Filament Dry Box w Desiccant Container +Hygrometer

Based on the model Filament Dry Box with silica and humidity sensor by lucas16592 I did some minor modifications:

• Enlarged frame on the front to give the spool holder more stability in the cereal box
• Modified hygrometer holder to improve the fit of the humidity sensor
• Changed filament output port to the top (with TPU filament plug and seal) instead of back side (with PTFE tube)

For easier printing I splited the DIY filament dry box kit in 2 print profiles:

1. Print Profile can be printed in PLA, PETG, ABS or any other material
   1. 1x Desiccant Container
   2. 1x Spool Holder
   3. 2x Rolls
2. Print Profile is reccomended to print in TPU
   1. 1x Filament_Plug
   2. 1x Seal for PTFE Fitting PC4-M10

In addition to the above listed self-printed parts the following hardware is needed (per unit)*:

• 1x Storage boxe: https://www.amazon.de/dp/B0CPP5KGJ4?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
• 1x Thermometer Hygrometer https://www.amazon.de/dp/B0BD7MGXMM?ref=ppx_yo2ov_dt_b_fed_asin_title
• 1x PC4-M10 PTFE Tube Fitting Connector: https://www.amazon.de/dp/B07SKX5P9P?ref=ppx_yo2ov_dt_b_fed_asin_title
• 1x Nut M10x1 SW12 H.3 mm ISO Fine Thread DIN 13-5: https://www.amazon.de/dp/B0CQJWW9M4?ref=ppx_yo2ov_dt_b_fed_asin_title
• 4x Ball Bearings 608 ZZ: https://www.amazon.de/dp/B09SPVM8F7?ref=ppx_yo2ov_dt_b_fed_asin_title
• 250g Silica Gel: https://www.amazon.de/dp/B00NLPA7HW?ref=ppx_yo2ov_dt_b_fed_asin_title

* Links to the parts I purchased. Depending on your personal preference or availability in your region other/similar parts might be better suited.