Modular drawer system
Print Profile(1)
Bill of Materials
- Ruthex_RX-M4x8.1 x 34: Threaded_insert.M4.
- M6S 6x50(Full thread) x 4: Hex_Head_Bolt_M6x50(full_thread)
- Ruthex_RX-M5x9.5 x 4: Threaded_insert.M5.
- Ruthex-M6x12.7 x 4: Threaded_insert.M6.
- MC6S 5X16 x 4: Socket_Head_Screw
- MFSS 4x12 x 36: Countersunk_Screw_M4x12
Description
This is a modular drawer system that fits wherever a few drawers could be needed. In my example pictures we have it in the bathroom. It can stand on the floor or it can be bolted under a desktop board. Or both. Just use the pieces that fits the actual needs. The feet are individually adjustable in height and I recommend to use a 50mm long M6 Hex Bolt that is threaded all the way (in the leg assembly).
I used PLA but PET-G would work just fine. I bought the TPU feet but I also submitted a similar foot that can be printed.
Documentation (2)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (22)