Redemption Arc
Print Profile(1)
Description
This is my second design using Hueforge!
It speaks to the delicate nature of feminine beauty.
You might notice that I added a 200x200 frame in one of the pictures.
Found here on Makerworld, of which there are a several to choose from.
The one I used needed a few drops of glue, but if you would like to use that one, you can find it here:
https://makerworld.com/en/models/106720#profileId-118126
Please leave a comment if you print it! Any constructive feedback would be much appreciated.
I'm still learning, but wanted to give something back to the community of epic creators I've discovered here.
Cheers!
-//Technical jazz:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
The Model is 200x200mm in size.
You may print at higher layer heights below the Min Depth of 0.48mm.
The Max Depth is 2.2mm and the Actual Depth is 2.3mm.
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments.
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Blue Gray
At layer #13 (1.12mm) swap to White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)