Pokemon-Valentine Pikachu (NO SUPPORT) by SnapPrint3D_SuperCrazyPrints

SnapPrint3D_SuperCrazyPrints

Toys & Games>Characters

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.16mm layer, 2 walls, 15% infill

Designer

7.1 h

1 plate

4.8(102)

Color fixed w/ brim, 0.16mm layer, 3 walls, 15% infill

8.9 h

1 plate

4.9(19)

Single Color at 0.16mm layer, 2 walls, 15% infill

48 min

1 plate

4.9(12)

(PLA Profile) 0.2mm layer, 2 walls, 5% infill

11.9 h

1 plate

4.7(11)

Click to see more

Boost

470

845

164

2.9 k

1.2 k

Released

Description

Sign up Membership to get 15+ models every month. All models 3D Print Without Supports and (3MF,STL) file ready!
https://www.supercrazyprints.com/

Check out my other models:
https://cults3d.com/en/users/Scrazyone_SnapPrint3D/3d-models

Comment & Rating (164)

@mysstra

Print Profile

Color fixed w/ brim, 0.16mm layer, 3 walls, 15% infill

chulisimos!!

@imalefty05

Print Profile

0.16mm layer, 2 walls, 15% infill

One small issue on the face/nose. Printed the same on every one i printed. Also a little bit of a color bleeding issue. Overall, awesome though!

@MegJx

Print Profile

Single Color at 0.16mm layer, 2 walls, 15% infill

I’m not sure what happened with this one. new filament type.

@papaw3DPrintFun

Print Profile

0.16mm layer, 2 walls, 15% infill

The print is nice and love the design, but there are definite settings that need to be figured out and adjusted before printing. First thing remember to paint the bottom of the heart or it will have a yellow first layer. secypu will need to do some purge testing and adjust the setting or you will get red and black banding. Again over all great design.

@DMTaino

This right here is the main reason why I personally always look over painted items [from others] before sending it. Also check the flushing, to make sure the bleeding doesn't happen like it did for you. :/

(Edited)

@bayfaire

Print Profile

0.16mm layer, 2 walls, 15% infill

Turned out great! Decided to paint it to for mothers day

@martygirl35

Print Profile

0.16mm layer, 2 walls, 15% infill

These were super fun, and a big hit with the neighborhood kids. I shrunk them down a bit (between 1-1 1/2 inches each), printed a ton of them and left them at the community park for all the kids on Valentine's Day. I also do Geocaching and I hide them around town. People really love finding them. Thanks for sharing!

@klue777

Print Profile

For All Multicolor x1-x28 or big 175cm - 3 plates - 0.16mm layer, 2 walls, 15% infill

Fun print - be aware to print a brim, had minor difficulties with several initial “heart” layers sticking to the plate until i added the outside brim.