass through.</li><li>The materials used to print the dice should be suited for a car cabin under different weather conditions.</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000430288/design/2024-04-16_c34896541584d8.jpeg"></figure><h2>Assembly</h2><ul><li>After printing, remove the brim from the dice body. Using a deburring tool or file if necessary to get a nice finish.</li><li><strong>Do the following before inserting the pips!</strong><ul><li>Thread one end of a suitable string through the corner hole. Pull out the string end using the larger opening on the “1” face. A pair of tweezers will be helpful.</li><li>Tied a few dead knots to form a stopper.</li><li>Retract the knotted end into the dice.</li></ul></li><li>Install the pips.</li></ul><p>&nbsp;</p><h2> </h2><h4>Please check out my other models too, TYVM!</h4><p>&nbsp;</p><p>___</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Giant dice car cabin decor

<p>Charm Your Drinks</p><p>&nbsp;</p><h2>About</h2><ul><li>Set of dice themed stemware / drinkware charms - take a chance, be merry :)</li><li>Makes a great gift with the included storage box.</li></ul><h2>Printing</h2><ul><li>The print profile I've uploaded is ready for multi-color printing.</li><li>PETG recommended, but PLA will also work.</li><li>Both the charms and the gift box are in the print profile - print the parts you need.</li></ul><p>&nbsp;</p><p><strong>Hope you'll like this, and a like or follow will be most appreciated. TYVM!</strong></p><p>&nbsp;</p><p>---</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Charms dice ID tags for wine glasses, cups, mugs

Drinkware accessories

<p>Aquarium biological filter using filament purge media</p><p>&nbsp;</p><h2>About</h2><p>I&#39;ve always thought PETG filament purge waste will make great bio-media for aquarium filters.</p><p>&nbsp;</p><p>This model is an air pump driven filter that can be printed without supports and consists of only 2 parts. It is ideal for quarantine or smaller tanks.</p><p>&nbsp;</p><h2>Printing</h2><ul><li>Use PETG for both the filter and the bio-media.</li><li>Use good quality PETG to get a good print.</li><li>No supports are required.</li></ul><h2>Assembly and Use</h2><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/815995/2024-04-04_cb1e3127c5b91.jpeg"></figure><ul><li>Add a layer of rock gravel to the bottom of the filter, to weigh the filter down when underwater.</li><li>Pack the filter full with PETG filament purge waste.</li><li>Cap with the lid.</li><li>Connect the filter using standard 3/16&#34; / 4mm air tubing to an air pump.</li><li>Note: After placing the filter underwater, please tilt the filter slightly to allow trapped air under the cap to escape. </li><li><strong>Tip</strong>: Run a blowtorch over the filament purge waste before use, to get rid of any fine strings.</li></ul><p>&nbsp;</p><figure class="image"></figure><p>___</p><h4>Please check out my other models, TYSM!</h4><p>&nbsp;</p><p>___</p><p>&nbsp;</p><p>&nbsp;</p>

Aquarium fish tank biological filter

Aquarium

<h2>The Versatile Planter</h2><p>Easy to print, mix and match The Versatile Planter components to create your own plant displays.</p><ul><li>Hang-on-wall displays, or use with stands (in single, double, or triple displays)</li><li>Use as an outer planter, or print with the inner pot to plant directly</li><li>With optional plant tag that you can make easily with Bambu Lab's Make-My-Sign web tool</li><li>Print the planters in your own color combinations!</li><li>Slide-on holders lets you move your plants around, or switch between hanging or stand displays</li></ul><p>&nbsp;</p><h3>Printing</h3><p>There are 11 plates in the print profile I've provided. Print only the plates with The Versatile Planter components needed to make your very own planter.</p><p>&nbsp;</p><h3>Assembly</h3><p><u>Two hanger options:</u></p><ul><li>Fasten the hanger with screws (recommended) or with strong double-sided adhesive tape.</li></ul><p>&nbsp;</p><p><u>Two planter options:</u></p><ul><li>With plant tag slot</li><li>Without plant tag slot</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/382037/2023-12-21_96a72dddd1d15.jpeg"></figure><p><u>Two lid options:</u></p><ul><li>Lid with a 72mm diameter opening to put in your own suitably sized pot.</li><li>Lid with an inner pot so that you can plant directly in the planter.</li></ul><p>&nbsp;</p><p><u>Three stand options:</u></p><ul><li>Single stand</li><li>Double stand</li><li>Triple stand</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/382037/2023-12-21_e4ce0c40a0b198.jpeg"></figure><p><u>Assembling the inner pot:</u></p><ul><li>The inner pot base slides in at an angle from the bottom opening of the inner pot body. Fit in place with the flat side facing up.</li></ul><h3> </h3><h3>Plant tags</h3><ul><li>I've included a blank tag that you can print and write on with marker.</li><li>Alternatively, you can make your own plant tags using Bambu Lab's Make-My-Sign web tool: <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/en/makerlab/makeMySign</a></li><li>The tags should be 40mm wide, 30mm tall, and < 1mm thick to fit into the planter's tag slot.</li></ul><p>&nbsp;</p><h3>Safety and caution</h3><ul><li>Ensure safety when fixing the hangers: make sure the fasteners you are using is suited for the environment, and able to support the load, particularly when the planting media is wet.</li><li>Please check for water leakage/seepage after printing before use. The 3D printer and filaments you use will affect this greatly, and some experimentation is probably required.</li></ul><p>&nbsp;</p><p><strong>Have fun with this, and a like or follow will be most appreciated!</strong></p><p>&nbsp;</p><p>&nbsp;</p><p>___</p><p>&nbsp;</p>

