Magnetic Phone Mount Opel Corsa C CDR 2005 and others
Print Profile(1)

Description
Magnetic Universal Opel Radio CDR 2005 Mount
A vehicle change necessitated the design of a new phone mount. The Corsa's radio conveniently provided the necessary screw holes for this application.
I conceived this mount for magnetic attachment.
Printed using PETG and incorporating five 18x5 neodymium power magnets, it securely holds my Pixel 7a in both portrait and landscape orientations.
Prior to magnet insertion, arrange four magnets in a square to determine their polarities. Subsequently, insert the magnets sequentially. The bottom cover is superfluous; the magnets maintain their position within the mount.
A compatible magnetic case for the Pixel 7a is available here.
Attachment is straightforward: Remove the two grub screws from the radio and affix the mount using two M4x6mm countersunk screws. Alternative screw lengths may also suffice.
Enjoy printing and using your new mount.
Your support is appreciated; a like or boost would be delightful.
Feel free to contact me with any inquiries.
Boost Me (for free)
If you appreciate my work, a like, boost, comment, and make would be most welcome…
Positive feedback motivates me to create further exceptional designs :-)
______________________________________________________
Magnetic Universal Opel Radio CDR 2005 Holder
Due to a change of vehicle, a different cell phone holder had to be designed. The Corsa's radio already had the necessary screw holes that I used for the holder.
I designed the holder for magnetic mounting.
Printed in PETG and equipped with 5 pieces of 18x5 neodymium power magnets, it holds my Pixel 7a both vertically and horizontally.
Before inserting the magnets, you should first lay 4 of them together in a square to determine the polarity. Then insert the magnets one by one. The bottom cover is not needed as the magnets hold themselves in the holder.
You can find a suitable magnetic cover for the Pixel 7a here.
Fastening is very simple: Remove the 2 grub screws from the radio and screw the holder tight with 2 countersunk screws M4x6mm. Other screw lengths may also fit.
Enjoy printing and using your new holder.
If you want to support me, I would be happy about a Like / Boost.
If you have any questions, just let me know.
Boost Me (for free)
If you like my work, I would be very happy about a Like, Boost, comment, and Make… With your reviews, you support and motivate me to design more great things :-)
Use at your own risk !
Small parts can be swallowed. Use only under adult supervision.
I assume no responsibility !






























Comment & Rating (0)