T-Nuts Mounting System for Ikea Skadis Pegboards
Print Profile(2)
Bill of Materials
Description
This is a remake of the awesome Skadis T-Nuts Mounting System for Ikea Skadis Pegboards by 6d6178.
I wanted to use M2 heat sets rather than nuts so that was the original goal. I saw room for some minor improvements so I redesigned the original version as well.
I designed this model to use M2 heat set inserts with a length of 4mm and an outer diameter of 3.6mm but have successfully used shorter (3mm) and thinner (3.2mm) heat set inserts. Here's the heat set inserts I'm currently using:
M2 x 4.0mm L x 3.6mm OD (Amazon affialiate link)
M2 x 3.0mm L x 3.6mm OD (Amazon affialiate link)
I've included two adapter plates that you can use to incorporate the t-nuts into your own models.
Please see the original model for much more details and an excellent write-up on the Ikea Skadis system in general.
Warning: If you print a third party profile you may not be getting the latest version or the highest quality print.
If you like this project, please don't forget to ❤ Like, ★ Rate, and 🚀 Boost!
Boost Me (for free)
If you find this model useful please consider sending a boost my way as it really encourages me to keep designing.
* Some of the links above may be affiliate links
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)