The Versatile Planter - Hanging / standing planting pots

Flower Pots Planters

<p>Laundry Care Symbols Reference Guide - for Machine Wash and Dry</p><p>&nbsp;</p><h2>About</h2><p>This is a guide to the laundry care symbols that are printed on clothing tags, specifically for machine wash and dry. It does not cover non-machine wash/dry symbols. You can fix the guide to cabinets or walls with adhesive tape, hang it with hooks/screws, or use a display stand.</p><p>&nbsp;</p><p>&nbsp;</p><h2>Printing</h2><p>The print profile that I've uploaded:</p><ul><li>Is ready for two-color printing - use good quality filaments to get crisp text.</li><li>Has 2 versions of the guide: one without holes,  and one with holes for hanging.</li><li>Has an optional display stand for the guide.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/571770/2024-02-23_f4f8dbf5e72308.jpeg"></figure><p>&nbsp;</p><h4>Please give a like or follow if you find the model useful! TYSM.</h4><p>___</p><p>&nbsp;</p><p>&nbsp;</p>

Laundry Symbols Guide for Machine Wash / Dry

Laundry Guide

<p>Desk USB charging station plus cable organizer</p><p>&nbsp;</p><h2>About</h2><p>&nbsp;</p><p>I created this organizer to house my USB charger, with stands for my phone and Apple Watch, and additional routed cables for charging other devices. I&#39;ve also included a pencil holder attachment as an option.</p><ul><li>The organizer can hold a 8cm wide, 10cm long, and 3cm tall charger with space to plug in USB connectors and mains power.</li><li>For reference, the internal usable space of the organizer box is 165mm x 105mm x 40mm tall.</li></ul><p>&nbsp;</p><h2>Printing</h2><p>&nbsp;</p><p>The print profile I have uploaded has supports (and support blockers) set for the various parts. Print only the parts you require. If you download the raw files, please refer to my print profile for recommended support configuration.</p><p>&nbsp;</p><p>&nbsp;</p><h2>Assembly</h2><ul><li>Install the attachments (phone stand, watch charger stand, pen holder etc) to the organizer&#39;s lid. Start with the right most attachment, paying attention to the orientation and turning counter clockwise to lock into place.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_7dff21030e8538.jpeg"></figure><ul><li>Put your USB charger into the organizer</li></ul><p>&nbsp;</p><ul><li>Route the USB cables you will be using into the organizer box. Coil the excess length within the organizer box before plugging the connectors into the USB charger</li></ul><p>&nbsp;</p><ul><li>Fit the organizer lid to the box, taking care to align the tab that is on the lid with the box.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_59bfbabba80c7.jpeg"></figure><p>&nbsp;</p><ul><li>Finally cap the cable holes with the appropriate caps. There are 3 to choose from:<ul><li>Cap for a single cable</li><li>Cap for two cables, on opposing sides</li><li>Cap for two cables, on the same side</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_f7ae51ad47f628.jpeg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000160299/design/2024-01-29_fba24bcf72da8.jpeg"></figure><p>&nbsp;</p><h2>Design and share your attachments</h2><p>&nbsp;</p><p>Three attachments are provided in my design:</p><ol><li>Phone stand: this should fit most slab phones</li><li>Apple Watch charger stand</li><li>Pencil holder</li></ol><p>&nbsp;</p><p>If you wish to make your own attachments, for example, if you&#39;ve a non-Apple watch charger, I&#39;ve upload the model for the attachment base. The model can be found here: <a target="_blank" href="https://makerworld.com/en/u/1401660476" rel="nofollow noopener">https://makerworld.com/en/u/1401660476</a></p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><h4>A like or follow will be most appreciated to help others discover this model. TYSM!</h4><p>&nbsp;</p><p>__</p><p>&nbsp;</p>

