Pegs for A1 Mini Tool Box
Copyright Claim
Pegs for A1 Mini Tool Box
Boost
163
313
134
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
27 min
1 plate
Boost
163
313
134
4
680
708
Released
Description
A set of pegs for the A1 Mini Tool Box:
https://makerworld.com/en/models/65527#profileId-68895
I didn't have any M3x30 screws at hand, so made a quick set of printet pegs instead.
Size:
Height: 31mm
diameter: 4 for the first 1mm and 3 for the remaining 30mm
Since the original print is made for screws I had to use a 3mm drill to make the holes a bit larger.
Comment & Rating (134)
All
Print Profile
0.2mm layer, 2 walls, 15% infill
ok
0
Reply
Came out great and fits nice and snug into the box
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
eventually went in but required a lot of force.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
works but should be a little thinner on the end to make them fit without drilling the holes first
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect size!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Worked as intended!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Perfectos para la caja de repuestos de la A1.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
it worked great since I don't have that type of bolt so this came in handy!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
The pegs are clean and easy to print, but require drill to enlarge the hole a little bit to install. So I gave up and bought m3x30
0
Reply
License
This work is licensed under a
Creative Commons AttributionRelated Models
© 2024 MakerWorld