Samsung Galaxy S24+ (plus) Halloween case v3
Print Profile(1)
Description
Description
This is my third Samsung Galaxy S24+ (plus) Halloween case version 3.
No support is required in the slicer settings :-)
The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or difficult depending on how good the material and printer are.
I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.
See also Hexagon version 1 --> https://makerworld.com/en/models/591443
and new Voronoi version 2 --> https://makerworld.com/en/models/602163
Boost Me (for free)
If you love my work, consider boosting the model as well.
Your likes and 5-star reviews are greatly appreciated and help a lot.
If you enjoy this model, be sure to check out my other creations :-)
Happy Printing and Halloween
Toni :-)
-------------------------------------------------------------------------------------------------------------------------------------------------------------
This is my third Samsung Galaxy S24+ (Plus) Halloween case version 3.
No support is required in the slicer settings :-)
The green parts in the picture are the supports for easy printing and must be removed after. Removing can be easy or difficult depending on how good the material and printer are.
I use filament TPU shore 95A and slicer temperatures -> nozzle: 220 °C, bed: 50 °C. For a good TPU print the filament should be dry.
See also Hexagon version 1 --> https://makerworld.com/en/models/591443
and new Voronoi version 2 --> https://makerworld.com/en/models/602163
Happy Printing and Halloween
Toni :-)
License
Comment & Rating (11)