USB charging station cable organizer desktop box 

USB charging station

<p>Blast from the past retro desk calendar</p><p>&nbsp;</p><h2>About</h2><p>&nbsp;</p><p>For manually-adjusted calendars, one important feature is the ease to change the day/month display daily. This perpetual desk calendar is designed with that in mind - the month and day digits can be individually adjusted using the respective wheels.</p><p>&nbsp;</p><p>I've chose a ‘retro, blast from the past’ design theme to reflect the age before electronic and digital calendars took over.</p><p>&nbsp;</p><h2>Printing and Assembly</h2><p>&nbsp;</p><p>With some patience, good quality filaments, and a well-tuned printer, you should be able to put together this desk calendar by following the assembly instructions below.</p><p>&nbsp;</p><ul><li>The print profile I've provided already has support enabled for the parts that require it.</li><li>There are two options in the print profile for the months/days wheels - single color (faster, easier to print) and multi-color (slower to print).</li></ul><p>&nbsp;</p><h3>Printing</h3><ul><li>Print out the parts in the color scheme of your choice.</li><li>Remove the support from parts that have it. The removal needs to be cleanly done, especially for mating surfaces.</li><li>The tolerances in the axle parts are intentionally tight to ensure a nice 'feel' when rotating the months/days wheels. Depending on your printer set up, some deburring or light sanding may be required to get a good fit.</li></ul><p>&nbsp;</p><h3>Assembly</h3><ul><li>Pair the axles to the months/days wheels as shown in the photo below.</li><li>Take care to orientate the text of the wheels correctly.</li><li>The axles will fit together relatively tight, while the wheels should freely rotate.</li></ul><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/382017/2024-01-09_d2105ac4abcf08.jpeg"></figure><p>&nbsp;</p><ul><li>The assembled wheels and axles should look like the photo below.</li><li>Take note that the slots of the face plate will line up with the wheels (for the next step).</li></ul><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/382017/2024-01-09_47634867c8167.jpeg"></figure><p>&nbsp;</p><p>In this step, follow this assembly order:</p><ol><li>Insert the shell of the body into the left end cap first.</li><li>Next, fit the face plate over the wheels and axles assembly. <u>Check that the correct side of face plate is facing outwards!</u></li><li>Then slide this whole assembly into the shell, towards the left end cap.</li></ol><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/382017/2024-01-09_02db02022339c.jpeg"></figure><p>&nbsp;</p><ul><li><u>Note</u>: If the supports for the face plate were not removed cleanly, you will encounter difficulty in the following steps.</li><li>Carefully slide the ‘ear’ of the face plate (with the wheels+axles assembly) into the left end cap.</li><li>Likewise, fit the right end cap on carefully.</li><li>The whole assembly should be rigid at this point for use.  (If you find the end caps too loose, you may apply a suitable amount of adhesive to the mating surfaces between the end caps, the shell, and the face plate).</li><li>Initially the wheels might feel a bit stiff when turning. This will smooth out after some use.</li></ul><p>&nbsp;</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/382017/2024-01-09_aec954702ab7c.jpeg"></figure><h4>Hope you'll like this and please check out my other models too. Thank you!</h4><p>&nbsp;</p><p>___</p>

Retro perpetual desk calendar

Calendars

<p>Year of the dragon - Dragon pearl tea light lamp / decor</p><p>&nbsp;</p><h2>About</h2><p>&nbsp;</p><p>I hope you'll like this dragon pearl themed decor.  You can use it as a mood lamp too using a 39mm / 1.5" diameter tea light.</p><p>&nbsp;</p><h2>Printing</h2><ul><li>You can print the various parts separately in different single colors, or print the parts in multicolor mode. Both options are provided in the optimized print profile I've attached.</li><li>If you are familiar with the split, assemble and coloring functions in Bambu Studio, you can make your own color schemes for the dragon.</li></ul><p>&nbsp;</p><h2>Assembly</h2><ul><li>Print out the parts in the colors of your choice</li><li>Remove the supports <u>thoroughly.</u> </li><li>Insert the Head into the Body (1). Use a dab of glue if necessary to secure.</li><li>Slide the Body into the Base (2).</li><li>Insert a tea light into the Base (3) if you wish to use one.</li><li>Finally fit the Pearl onto the base (4).</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/520427/2024-01-18_07d975bfed2b48.jpeg"></figure><h4>Have a healthy and prosperous Year of the Dragon!</h4><p>Please like or follow if you like this model - it helps others to discover this model. Thank you!</p>

