f-47

This 3D print shows a well-made model with solid detail, but also some typical 3D printing characteristics you can improve if you want it even cleaner.

🔍 What’s good about the print

• Shape accuracy: The stealth design and sharp angles came out really well, which can be hard to print.
• Consistent layers: The layer lines are even, meaning your printer is calibrated pretty well.
• Good structural print: No major warping or failed sections—everything looks solid and complete.

⚠️ Things you can improve

• Visible layer lines: You can clearly see horizontal lines across the body.
  • Fix: lower your layer height (like 0.12–0.16 mm instead of 0.2)
• Surface roughness: Some areas look slightly uneven or textured.
  • Fix: slow down print speed or increase wall count
• Edges not perfectly sharp: Stealth planes have crisp edges, but 3D prints can round them slightly.
  • Fix: adjust cooling + print orientation
• Minor imperfections/blobs: Small bumps or inconsistencies in spots
  • Fix: tune retraction and temperature

🛠️ If you want it to look INSANE (pro level)

• Sand it (start ~200 grit → go up to 600+)
• Use filler primer spray
• Sand again and paint matte black
• Optional: add decals or dry brushing for realism

🧠 Overall

This is a really solid print—especially for something with this shape. It looks like a clean prototype or display model already, and with a little finishing, it could look like something straight out of a model kit or even a museum display.