Dragon Lantern Lamp with Pearl Decor

Lamps

<p>“Best Dancer” Trophy!</p><p>&nbsp;</p><h2>About</h2><p>I created this “Best Dancer” trophy for Maker World's Trophy Design Competition and based it on one of my favorite movies. If you know the movie, name it in the comments :)</p><p>&nbsp;</p><h2>Features</h2><p>The trophy has a simple rotating mechanism. There are 2 choices for the trophy figurine to suit the recipient, and the figurines can be printed in multi-color.</p><p>&nbsp;</p><h2>Printing</h2><p>The print profile I've provided has the necessary settings, including supports for one part. The figurine has also been colored for multicolor printing.</p><p>&nbsp;</p><h4>Have fun with the trophy and please do follow or like if you enjoy my work.</h4><p>---</p>

Trophy for Best Dancer

Best Dancer Trophy!

<p>Espresso coffee drinks quick reference guide</p><p>&nbsp;</p><h2>IMPORTANT</h2><p>I've uploaded a newer version of this model.  You can find it here:</p><p><a target="_blank" href="https://makerworld.com/en/models/164409#profileId-180491" rel="nofollow noopener">https://makerworld.com/en/models/164409#profileId-180491</a></p><p>&nbsp;</p><p>&nbsp;</p><p>___</p><p>&nbsp;</p><p>&nbsp;</p><h4>About</h4><p>I created this to quickly reference the ratios of popular espresso-based drinks.</p><p>&nbsp;</p><p>For example if you pull a 60ml / 2 fluid ounces double espresso to make a macchiato, you would add about 30ml / 1 fluid ounce of steamed milk . And of course, this is just a guide; you can always adjust to have coffee your way.</p><p>&nbsp;</p><p><strong>Printing</strong></p><p>&nbsp;</p><p>Please use a good quality filament to get crisp text.</p><p>&nbsp;</p><h4>Have a good cuppa, and a like or follow will be most appreciated!</h4><p>&nbsp;</p><p>---</p><p>&nbsp;</p><p>&nbsp;</p>

Espresso coffee drinks quick reference guide

Coffee

<h2>The Versatile Dial-A-Sign: a highly customizable sign holder</h2><p>&nbsp;</p><p><u>Make your own unique signage easily</u> with Bambu Lab's Make My Sign.</p><p>&nbsp;</p><p><u>Use different pointers to suit the display</u>. I've included 3 but you're welcome to model your own.</p><p>&nbsp;</p><p><u>Print the parts in the color scheme you need</u>. With an AMS, the signs can be multi-colored, or color the sign with markers.</p><p>&nbsp;</p><p>&nbsp;</p><h3>Assembly</h3><ol><li>Remove the supports from the printed Dial-A-Sign base.</li><li>To insert the slider, press down on the slider frame <u>at the mid-section</u>, insert the slider bottom first and it'll pop into place.<img src="https://makerworld.bblmw.com/makerworld/draft/382015/2023-12-01_e72e6ad40aac2.jpeg"></li><li>Insert the pointer you wish to use, pop in the sign, and you're good to go.</li></ol><p>&nbsp;</p><h3>Bambu Lab Make-My-Sign Web Tool</h3><ol><li>Sample signs I'd created can be found here: <a target="_blank" href="https://makerworld.com/en/models/79649#profileId-84279" rel="nofollow noopener">https://makerworld.com/en/models/79649#profileId-84279</a></li><li>To make your own signs using Bambu Lab's Make My Sign web tool, go here: <a target="_blank" href="https://makerworld.com/en/makerlab/makeMySign" rel="nofollow noopener">https://makerworld.com/en/makerlab/makeMySign</a></li><li>The sign should be 150mm wide. I suggest a height of 80mm to start with. Keep the bottom 40mm of the sign blank.<img src="https://makerworld.bblmw.com/makerworld/draft/382015/2023-12-01_847aa39ae72258.png"></li></ol><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p><strong>Have fun with this, and a like or follow will be most appreciated!</strong></p><p>&nbsp;</p><p>___</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p>

Dial-A-Sign - Versatile sign display - Customizable with Make-My-Sign

Dial-A-Sign

<p>Based on / remixed from:</p><p><a target="_blank" href="https://makerworld.com/en/models/65419#profileId-68754" rel="nofollow noopener">https://makerworld.com/en/models/65419#profileId-68754</a></p><p>&nbsp;</p><h4>About</h4><p>This version is designed to be attached to the corners of furniture like wall cabinets, fittings like mirrors, or appliances like TVs.</p><p>&nbsp;</p><h4>Easy print</h4><p>Ideal for multi-color printing, and print profile is already optimized to minimize color swaps!</p><p>&nbsp;</p><p>___</p><p>&nbsp;</p>